Metal Roof Installation cost: Hollywood vs San Diego (2026)
In 2026, metal roof installation is about 1% less expensive in Hollywood than in San Diego. Most homeowners pay around $23,800 in Hollywood versus $24,050 in San Diego — a gap of roughly $250.
Hollywood CA
Lower costTypically around $23,800
San Diego CA
Typically around $24,050
Hollywood vs San Diego: full breakdown
| Factor | Hollywood | San Diego |
|---|---|---|
| Typical 2026 cost | $23,800 | $24,050 |
| Estimated range | $14,500–$33,050 | $14,650–$33,450 |
| Labor index (vs US) | ×1.09 | ×1.1 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $325 | $325 |
| Labor share | $14,300 | $14,450 |
| Materials/equipment | $9,500 | $9,600 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Is the price difference a dealbreaker?
A 1% difference on metal roof installation is minor — you'll typically see a wider spread just from getting multiple quotes in the same city, so don't let location drive the decision.
Metal roof installation by type: Hollywood vs San Diego
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Hollywood | San Diego |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,150–$19,950 | $10,250–$20,200 |
| Standing-seam steel | $19,950–$38,500 | $20,200–$38,950 |
| Aluminum | $15,600–$30,900 | $15,800–$31,250 |
| Copper | $33,050–$65,800 | $33,450–$66,550 |
| Zinc | $30,900–$60,350 | $31,250–$61,050 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Hollywood vs San Diego
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Hollywood | San Diego |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,050–$17,800 | $9,150–$18,000 |
| 1,500 sq ft (15 squares) | $12,350–$25,400 | $12,450–$25,700 |
| 2,000 sq ft (20 squares) | $14,500–$33,050 | $14,650–$33,450 |
| 2,500 sq ft (25 squares) | $17,800–$39,600 | $18,000–$40,050 |
| 3,000+ sq ft (30 squares) | $21,050–$46,150 | $21,300–$46,700 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Los Angeles-Long Beach-Anaheim metro · about 15% above the US average installer wage.
San Diego-Chula Vista-Carlsbad metro · about 17% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Hollywood vs San Diego
Is metal roof installation cheaper in Hollywood or San Diego?
Yes — San Diego costs more. Expect around $24,050 for metal roof installation there against $23,800 in Hollywood, about $250 (1%) apart in 2026.
Why does metal roof installation cost more in San Diego than Hollywood?
The main driver is local labor rates: San Diego's labor index is 1.1 versus 1.09 in Hollywood. Climate zone (mixed vs mixed) also shift the total.
How much is metal roof installation in Hollywood, CA?
In Hollywood, metal roof installation typically runs $14,500–$33,050 in 2026, with most homeowners paying around $23,800.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $35.9/hr around Los Angeles-Long Beach-Anaheim versus $36.5/hr near San Diego-Chula Vista-Carlsbad. With labor making up about 60% of a metal roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Hollywood and San Diego: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Probably not. Yes, $250 is a real gap, but it's a one-time cost you can partly offset in San Diego with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik