Roofing · Murray, UT
How much does tile roof installation cost in Murray, UT? (2026)
In Murray, tile roof installation runs $10,550–$24,800, with most paying around $17,700 — in line with the national average. Installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $17,700
- Typical cost
- $17,700
- Labor vs US
- −4%
- Climate
- Cold
- Local permit
- $275
Refine your estimate
Tune it to your home to narrow the tile roof installation range.
Key takeaways for Murray
- In Murray, tile roof installation runs $10,550–$24,800 — call it $17,700 for a typical job, in line with the national average.
- The −4% gap between Murray and national labor rates is the single biggest reason this price isn't the national average.
- The estimate already covers the Roofing permit — roughly $275 in Murray.
- A well-installed job here typically lasts 50–100 years — plan the next replacement instead of waiting for an emergency one.
- Time it right and you can save 5–10%: the best window to book is Late spring to early fall (dry, 45–85°F).
What goes into the price in Murray
A typical Murray tile roof installation of $17,700 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Murray 2026 range |
|---|---|
| Materials & equipmentEquipment and supplies, which price out close to the national baseline. | $4,100 – $9,800 |
| Labor & installationRemoval, install and startup labor — the line most affected by where you live. | $6,175 – $14,725 |
| Permit & feesWhat this city's building department charges for a Roofing permit. | $275 |
| Total installed cost | $10,550 – $24,800 |
Split from the Murray estimate using a 60% local-labor share; line items sum to the total.
Why tile roof installation costs what it does in Murray
- Expect labor here to run 4% below the national norm (based on price levels for the Salt Lake City-Murray metro area) — that's what lowers the total.
- A Roofing permit in Murray costs around $275, included above.
Tile Roof Installation cost by roof size in Murray
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| roof size | Murray 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $7,150 – $14,000 |
| 1,500 sq ft (15 squares) | $9,100 – $18,900 |
| 2,000 sq ft (20 squares) | $10,550 – $24,800 |
| 2,500 sq ft (25 squares) | $13,050 – $29,700 |
| 3,000+ sq ft (30 squares) | $15,950 – $35,600 |
National size ranges localized to Murray labor and climate.
Tile Roof Installation cost by type in Murray
| Concrete tile | $10,550 – $20,850 |
| Clay / terracotta tile | $14,000 – $27,700 |
| Slate | $19,900 – $49,300 |
Adjusted to Murray from national type-level ranges.
Tile Roof Installation cost by efficiency in Murray
Concrete is the affordable workhorse; clay (terracotta) holds its color and resists fade in hot, sunny climates; slate is the premium natural-stone option with the longest life.
| Concrete tileLowest-cost tile; heavy; ~50 yr life | $10,550 – $19,900 |
| Clay / terracotta tileFade-resistant, ideal in hot/coastal climates; 50–100 yr | $14,000 – $24,800 |
| Natural slatePremium stone; 75–100+ yr life | $19,900 – $44,400 |
Labor vs. materials in Murray
Install crew, removal, permit & startup — the part Murray rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $17,700 Murray project; your mix varies with scope.
Skilled installers in the Salt Lake City-Murray area earn about $30.1/hr (3% below the US average, per BLS metro wage data) — the local wage is what moves the labor half of your tile roof installation cost.
How we estimate it
| National range | $10,500 – $25,000 |
| Murray labor adjustment | ×0.98 |
| cold climate factor | ×1 |
| Local permit | +$275 |
| Murray estimate | $10,550 – $24,800 |
Promo prices vs. the real cost
Roofing promotions spike after bad weather, and so does the gap between advertised and actual cost. Confirm scope first:
- Free roof inspection$0 — it's a sales visit
- Per-square teaser priceadvertised low; varies by pitch & material
- Financing offers$0 down · low APR
Additional tile roof installation costs to budget for
Expect a few of these rather than all. Which ones apply tracks with access, hidden damage and local code.
