Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Metal Roof Installation cost: Pasco vs Vancouver (2026)

In 2026, metal roof installation is about 5% less expensive in Pasco than in Vancouver. Most homeowners pay around $22,300 in Pasco versus $23,400 in Vancouver — a gap of roughly $1,100.

Pasco WA

Lower cost
$13,600 $31,000

Typically around $22,300

Vancouver WA

$14,250 $32,500

Typically around $23,400

The $1,100 (5%) premium on metal roof installation in Vancouver versus Pasco comes down mostly to local labor rates.
Side by side

Pasco vs Vancouver: full breakdown

FactorPascoVancouver
Typical 2026 cost$22,300$23,400
Estimated range$13,600–$31,000$14,250–$32,500
Labor index (vs US)×1.02×1.07
Climate zoneMixedMixed
Climate factor×1×1
Local permit$300$300
Labor share$13,400$14,050
Materials/equipment$8,900$9,350

Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.

The verdict

Is the price difference a dealbreaker?

5% is within noise for metal roof installation — contractor selection and timing move the price more than which of these two metros you're in.

By type

Metal roof installation by type: Pasco vs Vancouver

Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.

TypePascoVancouver
Corrugated steel (exposed fastener)$9,500$18,750$9,950$19,600
Standing-seam steel$18,750$36,150$19,600$37,850
Aluminum$14,650$28,950$15,300$30,350
Copper$31,000$61,750$32,500$64,700
Zinc$28,950$56,600$30,350$59,350

These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.

By size

Metal roof installation by roof size: Pasco vs Vancouver

Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.

SizePascoVancouver
1,000 sq ft (10 squares)$8,500$16,700$8,900$17,450
1,500 sq ft (15 squares)$11,550$23,850$12,100$25,000
2,000 sq ft (20 squares)$13,600$31,000$14,250$32,500
2,500 sq ft (25 squares)$16,700$37,150$17,450$38,950
3,000+ sq ft (30 squares)$19,750$43,300$20,700$45,350

Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.

Local labor reality

What roofing pros earn in each metro

Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.

Pasco, WA
Modeled from state data

No BLS metro wage series for Pasco; we use Washington regional price parity instead.

Vancouver, WA
$34.9/hr

Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.

Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).

Best time to buy

Cheapest time for metal roof installation in either city

The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.

The risk case

Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.

The do-it-right case

Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.

The value case

Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.

Our take

Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.

FAQ

Pasco vs Vancouver

Is metal roof installation cheaper in Pasco or Vancouver?

Pasco wins on price: metal roof installation runs about $22,300 there versus $23,400 in Vancouver, a gap of roughly $1,100 (5%) as of 2026.

Why does metal roof installation cost more in Vancouver than Pasco?

Vancouver's higher labor index (1.07 vs 1.02 in Pasco) is the biggest factor, with the mixed/mixed climate split playing a smaller role.

How much is metal roof installation in Pasco, WA?

In Pasco, metal roof installation typically runs $13,600–$31,000 in 2026, with most homeowners paying around $22,300.

When is the cheapest time to buy metal roof installation — and does it differ by city?

It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Pasco and Vancouver (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.

Should I choose where to live based on metal roof installation cost?

That would be a stretch. $1,100 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Vancouver can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.

Keep comparing

Compare metal roof installation in other cities

Updated June 2026 · By Serhat Özçelik