Metal Roof Installation cost: Fresno vs Hollywood (2026)
The two metros aren't quite in sync on metal roof installation: Fresno sits 5% below Hollywood, or roughly $22,700 versus $23,800 — about $1,100 apart.
Fresno CA
Lower costTypically around $22,700
Hollywood CA
Typically around $23,800
Fresno vs Hollywood: full breakdown
| Factor | Fresno | Hollywood |
|---|---|---|
| Typical 2026 cost | $22,700 | $23,800 |
| Estimated range | $13,850–$31,550 | $14,500–$33,050 |
| Labor index (vs US) | ×1.04 | ×1.09 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $325 |
| Labor share | $13,600 | $14,300 |
| Materials/equipment | $9,100 | $9,500 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
How much should this gap actually matter?
At 5%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for metal roof installation — focus on the contractor, not the city.
Metal roof installation by type: Fresno vs Hollywood
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Fresno | Hollywood |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,650–$19,050 | $10,150–$19,950 |
| Standing-seam steel | $19,050–$36,750 | $19,950–$38,500 |
| Aluminum | $14,900–$29,450 | $15,600–$30,900 |
| Copper | $31,550–$62,800 | $33,050–$65,800 |
| Zinc | $29,450–$57,600 | $30,900–$60,350 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Fresno vs Hollywood
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Fresno | Hollywood |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,650–$16,950 | $9,050–$17,800 |
| 1,500 sq ft (15 squares) | $11,750–$24,250 | $12,350–$25,400 |
| 2,000 sq ft (20 squares) | $13,850–$31,550 | $14,500–$33,050 |
| 2,500 sq ft (25 squares) | $16,950–$37,800 | $17,800–$39,600 |
| 3,000+ sq ft (30 squares) | $20,100–$44,050 | $21,050–$46,150 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Fresno metro · about 7% above the US average installer wage.
Los Angeles-Long Beach-Anaheim metro · about 15% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often unlocks off-season pricing.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Fresno vs Hollywood
Is metal roof installation cheaper in Fresno or Hollywood?
Fresno wins on price: metal roof installation runs about $22,700 there versus $23,800 in Hollywood, a gap of roughly $1,100 (5%) as of 2026.
Why does metal roof installation cost more in Hollywood than Fresno?
Labor rates explain most of it — 1.09 in Hollywood vs 1.04 in Fresno. A mixed climate versus mixed, along with differing permit costs, accounts for the rest.
How much is metal roof installation in Fresno, CA?
metal roof installation in Fresno runs $13,850–$31,550 as of 2026 — most jobs land near $22,700.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $33.3/hr in the Fresno area and $35.9/hr in Los Angeles-Long Beach-Anaheim. Given labor is around 60% of a metal roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Fresno and Hollywood: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $1,100 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Hollywood can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik