Metal Roof Installation cost: Bellevue vs Pasco (2026)
The two metros aren't quite in sync on metal roof installation: Bellevue sits 16% above Pasco, or roughly $25,950 versus $22,300 — about $3,650 apart.
Bellevue WA
Typically around $25,950
Pasco WA
Lower costTypically around $22,300
Bellevue vs Pasco: full breakdown
| Factor | Bellevue | Pasco |
|---|---|---|
| Typical 2026 cost | $25,950 | $22,300 |
| Estimated range | $15,800–$36,050 | $13,600–$31,000 |
| Labor index (vs US) | ×1.19 | ×1.02 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $300 |
| Labor share | $15,550 | $13,400 |
| Materials/equipment | $10,400 | $8,900 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Is the gap worth worrying about?
That's a real $3,650 difference (16%) on metal roof installation — worth factoring in, though off-season timing and a tighter quote in Bellevue can narrow it.
Metal roof installation by type: Bellevue vs Pasco
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Bellevue | Pasco |
|---|---|---|
| Corrugated steel (exposed fastener) | $11,050–$21,750 | $9,500–$18,750 |
| Standing-seam steel | $21,750–$42,000 | $18,750–$36,150 |
| Aluminum | $17,000–$33,700 | $14,650–$28,950 |
| Copper | $36,050–$71,800 | $31,000–$61,750 |
| Zinc | $33,700–$65,850 | $28,950–$56,600 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Bellevue vs Pasco
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Bellevue | Pasco |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,850–$19,400 | $8,500–$16,700 |
| 1,500 sq ft (15 squares) | $13,450–$27,750 | $11,550–$23,850 |
| 2,000 sq ft (20 squares) | $15,800–$36,050 | $13,600–$31,000 |
| 2,500 sq ft (25 squares) | $19,400–$43,200 | $16,700–$37,150 |
| 3,000+ sq ft (30 squares) | $22,950–$50,350 | $19,750–$43,300 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
No BLS metro wage series for Pasco; we use Washington regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Before you compare roofing bids, know that the biggest variables are hidden: whether the crew tears off or lays over, what grade of shingle goes down, and what the decking looks like once it's exposed. Each one can shift the total well past the advertised price.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Bellevue vs Pasco
Is metal roof installation cheaper in Bellevue or Pasco?
Yes — Bellevue costs more. Expect around $25,950 for metal roof installation there against $22,300 in Pasco, about $3,650 (16%) apart in 2026.
Why does metal roof installation cost more in Bellevue than Pasco?
The main driver is local labor rates: Bellevue's labor index is 1.19 versus 1.02 in Pasco. Climate zone (mixed vs mixed) and permit fees also shift the total.
How much is metal roof installation in Bellevue, WA?
metal roof installation in Bellevue runs $15,800–$36,050 as of 2026 — most jobs land near $25,950.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Bellevue and Pasco (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Rarely. The $3,650 difference is real but one-time, and you can often close most of it in Bellevue by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik