Tile Roof Installation cost: Murray vs West Valley City (2026)
In 2026, Murray and West Valley City land on nearly identical tile roof installation pricing — about $17,700 either way.
Murray UT
Typically around $17,700
West Valley City UT
Typically around $17,700
Murray vs West Valley City: full breakdown
| Factor | Murray | West Valley City |
|---|---|---|
| Typical 2026 cost | $17,700 | $17,700 |
| Estimated range | $10,550–$24,800 | $10,550–$24,800 |
| Labor index (vs US) | ×0.98 | ×0.98 |
| Climate zone | Cold | Cold |
| Climate factor | ×1 | ×1 |
| Local permit | $275 | $275 |
| Labor share | $10,600 | $10,600 |
| Materials/equipment | $7,100 | $7,100 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Basically a tie — focus on the contractor
Neither metro has a cost edge on tile roof installation — spend your decision-making energy on the contractor, not the location.
Tile roof installation by type: Murray vs West Valley City
We localize each tile roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Murray | West Valley City |
|---|---|---|
| Concrete tile | $10,550–$20,850 | $10,550–$20,850 |
| Clay / terracotta tile | $14,000–$27,750 | $14,000–$27,750 |
| Slate | $19,900–$49,300 | $19,900–$49,300 |
These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.
Tile roof installation by roof size: Murray vs West Valley City
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Murray | West Valley City |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,150–$14,000 | $7,150–$14,000 |
| 1,500 sq ft (15 squares) | $9,100–$18,900 | $9,100–$18,900 |
| 2,000 sq ft (20 squares) | $10,550–$24,800 | $10,550–$24,800 |
| 2,500 sq ft (25 squares) | $13,050–$29,700 | $13,050–$29,700 |
| 3,000+ sq ft (30 squares) | $15,950–$35,600 | $15,950–$35,600 |
All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
With labor making up about 60% of a tile roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Murray vs West Valley City
Is tile roof installation cheaper in Murray or West Valley City?
There's no meaningful difference: tile roof installation runs about $17,700 in both places.
Why does tile roof installation cost more in West Valley City than Murray?
The main driver is local labor rates: West Valley City's labor index is 0.98 versus 0.98 in Murray. Climate zone (cold vs cold) also shift the total.
How much is tile roof installation in Murray, UT?
tile roof installation in Murray runs $10,550–$24,800 as of 2026 — most jobs land near $17,700.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $30.1/hr around Salt Lake City-Murray versus $30.1/hr near Salt Lake City-Murray. With labor making up about 60% of a tile roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy tile roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Murray and West Valley City, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on tile roof installation cost?
Not on this basis — Murray and West Valley City cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik