Tile Roof Installation cost: Murray vs Provo (2026)
Budget-wise, tile roof installation in Murray ($17,700) runs 1% more than in Provo ($17,500), a roughly $200 spread.
Murray UT
Typically around $17,700
Provo UT
Lower costTypically around $17,500
Murray vs Provo: full breakdown
| Factor | Murray | Provo |
|---|---|---|
| Typical 2026 cost | $17,700 | $17,500 |
| Estimated range | $10,550–$24,800 | $10,450–$24,550 |
| Labor index (vs US) | ×0.98 | ×0.97 |
| Climate zone | Cold | Cold |
| Climate factor | ×1 | ×1 |
| Local permit | $275 | $275 |
| Labor share | $10,600 | $10,500 |
| Materials/equipment | $7,100 | $7,000 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
How much should this gap actually matter?
1% is within noise for tile roof installation — contractor selection and timing move the price more than which of these two metros you're in.
Tile roof installation by type: Murray vs Provo
Each tile roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Murray | Provo |
|---|---|---|
| Concrete tile | $10,550–$20,850 | $10,450–$20,650 |
| Clay / terracotta tile | $14,000–$27,750 | $13,850–$27,450 |
| Slate | $19,900–$49,300 | $19,700–$48,800 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Tile roof installation by roof size: Murray vs Provo
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Murray | Provo |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,150–$14,000 | $7,050–$13,850 |
| 1,500 sq ft (15 squares) | $9,100–$18,900 | $9,000–$18,700 |
| 2,000 sq ft (20 squares) | $10,550–$24,800 | $10,450–$24,550 |
| 2,500 sq ft (25 squares) | $13,050–$29,700 | $12,900–$29,400 |
| 3,000+ sq ft (30 squares) | $15,950–$35,600 | $15,800–$35,200 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
About 60% of a tile roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Salt Lake City-Murray metro · about 3% below the US average installer wage.
No BLS metro wage series for Provo; we use Utah regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.
Murray vs Provo
Is tile roof installation cheaper in Murray or Provo?
Yes — Murray costs more. Expect around $17,700 for tile roof installation there against $17,500 in Provo, about $200 (1%) apart in 2026.
Why does tile roof installation cost more in Murray than Provo?
Labor rates explain most of it — 0.98 in Murray vs 0.97 in Provo. A cold climate versus cold accounts for the rest.
How much is tile roof installation in Murray, UT?
Expect to pay $10,550 to $24,800 for tile roof installation in Murray in 2026, averaging around $17,700.
When is the cheapest time to buy tile roof installation — and does it differ by city?
The best window is the same in both Murray and Provo: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on tile roof installation cost?
Rarely. The $200 difference is real but one-time, and you can often close most of it in Murray by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik