Roofing · Hollywood, CA
How much does metal roof installation cost in Hollywood, CA? (2026)
In Hollywood, metal roof installation runs $14,500–$33,050, with most paying around $23,800 — about 11% above the national average. Installing a metal roof — higher upfront cost, long lifespan and strong durability.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $23,800
- Typical cost
- $23,800
- Labor vs US
- +13%
- Climate
- Mixed
- Local permit
- $325
Refine your estimate
Tune it to your home to narrow the metal roof installation range.
Key takeaways for Hollywood
- In Hollywood, metal roof installation runs $14,500–$33,050 — call it $23,800 for a typical job, about 11% above the national average.
- Local labor in Hollywood is +13% relative to the national average, which is what pushes this estimate away from the countrywide number.
- Budget about $325 for the local Roofing permit; it's already included above.
- Expect 40–70 years of service, so planning a replacement beats a full-price emergency call.
- Time it right and you can save 5–10%: the best window to book is Late spring to early fall (dry, 45–85°F).
What goes into the price in Hollywood
A typical Hollywood metal roof installation of $23,800 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Hollywood 2026 range |
|---|---|
| Materials & equipmentEquipment and supplies, which price out close to the national baseline. | $5,650 – $13,100 |
| Labor & installationLabor to remove the old system and install the new one — this is where your city's wage index shows up. | $8,525 – $19,625 |
| Permit & feesRoofing permit cost, adjusted to this city's rate. | $325 |
| Total installed cost | $14,500 – $33,050 |
Split from the Hollywood estimate using a 60% local-labor share; line items sum to the total.
Why metal roof installation costs what it does in Hollywood
- Expect labor here to run 13% above the national norm (based on price levels for the Los Angeles-Long Beach-Anaheim metro area) — that's what raises the total.
- A Roofing permit in Hollywood costs around $325, included above.
Metal Roof Installation cost by roof size in Hollywood
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| roof size | Hollywood 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $9,050 – $17,800 |
| 1,500 sq ft (15 squares) | $12,350 – $25,400 |
| 2,000 sq ft (20 squares) | $14,500 – $33,050 |
| 2,500 sq ft (25 squares) | $17,800 – $39,600 |
| 3,000+ sq ft (30 squares) | $21,050 – $46,150 |
National size ranges localized to Hollywood labor and climate.
Metal Roof Installation cost by type in Hollywood
| Corrugated steel (exposed fastener) | $10,150 – $19,950 |
| Standing-seam steel | $19,950 – $38,500 |
| Aluminum | $15,600 – $30,850 |
| Copper | $33,050 – $65,750 |
| Zinc | $30,850 – $60,300 |
Adjusted to Hollywood from national type-level ranges.
Metal Roof Installation cost by efficiency in Hollywood
The panel system and metal type set the price. Exposed-fastener panels are the budget option; standing-seam hides the fasteners and lasts longer; specialty metals (copper, zinc) are architectural premiums.
| Exposed-fastener / corrugated steelLowest-cost metal; fasteners need periodic resealing | $9,050 – $19,950 |
| Standing-seam steel or aluminumHidden fasteners, sleek look; the mainstream choice | $14,500 – $33,050 |
| Copper / zinc (specialty)Premium architectural metal; 70+ yr life | $27,600 – $54,900 |
Labor vs. materials in Hollywood
Install crew, removal, permit & startup — the part Hollywood rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $23,800 Hollywood project; your mix varies with scope.
Skilled installers in the Los Angeles-Long Beach-Anaheim area earn about $35.9/hr (15% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your metal roof installation cost.
