Roofing · Lakewood, CO
How much does metal roof installation cost in Lakewood, CO? (2026)
In Lakewood, metal roof installation runs $15,000–$34,250, with most paying around $24,650 — about 15% above the national average. Installing a metal roof — higher upfront cost, long lifespan and strong durability.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $24,650
- Typical cost
- $24,650
- Labor vs US
- +7%
- Climate
- Cold
- Local permit
- $300
Refine your estimate
Tune it to your home to narrow the metal roof installation range.
Key takeaways for Lakewood
- Expect $15,000 to $34,250 for metal roof installation in Lakewood; most quotes cluster near $24,650, about 15% above the national average.
- Lakewood labor runs +7% versus the US average — the main reason the local price differs from the national figure.
- Around $300 of the range above goes to the local Roofing permit, not an extra line item.
- Schedule the replacement early — this typically holds up 40–70 years, and an emergency swap costs full price.
- Late spring to early fall (dry, 45–85°F) is the low-price window — about 5–10% under peak rates.
What goes into the price in Lakewood
A typical Lakewood metal roof installation of $24,650 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Lakewood 2026 range |
|---|---|
| Materials & equipmentUnit, materials and supplies — priced close to the national level. | $5,900 – $13,600 |
| Labor & installationCrew time for removal, installation and startup; local labor rates drive most of the swing here. | $8,800 – $20,350 |
| Permit & feesThe Roofing permit fee for this metro, based on local rates. | $300 |
| Total installed cost | $15,000 – $34,250 |
Split from the Lakewood estimate using a 60% local-labor share; line items sum to the total.
Why metal roof installation costs what it does in Lakewood
- Lakewood's labor rates sit about 7% higher than the national average (based on price levels for the Denver-Aurora-Centennial metro area), pushing the price up.
- Lakewood's cold climate increases typical metal roof installation cost by about 4% versus a neutral climate.
- Lakewood's Roofing permit runs roughly $300, which is already part of the number above.
Metal Roof Installation cost by roof size in Lakewood
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| roof size | Lakewood 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $9,350 – $18,400 |
| 1,500 sq ft (15 squares) | $12,750 – $26,350 |
| 2,000 sq ft (20 squares) | $15,000 – $34,250 |
| 2,500 sq ft (25 squares) | $18,400 – $41,050 |
| 3,000+ sq ft (30 squares) | $21,800 – $47,850 |
National size ranges localized to Lakewood labor and climate.
Metal Roof Installation cost by type in Lakewood
| Corrugated steel (exposed fastener) | $10,500 – $20,700 |
| Standing-seam steel | $20,700 – $40,000 |
| Aluminum | $16,150 – $32,050 |
| Copper | $34,300 – $68,300 |
| Zinc | $32,050 – $62,650 |
Adjusted to Lakewood from national type-level ranges.
Metal Roof Installation cost by efficiency in Lakewood
The panel system and metal type set the price. Exposed-fastener panels are the budget option; standing-seam hides the fasteners and lasts longer; specialty metals (copper, zinc) are architectural premiums.
| Exposed-fastener / corrugated steelLowest-cost metal; fasteners need periodic resealing | $9,350 – $20,650 |
| Standing-seam steel or aluminumHidden fasteners, sleek look; the mainstream choice | $15,000 – $34,250 |
| Copper / zinc (specialty)Premium architectural metal; 70+ yr life | $28,600 – $56,900 |
Labor vs. materials in Lakewood
Install crew, removal, permit & startup — the part Lakewood rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $24,650 Lakewood project; your mix varies with scope.
Skilled installers in the Denver-Aurora-Centennial area earn about $35.7/hr (15% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your metal roof installation cost.
How we estimate it
| National range | $13,000 – $30,000 |
| Lakewood labor adjustment | ×1.09 |
| cold climate factor | ×1.04 |
| Local permit | +$300 |
| Lakewood estimate | $15,000 – $34,250 |
Promo prices vs. the real cost
Roofing promotions spike after bad weather, and so does the gap between advertised and actual cost. Confirm scope first:
- Financing offers$0 down · low APR
- Free roof inspection$0 — it's a sales visit
- Per-square teaser priceadvertised low; varies by pitch & material
Additional metal roof installation costs to budget for
Only a handful of these will touch your total. Which ones depend on what's already in place and how the crew has to reach it.
| Tear-off & disposal of old roofSkippable if installing over a sound existing roof with furring | $1,000 – $3,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-temp synthetic) | $400 – $1,500 |
| Custom flashing, trim & ridge capsMore on complex or steep rooflines | $500 – $2,500 |
| Snow guards (in snowy regions) | $300 – $1,500 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Tear-off of the old roof
- Labor, cleanup and permit
- Underlayment, fasteners and trim
- Metal panels or standing-seam system
What affects the cost
- Panel type (exposed-fastener vs standing seam)
- Roof complexity and number of penetrations
- Whether existing roof can be overlaid
- Metal: steel, aluminum, copper or zinc
Ways to save on metal roof installation in Lakewood
- Some insurers discount metal and impact-rated roofs
- Compare lifetime cost, not just the install price
- Metal's 40–70 yr life lowers lifetime cost
- Steel standing seam balances cost and longevity
How long does metal roof installation last in Lakewood?
Steel/aluminum panels last 40–70 years; copper and zinc can exceed 100.
Mostly inspection — checking fasteners, sealant, and flashing; far less hands-on than asphalt.
Signs you need metal roof installation in Lakewood
- Loose, backed-out, or corroded fasteners on exposed-fastener panels
- Rust spots, especially at seams, edges, or scratches
- Failed sealant or lifted seams letting water track underneath
- Loose or damaged flashing around chimneys, valleys, and skylights
- Dents or panel deformation after hail or fallen limbs
- Faded or peeling factory finish near the end of its warranty
Repair or replace in Lakewood?
Repair if…
- The problem is loose fasteners, worn sealant, or a single damaged panel
- Rust is localized and can be treated and resealed
- Flashing has failed but the panels themselves are sound
Replace if…
- Corrosion or rust-through is widespread across panels
- Panels are heavily dented or deformed beyond repair
- The system is decades old and the protective coating has fully failed
Cost calculator
Roof cost by material in Lakewood, CO
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Lakewood, CO labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $7,650–$13,100 | $400/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $8,700–$17,450 | $500/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $19,600–$34,900 | $500/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $21,800–$43,600 | $500/yr |
Per-square ranges are national installed benchmarks localized to Lakewood, CO labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for metal roof installation in Lakewood
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Why metal roof installation quotes vary — and how to compare them fairly
One bid high, one low, same house? The variable is scope. Here's what pushes the figure up or down and how to get quotes you can actually compare.
Why a quote looks high (or low)
- Deck repair, underlayment grade and ventilation may or may not be in the price.
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
Get an apples-to-apples bid
- Verify the contractor is licensed, insured and local, with recent references.
- Compare the workmanship warranty, not just the material warranty.
- Specify tear-off vs. overlay so all bids match.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
Questions to ask Lakewood Roofing pros
You can't judge bids side by side unless they cover the same ground; run through these with every pro on your list.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Metal Roof Installation in Lakewood
How much does metal roof installation cost in Lakewood, CO?
Expect to pay $15,000 to $34,250 for metal roof installation in Lakewood in 2026 — most quotes cluster around $24,650. That's not a national average — it's adjusted for Lakewood labor rates, cold-climate factors and permit fees.
Is metal roof installation more expensive in Lakewood than average?
Put Lakewood next to the national picture and it lands about 15% higher than the national average; the labor index of 1.09 explains the bulk of it. and the local Roofing permit costs about $300.
Do I need a permit for metal roof installation in Lakewood?
Most Lakewood jurisdictions require a Roofing permit for this work. Budget roughly $300 for the permit; it is already included in the estimate above.
What affects metal roof installation cost the most?
Here's the short version: installing a metal roof — higher upfront cost, long lifespan and strong durability. Your cold climate zone plays a part, but equipment/material grade, the size and complexity of the home, and local labor rates weigh in just as heavily.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national metal roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Lakewood using the BLS metro wage data labor index (×1.09 here), the IECC cold-climate factor (×1.04) and a typical local permit fee (≈$300). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Lakewood metal roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Metal roof installation alternatives in Lakewood
Homeowners in Lakewood often pair this with
A metal roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Lakewood
Browse local 2026 costs for every home project in Lakewood, CO.