Metal Roof Installation cost: Aurora vs Broomfield (2026)
Budget-wise, metal roof installation in Aurora ($24,650) runs 9% more than in Broomfield ($22,650), a roughly $2,000 spread.
Aurora CO
Typically around $24,650
Broomfield CO
Lower costTypically around $22,650
Aurora vs Broomfield: full breakdown
| Factor | Aurora | Broomfield |
|---|---|---|
| Typical 2026 cost | $24,650 | $22,650 |
| Estimated range | $15,000–$34,250 | $13,800–$31,500 |
| Labor index (vs US) | ×1.09 | ×1 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $300 | $275 |
| Labor share | $14,800 | $13,600 |
| Materials/equipment | $9,850 | $9,050 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Is the gap worth worrying about?
9% (about $2,000) is enough to notice on a metal roof installation budget. Timing the purchase for the off-season and pushing for an apples-to-apples bid in Aurora can close much of that gap.
Metal roof installation by type: Aurora vs Broomfield
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Aurora | Broomfield |
|---|---|---|
| Corrugated steel (exposed fastener) | $10,500–$20,650 | $9,650–$19,000 |
| Standing-seam steel | $20,650–$39,900 | $19,000–$36,700 |
| Aluminum | $16,150–$32,000 | $14,850–$29,400 |
| Copper | $34,250–$68,200 | $31,500–$62,700 |
| Zinc | $32,000–$62,550 | $29,400–$57,500 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Aurora vs Broomfield
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Aurora | Broomfield |
|---|---|---|
| 1,000 sq ft (10 squares) | $9,350–$18,400 | $8,600–$16,900 |
| 1,500 sq ft (15 squares) | $12,750–$26,350 | $11,700–$24,200 |
| 2,000 sq ft (20 squares) | $15,000–$34,250 | $13,800–$31,500 |
| 2,500 sq ft (25 squares) | $18,400–$41,050 | $16,900–$37,700 |
| 3,000+ sq ft (30 squares) | $21,800–$47,850 | $20,050–$43,950 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Denver-Aurora-Centennial metro · about 15% above the US average installer wage.
No BLS metro wage series for Broomfield; we use Colorado regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Aurora vs Broomfield
Is metal roof installation cheaper in Aurora or Broomfield?
In 2026, metal roof installation is cheaper in Broomfield at about $22,650, versus $24,650 in Aurora — a difference of about $2,000 (9%).
Why does metal roof installation cost more in Aurora than Broomfield?
Aurora's higher labor index (1.09 vs 1 in Broomfield) is the biggest factor, with the cold/cold climate split and permit fee differences playing a smaller role.
How much is metal roof installation in Aurora, CO?
In Aurora, metal roof installation typically runs $15,000–$34,250 in 2026, with most homeowners paying around $24,650.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Aurora and Broomfield: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $2,000 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Aurora can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik