Tile Roof Installation cost: Murray vs Orem (2026)
Murray runs 1% higher than Orem for tile roof installation — expect around $17,700 in Murray against $17,500 in Orem, a difference of about $200.
Murray UT
Typically around $17,700
Orem UT
Lower costTypically around $17,500
Murray vs Orem: full breakdown
| Factor | Murray | Orem |
|---|---|---|
| Typical 2026 cost | $17,700 | $17,500 |
| Estimated range | $10,550–$24,800 | $10,450–$24,550 |
| Labor index (vs US) | ×0.98 | ×0.97 |
| Climate zone | Cold | Cold |
| Climate factor | ×1 | ×1 |
| Local permit | $275 | $275 |
| Labor share | $10,600 | $10,500 |
| Materials/equipment | $7,100 | $7,000 |
Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.
Is the price difference a dealbreaker?
A 1% difference on tile roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Tile roof installation by type: Murray vs Orem
Every tile roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Murray | Orem |
|---|---|---|
| Concrete tile | $10,550–$20,850 | $10,450–$20,650 |
| Clay / terracotta tile | $14,000–$27,750 | $13,850–$27,450 |
| Slate | $19,900–$49,300 | $19,700–$48,800 |
All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.
Tile roof installation by roof size: Murray vs Orem
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Murray | Orem |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,150–$14,000 | $7,050–$13,850 |
| 1,500 sq ft (15 squares) | $9,100–$18,900 | $9,000–$18,700 |
| 2,000 sq ft (20 squares) | $10,550–$24,800 | $10,450–$24,550 |
| 2,500 sq ft (25 squares) | $13,050–$29,700 | $12,900–$29,400 |
| 3,000+ sq ft (30 squares) | $15,950–$35,600 | $15,800–$35,200 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
About 60% of a tile roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
No BLS metro wage series for Orem; we use Utah regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
Storm season pushes demand — and prices — up through summer, since shingles need warm, dry weather to bond correctly. Roofers with open winter calendars will often deal to fill a spring slot.
Where does a smart roofing budget go in 2026?
Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Murray vs Orem
Is tile roof installation cheaper in Murray or Orem?
Yes — Murray costs more. Expect around $17,700 for tile roof installation there against $17,500 in Orem, about $200 (1%) apart in 2026.
Why does tile roof installation cost more in Murray than Orem?
Labor rates explain most of it — 0.98 in Murray vs 0.97 in Orem. A cold climate versus cold accounts for the rest.
How much is tile roof installation in Murray, UT?
In Murray, tile roof installation typically runs $10,550–$24,800 in 2026, with most homeowners paying around $17,700.
When is the cheapest time to buy tile roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Murray and Orem (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on tile roof installation cost?
Not really — the $200 gap is one-time, and smart timing and tighter quotes in Murray can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik