Metal Roof Installation cost: Hollywood vs Los Angeles (2026)
There's essentially no price gap here: metal roof installation runs close to $23,800 in both Hollywood and Los Angeles in 2026.
Hollywood CA
Typically around $23,800
Los Angeles CA
Typically around $23,800
Hollywood vs Los Angeles: full breakdown
| Factor | Hollywood | Los Angeles |
|---|---|---|
| Typical 2026 cost | $23,800 | $23,800 |
| Estimated range | $14,500–$33,050 | $14,500–$33,050 |
| Labor index (vs US) | ×1.09 | ×1.09 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $325 |
| Labor share | $14,300 | $14,300 |
| Materials/equipment | $9,500 | $9,500 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
A wash — choose on quality, not city
Neither metro has a cost edge on metal roof installation — spend your decision-making energy on the contractor, not the location.
Metal roof installation by type: Hollywood vs Los Angeles
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Hollywood | Los Angeles |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,150–$19,950 | $10,150–$19,950 |
| Standing-seam steel | $19,950–$38,500 | $19,950–$38,500 |
| Aluminum | $15,600–$30,900 | $15,600–$30,900 |
| Copper | $33,050–$65,800 | $33,050–$65,800 |
| Zinc | $30,900–$60,350 | $30,900–$60,350 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Hollywood vs Los Angeles
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Hollywood | Los Angeles |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,050–$17,800 | $9,050–$17,800 |
| 1,500 sq ft (15 squares) | $12,350–$25,400 | $12,350–$25,400 |
| 2,000 sq ft (20 squares) | $14,500–$33,050 | $14,500–$33,050 |
| 2,500 sq ft (25 squares) | $17,800–$39,600 | $17,800–$39,600 |
| 3,000+ sq ft (30 squares) | $21,050–$46,150 | $21,050–$46,150 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Los Angeles-Long Beach-Anaheim metro · about 15% above the US average installer wage.
Los Angeles-Long Beach-Anaheim metro · about 15% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often unlocks off-season pricing.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Hollywood vs Los Angeles
Is metal roof installation cheaper in Hollywood or Los Angeles?
Not really — both cities land at almost the same number for metal roof installation, around $23,800 each.
Why does metal roof installation cost more in Los Angeles than Hollywood?
The main driver is local labor rates: Los Angeles's labor index is 1.09 versus 1.09 in Hollywood. Climate zone (mixed vs mixed) also shift the total.
How much is metal roof installation in Hollywood, CA?
metal roof installation in Hollywood runs $14,500–$33,050 as of 2026 — most jobs land near $23,800.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $35.9/hr in the Los Angeles-Long Beach-Anaheim area versus $35.9/hr around Los Angeles-Long Beach-Anaheim (BLS metro wage data). Since labor is roughly 60% of a metal roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Hollywood and Los Angeles: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
Cost shouldn't be the deciding factor between Hollywood and Los Angeles — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik