Roofing · Murray, UT
How much does metal roof installation cost in Murray, UT? (2026)
In Murray, metal roof installation runs $13,550–$30,900, with most paying around $22,250 — about 3% above the national average. Installing a metal roof — higher upfront cost, long lifespan and strong durability.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $22,250
- Typical cost
- $22,250
- Labor vs US
- −4%
- Climate
- Cold
- Local permit
- $275
Refine your estimate
Tune it to your home to narrow the metal roof installation range.
Key takeaways for Murray
- Expect $13,550 to $30,900 for metal roof installation in Murray; most quotes cluster near $22,250, about 3% above the national average.
- Local labor in Murray is −4% relative to the national average, which is what pushes this estimate away from the countrywide number.
- Budget about $275 for the local Roofing permit; it's already included above.
- Schedule the replacement early — this typically holds up 40–70 years, and an emergency swap costs full price.
- Skip peak pricing by scheduling in Late spring to early fall (dry, 45–85°F); the shift is worth about 5–10%.
What goes into the price in Murray
A typical Murray metal roof installation of $22,250 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Murray 2026 range |
|---|---|
| Materials & equipmentThe equipment and materials themselves — this part barely shifts by location. | $5,300 – $12,250 |
| Labor & installationRemoval, install and startup labor — the line most affected by where you live. | $7,975 – $18,375 |
| Permit & feesWhat this city's building department charges for a Roofing permit. | $275 |
| Total installed cost | $13,550 – $30,900 |
Split from the Murray estimate using a 60% local-labor share; line items sum to the total.
Why metal roof installation costs what it does in Murray
- Expect labor here to run 4% below the national norm (based on price levels for the Salt Lake City-Murray metro area) — that's what lowers the total.
- The cold climate in Murray adds roughly 4% to typical metal roof installation pricing versus a neutral climate.
- A Roofing permit in Murray costs around $275, included above.
Metal Roof Installation cost by roof size in Murray
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| roof size | Murray 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $8,450 – $16,600 |
| 1,500 sq ft (15 squares) | $11,500 – $23,750 |
| 2,000 sq ft (20 squares) | $13,550 – $30,900 |
| 2,500 sq ft (25 squares) | $16,600 – $37,000 |
| 3,000+ sq ft (30 squares) | $19,650 – $43,100 |
National size ranges localized to Murray labor and climate.
Metal Roof Installation cost by type in Murray
| Corrugated steel (exposed fastener) | $9,450 – $18,600 |
| Standing-seam steel | $18,600 – $35,950 |
| Aluminum | $14,550 – $28,800 |
| Copper | $30,850 – $61,450 |
| Zinc | $28,800 – $56,350 |
Adjusted to Murray from national type-level ranges.
Metal Roof Installation cost by efficiency in Murray
The panel system and metal type set the price. Exposed-fastener panels are the budget option; standing-seam hides the fasteners and lasts longer; specialty metals (copper, zinc) are architectural premiums.
| Exposed-fastener / corrugated steelLowest-cost metal; fasteners need periodic resealing | $8,450 – $18,650 |
| Standing-seam steel or aluminumHidden fasteners, sleek look; the mainstream choice | $13,550 – $30,900 |
| Copper / zinc (specialty)Premium architectural metal; 70+ yr life | $25,800 – $51,300 |
Labor vs. materials in Murray
Install crew, removal, permit & startup — the part Murray rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $22,250 Murray project; your mix varies with scope.
Skilled installers in the Salt Lake City-Murray area earn about $30.1/hr (3% below the US average, per BLS metro wage data) — the local wage is what moves the labor half of your metal roof installation cost.
How we estimate it
| National range | $13,000 – $30,000 |
| Murray labor adjustment | ×0.98 |
| cold climate factor | ×1.04 |
| Local permit | +$275 |
| Murray estimate | $13,550 – $30,900 |
Promo prices vs. the real cost
A headline roofing price means little without a defined scope — these are the numbers marketing tends to lean on:
- Financing offers$0 down · low APR
- Per-square teaser priceadvertised low; varies by pitch & material
- Free roof inspection$0 — it's a sales visit
Additional metal roof installation costs to budget for
Only a handful of these will touch your total. Which ones depend on what's already in place and how the crew has to reach it.
| Tear-off & disposal of old roofSkippable if installing over a sound existing roof with furring | $1,000 – $3,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-temp synthetic) | $400 – $1,500 |
| Custom flashing, trim & ridge capsMore on complex or steep rooflines | $500 – $2,500 |
| Snow guards (in snowy regions) | $300 – $1,500 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Metal panels or standing-seam system
- Underlayment, fasteners and trim
- Tear-off of the old roof
- Labor, cleanup and permit
What affects the cost
- Whether existing roof can be overlaid
- Roof complexity and number of penetrations
- Metal: steel, aluminum, copper or zinc
- Panel type (exposed-fastener vs standing seam)
Ways to save on metal roof installation in Murray
- Some insurers discount metal and impact-rated roofs
- Metal's 40–70 yr life lowers lifetime cost
- Steel standing seam balances cost and longevity
- Compare lifetime cost, not just the install price
How long does metal roof installation last in Murray?
Steel/aluminum panels last 40–70 years; copper and zinc can exceed 100.
Mostly inspection — checking fasteners, sealant, and flashing; far less hands-on than asphalt.
Signs you need metal roof installation in Murray
- Loose, backed-out, or corroded fasteners on exposed-fastener panels
- Rust spots, especially at seams, edges, or scratches
- Failed sealant or lifted seams letting water track underneath
- Loose or damaged flashing around chimneys, valleys, and skylights
- Dents or panel deformation after hail or fallen limbs
- Faded or peeling factory finish near the end of its warranty
Repair or replace in Murray?
Repair if…
- The problem is loose fasteners, worn sealant, or a single damaged panel
- Rust is localized and can be treated and resealed
- Flashing has failed but the panels themselves are sound
Replace if…
- Corrosion or rust-through is widespread across panels
- Panels are heavily dented or deformed beyond repair
- The system is decades old and the protective coating has fully failed
Cost calculator
Roof cost by material in Murray, UT
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Murray, UT labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $6,850–$11,750 | $350/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $7,850–$15,700 | $450/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $17,650–$31,350 | $450/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $19,600–$39,200 | $450/yr |
Per-square ranges are national installed benchmarks localized to Murray, UT labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for metal roof installation in Murray
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Why metal roof installation quotes vary — and how to compare them fairly
One bid high, one low, same house? The variable is scope. Here's what pushes the figure up or down and how to get quotes you can actually compare.
Why a quote looks high (or low)
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
Get an apples-to-apples bid
- Specify tear-off vs. overlay so all bids match.
- Verify the contractor is licensed, insured and local, with recent references.
- Compare the workmanship warranty, not just the material warranty.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
Questions to ask Murray Roofing pros
Level the field before you choose — ask each bidder the same questions and watch how the answers differ.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Metal Roof Installation in Murray
How much does metal roof installation cost in Murray, UT?
Budgeting for metal roof installation? In Murray, 2026 prices land between $13,550 and $30,900, and about $22,250 is the typical outcome. Murray labor rates, the cold climate and permit fees each shift the total, and all three already sit inside this range.
Is metal roof installation more expensive in Murray than average?
Compared with the rest of the country, Murray runs about 3% higher than the national average — local labor prices at an index of 0.98 against the US average. (a local Roofing permit tacks on about $275).
Do I need a permit for metal roof installation in Murray?
Yes — Murray typically requires a Roofing permit for this job, running about $275. That cost is already folded into the estimate above.
What affects metal roof installation cost the most?
In plain terms, installing a metal roof — higher upfront cost, long lifespan and strong durability. The biggest drivers are equipment/material grade, the size and complexity of your home, local labor rates, and your climate zone (cold).
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national metal roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Murray using the BLS metro wage data labor index (×0.98 here), the IECC cold-climate factor (×1.04) and a typical local permit fee (≈$275). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Murray metal roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Metal roof installation alternatives in Murray
Homeowners in Murray often pair this with
A metal roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Murray
Browse local 2026 costs for every home project in Murray, UT.