Metal Roof Installation cost: Pasco vs Seattle (2026)
In 2026, metal roof installation is about 16% less expensive in Pasco than in Seattle. Most homeowners pay around $22,300 in Pasco versus $25,950 in Seattle — a gap of roughly $3,650.
Pasco WA
Lower costTypically around $22,300
Seattle WA
Typically around $25,950
Pasco vs Seattle: full breakdown
| Factor | Pasco | Seattle |
|---|---|---|
| Typical 2026 cost | $22,300 | $25,950 |
| Estimated range | $13,600–$31,000 | $15,800–$36,050 |
| Labor index (vs US) | ×1.02 | ×1.19 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $325 |
| Labor share | $13,400 | $15,550 |
| Materials/equipment | $8,900 | $10,400 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Is the gap worth worrying about?
A 16% spread (roughly $3,650) is significant enough to plan around, but not fixed — off-peak timing and sharper bidding in Seattle typically recover some of it.
Metal roof installation by type: Pasco vs Seattle
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Pasco | Seattle |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,500–$18,750 | $11,050–$21,750 |
| Standing-seam steel | $18,750–$36,150 | $21,750–$42,000 |
| Aluminum | $14,650–$28,950 | $17,000–$33,700 |
| Copper | $31,000–$61,750 | $36,050–$71,800 |
| Zinc | $28,950–$56,600 | $33,700–$65,850 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Pasco vs Seattle
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Pasco | Seattle |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,500–$16,700 | $9,850–$19,400 |
| 1,500 sq ft (15 squares) | $11,550–$23,850 | $13,450–$27,750 |
| 2,000 sq ft (20 squares) | $13,600–$31,000 | $15,800–$36,050 |
| 2,500 sq ft (25 squares) | $16,700–$37,150 | $19,400–$43,200 |
| 3,000+ sq ft (30 squares) | $19,750–$43,300 | $22,950–$50,350 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
No BLS metro wage series for Pasco; we use Washington regional price parity instead.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Pasco vs Seattle
Is metal roof installation cheaper in Pasco or Seattle?
Pasco comes out ahead here, at roughly $22,300 for metal roof installation compared with $25,950 in Seattle — a 16% ($3,650) gap as of 2026.
Why does metal roof installation cost more in Seattle than Pasco?
Seattle's higher labor index (1.19 vs 1.02 in Pasco) is the biggest factor, with the mixed/mixed climate split and permit fee differences playing a smaller role.
How much is metal roof installation in Pasco, WA?
In Pasco, metal roof installation typically runs $13,600–$31,000 in 2026, with most homeowners paying around $22,300.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Pasco and Seattle (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Not really — the $3,650 gap is one-time, and smart timing and tighter quotes in Seattle can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik