Metal Roof Installation cost: Hollywood vs San Francisco (2026)
Hollywood runs 10% lower than San Francisco for metal roof installation — expect around $23,800 in Hollywood against $26,150 in San Francisco, a difference of about $2,350.
Hollywood CA
Lower costTypically around $23,800
San Francisco CA
Typically around $26,150
Hollywood vs San Francisco: full breakdown
| Factor | Hollywood | San Francisco |
|---|---|---|
| Typical 2026 cost | $23,800 | $26,150 |
| Estimated range | $14,500–$33,050 | $15,950–$36,350 |
| Labor index (vs US) | ×1.09 | ×1.2 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $325 |
| Labor share | $14,300 | $15,700 |
| Materials/equipment | $9,500 | $10,450 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Is the price difference a dealbreaker?
A 10% gap is meaningful on a project this size — about $2,350. That's real money, but it's often within reach of off-season timing and a tighter apples-to-apples bid in San Francisco.
Metal roof installation by type: Hollywood vs San Francisco
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Hollywood | San Francisco |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,150–$19,950 | $11,150–$21,950 |
| Standing-seam steel | $19,950–$38,500 | $21,950–$42,400 |
| Aluminum | $15,600–$30,900 | $17,150–$33,950 |
| Copper | $33,050–$65,800 | $36,350–$72,400 |
| Zinc | $30,900–$60,350 | $33,950–$66,400 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Hollywood vs San Francisco
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Hollywood | San Francisco |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,050–$17,800 | $9,950–$19,550 |
| 1,500 sq ft (15 squares) | $12,350–$25,400 | $13,550–$27,950 |
| 2,000 sq ft (20 squares) | $14,500–$33,050 | $15,950–$36,350 |
| 2,500 sq ft (25 squares) | $17,800–$39,600 | $19,550–$43,600 |
| 3,000+ sq ft (30 squares) | $21,050–$46,150 | $23,150–$50,800 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Los Angeles-Long Beach-Anaheim metro · about 15% above the US average installer wage.
San Francisco-Oakland-Fremont metro · about 34% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Hollywood vs San Francisco
Is metal roof installation cheaper in Hollywood or San Francisco?
In 2026, metal roof installation is cheaper in Hollywood at about $23,800, versus $26,150 in San Francisco — a difference of about $2,350 (10%).
Why does metal roof installation cost more in San Francisco than Hollywood?
San Francisco's higher labor index (1.2 vs 1.09 in Hollywood) is the biggest factor, with the mixed/mixed climate split playing a smaller role.
How much is metal roof installation in Hollywood, CA?
Hollywood homeowners can expect $14,500 to $33,050 for metal roof installation in 2026, with $23,800 the typical number.
Do roofing pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $35.9/hr in Los Angeles-Long Beach-Anaheim compared with $41.6/hr in San Francisco-Oakland-Fremont (BLS OEWS). Labor is about 60% of a metal roof installation job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Hollywood and San Francisco (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $2,350 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in San Francisco can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik