Metal Roof Installation cost: Broomfield vs Denver (2026)
Budget-wise, metal roof installation in Broomfield ($22,650) runs 9% less than in Denver ($24,650), a roughly $2,000 spread.
Broomfield CO
Lower costTypically around $22,650
Denver CO
Typically around $24,650
Broomfield vs Denver: full breakdown
| Factor | Broomfield | Denver |
|---|---|---|
| Typical 2026 cost | $22,650 | $24,650 |
| Estimated range | $13,800–$31,500 | $15,000–$34,250 |
| Labor index (vs US) | ×1 | ×1.09 |
| Climate zone | Cold | Cold |
| Climate factor | ×1.04 | ×1.04 |
| Local permit | $275 | $300 |
| Labor share | $13,600 | $14,800 |
| Materials/equipment | $9,050 | $9,850 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Is the price difference a dealbreaker?
9% (about $2,000) is enough to notice on a metal roof installation budget. Timing the purchase for the off-season and pushing for an apples-to-apples bid in Denver can close much of that gap.
Metal roof installation by type: Broomfield vs Denver
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Broomfield | Denver |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,650–$19,000 | $10,500–$20,650 |
| Standing-seam steel | $19,000–$36,700 | $20,650–$39,900 |
| Aluminum | $14,850–$29,400 | $16,150–$32,000 |
| Copper | $31,500–$62,700 | $34,250–$68,200 |
| Zinc | $29,400–$57,500 | $32,000–$62,550 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Broomfield vs Denver
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Broomfield | Denver |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,600–$16,900 | $9,350–$18,400 |
| 1,500 sq ft (15 squares) | $11,700–$24,200 | $12,750–$26,350 |
| 2,000 sq ft (20 squares) | $13,800–$31,500 | $15,000–$34,250 |
| 2,500 sq ft (25 squares) | $16,900–$37,700 | $18,400–$41,050 |
| 3,000+ sq ft (30 squares) | $20,050–$43,950 | $21,800–$47,850 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
No BLS metro wage series for Broomfield; we use Colorado regional price parity instead.
Denver-Aurora-Centennial metro · about 15% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Broomfield vs Denver
Is metal roof installation cheaper in Broomfield or Denver?
Broomfield wins on price: metal roof installation runs about $22,650 there versus $24,650 in Denver, a gap of roughly $2,000 (9%) as of 2026.
Why does metal roof installation cost more in Denver than Broomfield?
Labor rates explain most of it — 1.09 in Denver vs 1 in Broomfield. A cold climate versus cold, along with differing permit costs, accounts for the rest.
How much is metal roof installation in Broomfield, CO?
Broomfield homeowners can expect $13,800 to $31,500 for metal roof installation in 2026, with $22,650 the typical number.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Broomfield and Denver (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Not really — the $2,000 gap is one-time, and smart timing and tighter quotes in Denver can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik