Tile Roof Installation cost: Murray vs Salt Lake City (2026)
Murray and Salt Lake City are a near-perfect match on tile roof installation cost in 2026, both landing around $17,700.
Murray UT
Typically around $17,700
Salt Lake City UT
Typically around $17,700
Murray vs Salt Lake City: full breakdown
| Factor | Murray | Salt Lake City |
|---|---|---|
| Typical 2026 cost | $17,700 | $17,700 |
| Estimated range | $10,550–$24,800 | $10,550–$24,800 |
| Labor index (vs US) | ×0.98 | ×0.98 |
| Climate zone | Cold | Cold |
| Climate factor | ×1 | ×1 |
| Local permit | $275 | $275 |
| Labor share | $10,600 | $10,600 |
| Materials/equipment | $7,100 | $7,100 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Basically a tie — focus on the contractor
With no real price gap on tile roof installation, the choice comes down to contractor quality and timing, not which city you're in.
Tile roof installation by type: Murray vs Salt Lake City
Below, each tile roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Murray | Salt Lake City |
|---|---|---|
| Concrete tile | $10,550–$20,850 | $10,550–$20,850 |
| Clay / terracotta tile | $14,000–$27,750 | $14,000–$27,750 |
| Slate | $19,900–$49,300 | $19,900–$49,300 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national tile roof installation range for local labor, climate and permits.
Tile roof installation by roof size: Murray vs Salt Lake City
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Murray | Salt Lake City |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,150–$14,000 | $7,150–$14,000 |
| 1,500 sq ft (15 squares) | $9,100–$18,900 | $9,100–$18,900 |
| 2,000 sq ft (20 squares) | $10,550–$24,800 | $10,550–$24,800 |
| 2,500 sq ft (25 squares) | $13,050–$29,700 | $13,050–$29,700 |
| 3,000+ sq ft (30 squares) | $15,950–$35,600 | $15,950–$35,600 |
Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.
What roofing pros earn in each metro
With labor making up about 60% of a tile roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Murray vs Salt Lake City
Is tile roof installation cheaper in Murray or Salt Lake City?
tile roof installation costs about the same in both — roughly $17,700 in each city.
Why does tile roof installation cost more in Salt Lake City than Murray?
Salt Lake City's higher labor index (0.98 vs 0.98 in Murray) is the biggest factor, with the cold/cold climate split playing a smaller role.
How much is tile roof installation in Murray, UT?
In Murray, tile roof installation typically runs $10,550–$24,800 in 2026, with most homeowners paying around $17,700.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $30.1/hr in the Salt Lake City-Murray area and $30.1/hr in Salt Lake City-Murray. Given labor is around 60% of a tile roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy tile roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Murray and Salt Lake City (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on tile roof installation cost?
There's no cost argument here between Murray and Salt Lake City — they're a wash. Focus on contractor reputation, project scope, equipment tier and timing.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik