Roofing · St. George, UT
How much does metal roof installation cost in St. George, UT? (2026)
In St. George, metal roof installation runs $13,400–$30,550, with most paying around $22,000 — about 2% above the national average. Installing a metal roof — higher upfront cost, long lifespan and strong durability.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $22,000
- Typical cost
- $22,000
- Labor vs US
- −5%
- Climate
- Cold
- Local permit
- $275
Refine your estimate
Tune it to your home to narrow the metal roof installation range.
Key takeaways for St. George
- Most St. George homeowners land around $22,000 for metal roof installation, within a $13,400–$30,550 range that sits about 2% above the national average.
- This estimate departs from the national number mainly because St. George labor sits −5% versus the US average.
- The estimate already covers the Roofing permit — roughly $275 in St. George.
- Expect 40–70 years of service, so planning a replacement beats a full-price emergency call.
- Booking during Late spring to early fall (dry, 45–85°F) typically saves about 5–10% versus peak-season pricing.
What goes into the price in St. George
A typical St. George metal roof installation of $22,000 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | St. George 2026 range |
|---|---|
| Materials & equipmentThe equipment and materials themselves — this part barely shifts by location. | $5,250 – $12,100 |
| Labor & installationRemoval, install and startup labor — the line most affected by where you live. | $7,875 – $18,175 |
| Permit & feesWhat this city's building department charges for a Roofing permit. | $275 |
| Total installed cost | $13,400 – $30,550 |
Split from the St. George estimate using a 60% local-labor share; line items sum to the total.
Why metal roof installation costs what it does in St. George
- Expect labor here to run 5% below the national norm (based on price levels for the St. George metro area) — that's what lowers the total.
- Because St. George sits in a cold climate zone, metal roof installation costs run about 4% higher than a neutral-climate baseline.
- A Roofing permit in St. George costs around $275, included above.
Metal Roof Installation cost by roof size in St. George
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| roof size | St. George 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $8,350 – $16,400 |
| 1,500 sq ft (15 squares) | $11,350 – $23,500 |
| 2,000 sq ft (20 squares) | $13,400 – $30,550 |
| 2,500 sq ft (25 squares) | $16,400 – $36,600 |
| 3,000+ sq ft (30 squares) | $19,450 – $42,650 |
National size ranges localized to St. George labor and climate.
Metal Roof Installation cost by type in St. George
| Corrugated steel (exposed fastener) | $9,350 – $18,450 |
| Standing-seam steel | $18,450 – $35,600 |
| Aluminum | $14,400 – $28,500 |
| Copper | $30,550 – $60,800 |
| Zinc | $28,500 – $55,750 |
Adjusted to St. George from national type-level ranges.
Metal Roof Installation cost by efficiency in St. George
The panel system and metal type set the price. Exposed-fastener panels are the budget option; standing-seam hides the fasteners and lasts longer; specialty metals (copper, zinc) are architectural premiums.
| Exposed-fastener / corrugated steelLowest-cost metal; fasteners need periodic resealing | $8,350 – $18,450 |
| Standing-seam steel or aluminumHidden fasteners, sleek look; the mainstream choice | $13,400 – $30,550 |
| Copper / zinc (specialty)Premium architectural metal; 70+ yr life | $25,500 – $50,700 |
Labor vs. materials in St. George
Install crew, removal, permit & startup — the part St. George rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $22,000 St. George project; your mix varies with scope.
How we estimate it
| National range | $13,000 – $30,000 |
| St. George labor adjustment | ×0.97 |
| cold climate factor | ×1.04 |
| Local permit | +$275 |
| St. George estimate | $13,400 – $30,550 |
Promo prices vs. the real cost
A low per-square roofing number in an ad means little until you know what scope it covers. Set these marketing figures against the real estimate above:
- Financing offers$0 down · low APR
- Per-square teaser priceadvertised low; varies by pitch & material
- Free roof inspection$0 — it's a sales visit
Additional metal roof installation costs to budget for
Expect a few of these rather than all. Which ones apply tracks with access, hidden damage and local code.
| Tear-off & disposal of old roofSkippable if installing over a sound existing roof with furring | $1,000 – $3,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-temp synthetic) | $400 – $1,500 |
| Custom flashing, trim & ridge capsMore on complex or steep rooflines | $500 – $2,500 |
| Snow guards (in snowy regions) | $300 – $1,500 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Metal panels or standing-seam system
- Underlayment, fasteners and trim
- Labor, cleanup and permit
- Tear-off of the old roof
What affects the cost
- Whether existing roof can be overlaid
- Panel type (exposed-fastener vs standing seam)
- Metal: steel, aluminum, copper or zinc
- Roof complexity and number of penetrations
Ways to save on metal roof installation in St. George
- Steel standing seam balances cost and longevity
- Metal's 40–70 yr life lowers lifetime cost
- Some insurers discount metal and impact-rated roofs
- Compare lifetime cost, not just the install price
How long does metal roof installation last in St. George?
Steel/aluminum panels last 40–70 years; copper and zinc can exceed 100.
Mostly inspection — checking fasteners, sealant, and flashing; far less hands-on than asphalt.
Signs you need metal roof installation in St. George
- Loose, backed-out, or corroded fasteners on exposed-fastener panels
- Rust spots, especially at seams, edges, or scratches
- Failed sealant or lifted seams letting water track underneath
- Loose or damaged flashing around chimneys, valleys, and skylights
- Dents or panel deformation after hail or fallen limbs
- Faded or peeling factory finish near the end of its warranty
Repair or replace in St. George?
Repair if…
- The problem is loose fasteners, worn sealant, or a single damaged panel
- Rust is localized and can be treated and resealed
- Flashing has failed but the panels themselves are sound
Replace if…
- Corrosion or rust-through is widespread across panels
- Panels are heavily dented or deformed beyond repair
- The system is decades old and the protective coating has fully failed
Cost calculator
Roof cost by material in St. George, UT
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to St. George, UT labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $6,800–$11,650 | $350/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $7,750–$15,500 | $450/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $17,450–$31,050 | $450/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $19,400–$38,800 | $450/yr |
Per-square ranges are national installed benchmarks localized to St. George, UT labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for metal roof installation in St. George
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Why metal roof installation quotes vary — and how to compare them fairly
One bid high, one low, same house? The variable is scope. Here's what pushes the figure up or down and how to get quotes you can actually compare.
Why a quote looks high (or low)
- Deck repair, underlayment grade and ventilation may or may not be in the price.
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
Get an apples-to-apples bid
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
- Verify the contractor is licensed, insured and local, with recent references.
- Compare the workmanship warranty, not just the material warranty.
- Specify tear-off vs. overlay so all bids match.
Questions to ask St. George Roofing pros
A fair comparison starts with identical questions. Ask each contractor the following before anything gets signed.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Metal Roof Installation in St. George
How much does metal roof installation cost in St. George, UT?
In St. George, metal roof installation typically costs $13,400 to $30,550 in 2026, with most homeowners paying around $22,000. That range already accounts for St. George's labor rates, its cold climate and local permit costs.
Is metal roof installation more expensive in St. George than average?
Why the gap? St. George prices about 2% higher than the national average, and local labor — indexed at 0.97 against the US average — does most of the work. (a local Roofing permit tacks on about $275).
Do I need a permit for metal roof installation in St. George?
A Roofing permit is standard in St. George for this kind of work, at roughly $275. You won't need to add it on top of the estimate above — it's already there.
What affects metal roof installation cost the most?
Installing a metal roof — higher upfront cost, long lifespan and strong durability. Price swings mostly come down to equipment or material grade, the size and complexity of the home, local labor, and the cold climate zone.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national metal roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to St. George using the BEA Regional Price Parity labor index (×0.97 here), the IECC cold-climate factor (×1.04) and a typical local permit fee (≈$275). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our St. George metal roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Metal roof installation alternatives in St. George
Homeowners in St. George often pair this with
A metal roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in St. George
Browse local 2026 costs for every home project in St. George, UT.