How we estimate it
| National range | $13,000 – $30,000 |
| Hollywood labor adjustment | ×1.09 |
| mixed climate factor | ×1 |
| Local permit | +$325 |
| Hollywood estimate | $14,500 – $33,050 |
Promo prices vs. the real cost
Roofing promotions spike after bad weather, and so does the gap between advertised and actual cost. Confirm scope first:
- Free roof inspection$0 — it's a sales visit
- Financing offers$0 down · low APR
- Per-square teaser priceadvertised low; varies by pitch & material
Additional metal roof installation costs to budget for
These aren't always in the headline price. Whether you'll pay them depends on your home's condition and setup.
| Tear-off & disposal of old roofSkippable if installing over a sound existing roof with furring | $1,000 – $3,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-temp synthetic) | $400 – $1,500 |
| Custom flashing, trim & ridge capsMore on complex or steep rooflines | $500 – $2,500 |
| Snow guards (in snowy regions) | $300 – $1,500 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Labor, cleanup and permit
- Metal panels or standing-seam system
- Underlayment, fasteners and trim
- Tear-off of the old roof
What affects the cost
- Panel type (exposed-fastener vs standing seam)
- Metal: steel, aluminum, copper or zinc
- Whether existing roof can be overlaid
- Roof complexity and number of penetrations
Ways to save on metal roof installation in Hollywood
- Steel standing seam balances cost and longevity
- Metal's 40–70 yr life lowers lifetime cost
- Compare lifetime cost, not just the install price
- Some insurers discount metal and impact-rated roofs
How long does metal roof installation last in Hollywood?
Steel/aluminum panels last 40–70 years; copper and zinc can exceed 100.
Mostly inspection — checking fasteners, sealant, and flashing; far less hands-on than asphalt.
Signs you need metal roof installation in Hollywood
- Loose, backed-out, or corroded fasteners on exposed-fastener panels
- Rust spots, especially at seams, edges, or scratches
- Failed sealant or lifted seams letting water track underneath
- Loose or damaged flashing around chimneys, valleys, and skylights
- Dents or panel deformation after hail or fallen limbs
- Faded or peeling factory finish near the end of its warranty
Repair or replace in Hollywood?
Repair if…
- The problem is loose fasteners, worn sealant, or a single damaged panel
- Rust is localized and can be treated and resealed
- Flashing has failed but the panels themselves are sound
Replace if…
- Corrosion or rust-through is widespread across panels
- Panels are heavily dented or deformed beyond repair
- The system is decades old and the protective coating has fully failed
Cost calculator
Roof cost by material in Hollywood, CA
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Hollywood, CA labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $7,650–$13,100 | $400/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $8,700–$17,450 | $500/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $19,600–$34,900 | $500/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $21,800–$43,600 | $500/yr |
Per-square ranges are national installed benchmarks localized to Hollywood, CA labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for metal roof installation in Hollywood
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Why metal roof installation quotes vary — and how to compare them fairly
Two bids for the “same” job can differ by thousands. Usually it's scope, not greed — here's what moves the number and how to get an apples-to-apples comparison.
Why a quote looks high (or low)
- Deck repair, underlayment grade and ventilation may or may not be in the price.
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
Get an apples-to-apples bid
- Ask how deck/sheathing repairs are priced if rot is found.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
- Specify tear-off vs. overlay so all bids match.
- Compare the workmanship warranty, not just the material warranty.
Questions to ask Hollywood Roofing pros
Comparing quotes is only fair when they cover the same scope. Ask every bidder these before you sign.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Metal Roof Installation in Hollywood
How much does metal roof installation cost in Hollywood, CA?
For Hollywood homeowners, metal roof installation typically falls between $14,500 and $33,050 in 2026, averaging close to $23,800. Local labor, the mixed climate and permit fees are all baked into that number.
Is metal roof installation more expensive in Hollywood than average?
Hollywood is about 11% higher than the national average, mainly because local labor runs at an index of 1.09 relative to the US average.; add in a Roofing permit at roughly $325.
Do I need a permit for metal roof installation in Hollywood?
A Roofing permit is standard in Hollywood for this kind of work, at roughly $325. You won't need to add it on top of the estimate above — it's already there.
What affects metal roof installation cost the most?
Installing a metal roof — higher upfront cost, long lifespan and strong durability. That's the baseline — the price moves from there. What moves the price most: equipment or material grade, your home's size and complexity, local labor rates, and the mixed climate zone.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national metal roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Hollywood using the BLS metro wage data labor index (×1.09 here), the IECC mixed-climate factor (×1) and a typical local permit fee (≈$325). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Hollywood metal roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Metal roof installation alternatives in Hollywood
Homeowners in Hollywood often pair this with
A metal roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Hollywood
Browse local 2026 costs for every home project in Hollywood, CA.