| Tear-off & disposal of old roofTile is heavy — disposal costs more than asphalt | $1,000 – $4,000 |
| Structural reinforcement for tile weightOften required; tile is much heavier than asphalt | $1,000 – $10,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-grade, replaced mid-life)Underlayment wears out before the tile and is re-done | $500 – $2,500 |
| Flashing, valleys & ridge work | $500 – $2,500 |
| Permit | $200 – $600 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Labor, cleanup and permit
- Tear-off and structural check
- Concrete or clay tiles
- Reinforced underlayment and battens
What affects the cost
- Specialty flashing and ridge work
- Pitch, complexity and hip/valley count
- Concrete vs clay tile
- Roof structure may need reinforcement for tile weight
Ways to save on tile roof installation in Murray
- Reuse intact tiles where possible on repairs
- Confirm framing can carry the load before buying
- Tiles last 50+ years — strong lifetime value
- Concrete tile costs less than clay with similar life
How long does tile roof installation last in Murray?
Concrete tile lasts ~50 years; clay and slate 75–100+. The underlayment beneath is usually replaced once mid-life.
Inspect for cracked or slipped tiles and clear debris; the bigger periodic cost is replacing worn underlayment.
Signs you need tile roof installation in Murray
- Cracked, chipped, or broken tiles after hail, foot traffic, or freeze-thaw
- Slipped or missing tiles leaving gaps in the field
- Leaks or attic moisture pointing to failed underlayment beneath sound tiles
- Efflorescence, deep staining, or flaking on the tile surface
- Sagging areas — a sign the structure is straining under the weight
- Failed flashing in valleys or around penetrations
Repair or replace in Murray?
Repair if…
- Only a handful of tiles are cracked or slipped
- The underlayment is still sound and leaks are isolated
- Flashing has failed but tiles and structure are fine
Replace if…
- The underlayment has failed across the roof (consider a lift-and-relay first)
- Widespread tile cracking or fading from age or hail
- The roof structure is sagging or can't support the load
Cost calculator
Roof cost by material in Murray, UT
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Murray, UT labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $6,850–$11,750 | $350/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $7,850–$15,700 | $450/yr |
Standing-seam metal High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $17,650–$31,350 | $450/yr |
Clay / concrete tileThis page Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $19,600–$39,200 | $450/yr |
Per-square ranges are national installed benchmarks localized to Murray, UT labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for tile roof installation in Murray
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Why tile roof installation quotes vary — and how to compare them fairly
When two quotes for one project diverge by thousands, the cause is usually what each one includes, not markup — here's how to read the difference.
Why a quote looks high (or low)
- Deck repair, underlayment grade and ventilation may or may not be in the price.
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
Get an apples-to-apples bid
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
- Specify tear-off vs. overlay so all bids match.
- Ask how deck/sheathing repairs are priced if rot is found.
- Compare the workmanship warranty, not just the material warranty.
Questions to ask Murray Roofing pros
You can't judge bids side by side unless they cover the same ground; run through these with every pro on your list.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Tile Roof Installation in Murray
How much does tile roof installation cost in Murray, UT?
Budgeting for tile roof installation? In Murray, 2026 prices land between $10,550 and $24,800, and about $17,700 is the typical outcome. We localize this using Murray's labor rates, cold-climate adjustments and permit fees — no separate math needed.
Is tile roof installation more expensive in Murray than average?
Because local labor indexes at 0.98 relative to the US average, Murray settles in about the same as the national average., before the Roofing permit, which runs about $275.
Do I need a permit for tile roof installation in Murray?
Budget about $275 for the Roofing permit most Murray jobs like this require — and note it already sits inside the estimate above, not on top of it.
What affects tile roof installation cost the most?
Installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates. Price swings mostly come down to equipment or material grade, the size and complexity of the home, local labor, and the cold climate zone.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national tile roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Murray using the BLS metro wage data labor index (×0.98 here), the IECC cold-climate factor (×1) and a typical local permit fee (≈$275). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Murray tile roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Tile roof installation alternatives in Murray
Homeowners in Murray often pair this with
A tile roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Murray
Browse local 2026 costs for every home project in Murray, UT.