Metal Roof Installation cost: Pasco vs Tacoma (2026)
In 2026, metal roof installation is about 16% less expensive in Pasco than in Tacoma. Most homeowners pay around $22,300 in Pasco versus $25,950 in Tacoma — a gap of roughly $3,650.
Pasco WA
Lower costTypically around $22,300
Tacoma WA
Typically around $25,950
Pasco vs Tacoma: full breakdown
| Factor | Pasco | Tacoma |
|---|---|---|
| Typical 2026 cost | $22,300 | $25,950 |
| Estimated range | $13,600–$31,000 | $15,800–$36,050 |
| Labor index (vs US) | ×1.02 | ×1.19 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $325 |
| Labor share | $13,400 | $15,550 |
| Materials/equipment | $8,900 | $10,400 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Is the price difference a dealbreaker?
That's a real $3,650 difference (16%) on metal roof installation — worth factoring in, though off-season timing and a tighter quote in Tacoma can narrow it.
Metal roof installation by type: Pasco vs Tacoma
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Pasco | Tacoma |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,500–$18,750 | $11,050–$21,750 |
| Standing-seam steel | $18,750–$36,150 | $21,750–$42,000 |
| Aluminum | $14,650–$28,950 | $17,000–$33,700 |
| Copper | $31,000–$61,750 | $36,050–$71,800 |
| Zinc | $28,950–$56,600 | $33,700–$65,850 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Pasco vs Tacoma
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Pasco | Tacoma |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,500–$16,700 | $9,850–$19,400 |
| 1,500 sq ft (15 squares) | $11,550–$23,850 | $13,450–$27,750 |
| 2,000 sq ft (20 squares) | $13,600–$31,000 | $15,800–$36,050 |
| 2,500 sq ft (25 squares) | $16,700–$37,150 | $19,400–$43,200 |
| 3,000+ sq ft (30 squares) | $19,750–$43,300 | $22,950–$50,350 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
No BLS metro wage series for Pasco; we use Washington regional price parity instead.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Pasco vs Tacoma
Is metal roof installation cheaper in Pasco or Tacoma?
In 2026, metal roof installation is cheaper in Pasco at about $22,300, versus $25,950 in Tacoma — a difference of about $3,650 (16%).
Why does metal roof installation cost more in Tacoma than Pasco?
Labor rates explain most of it — 1.19 in Tacoma vs 1.02 in Pasco. A mixed climate versus mixed, along with differing permit costs, accounts for the rest.
How much is metal roof installation in Pasco, WA?
Pasco homeowners can expect $13,600 to $31,000 for metal roof installation in 2026, with $22,300 the typical number.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Pasco and Tacoma: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
Not really — the $3,650 gap is one-time, and smart timing and tighter quotes in Tacoma can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik