Metal Roof Installation cost: Broomfield vs Lakewood (2026)
In 2026, metal roof installation is about 9% less expensive in Broomfield than in Lakewood. Most homeowners pay around $22,650 in Broomfield versus $24,650 in Lakewood — a gap of roughly $2,000.
Broomfield CO
Lower costTypically around $22,650
Lakewood CO
Typically around $24,650
Broomfield vs Lakewood: full breakdown
| Factor | Broomfield | Lakewood |
|---|---|---|
| Typical 2026 cost | $22,650 | $24,650 |
| Estimated range | $13,800–$31,500 | $15,000–$34,250 |
| Labor index (vs US) | ×1 | ×1.09 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $275 | $300 |
| Labor share | $13,600 | $14,800 |
| Materials/equipment | $9,050 | $9,850 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Is the price difference a dealbreaker?
A 9% gap is meaningful on a project this size — about $2,000. That's real money, but it's often within reach of off-season timing and a tighter apples-to-apples bid in Lakewood.
Metal roof installation by type: Broomfield vs Lakewood
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Broomfield | Lakewood |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,650–$19,000 | $10,500–$20,650 |
| Standing-seam steel | $19,000–$36,700 | $20,650–$39,900 |
| Aluminum | $14,850–$29,400 | $16,150–$32,000 |
| Copper | $31,500–$62,700 | $34,250–$68,200 |
| Zinc | $29,400–$57,500 | $32,000–$62,550 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Broomfield vs Lakewood
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Broomfield | Lakewood |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,600–$16,900 | $9,350–$18,400 |
| 1,500 sq ft (15 squares) | $11,700–$24,200 | $12,750–$26,350 |
| 2,000 sq ft (20 squares) | $13,800–$31,500 | $15,000–$34,250 |
| 2,500 sq ft (25 squares) | $16,900–$37,700 | $18,400–$41,050 |
| 3,000+ sq ft (30 squares) | $20,050–$43,950 | $21,800–$47,850 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
No BLS metro wage series for Broomfield; we use Colorado regional price parity instead.
Denver-Aurora-Centennial metro · about 15% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Broomfield vs Lakewood
Is metal roof installation cheaper in Broomfield or Lakewood?
Yes — Lakewood costs more. Expect around $24,650 for metal roof installation there against $22,650 in Broomfield, about $2,000 (9%) apart in 2026.
Why does metal roof installation cost more in Lakewood than Broomfield?
It comes down to labor: Lakewood indexes at 1.09 against Broomfield's 1. The cold-vs-cold climate difference, plus permit fees, adds to the gap.
How much is metal roof installation in Broomfield, CO?
Expect to pay $13,800 to $31,500 for metal roof installation in Broomfield in 2026, averaging around $22,650.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Broomfield and Lakewood: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Rarely. The $2,000 difference is real but one-time, and you can often close most of it in Lakewood by buying in the off-season and getting tighter, apples-to-apples bids. Ongoing factors — energy prices, climate and home condition — matter more over the life of the system.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik