Roofing · Collierville, TN
How much does metal roof installation cost in Collierville, TN? (2026)
In Collierville, metal roof installation runs $12,700–$29,000, with most paying around $20,850 — about 3% below the national average. Installing a metal roof — higher upfront cost, long lifespan and strong durability.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $20,850
- Typical cost
- $20,850
- Labor vs US
- −8%
- Climate
- Mixed
- Local permit
- $250
Refine your estimate
Tune it to your home to narrow the metal roof installation range.
Key takeaways for Collierville
- A metal roof installation in Collierville typically runs $12,700–$29,000, with most homeowners paying about $20,850 — about 3% below the national average.
- The −8% gap between Collierville and national labor rates is the single biggest reason this price isn't the national average.
- Budget about $250 for the local Roofing permit; it's already included above.
- Service life runs 40–70 years on average; replacing on your schedule beats replacing on an emergency one.
- Late spring to early fall (dry, 45–85°F) is the low-price window — about 5–10% under peak rates.
What goes into the price in Collierville
A typical Collierville metal roof installation of $20,850 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Collierville 2026 range |
|---|---|
| Materials & equipmentThe unit and materials — largely the same cost no matter which city you're in. | $5,000 – $11,500 |
| Labor & installationInstall crew, removal and startup — the part local rates move most. | $7,450 – $17,250 |
| Permit & feesLocal building-department fee for Roofing work here. | $250 |
| Total installed cost | $12,700 – $29,000 |
Split from the Collierville estimate using a 60% local-labor share; line items sum to the total.
Why metal roof installation costs what it does in Collierville
- Collierville's labor rates sit about 8% lower than the national average (based on price levels for the Memphis metro area), pushing the price down.
- Budget about $250 for the local Roofing permit in Collierville — already folded into the estimate above.
Metal Roof Installation cost by roof size in Collierville
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| roof size | Collierville 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $7,900 – $15,600 |
| 1,500 sq ft (15 squares) | $10,800 – $22,300 |
| 2,000 sq ft (20 squares) | $12,700 – $29,000 |
| 2,500 sq ft (25 squares) | $15,600 – $34,750 |
| 3,000+ sq ft (30 squares) | $18,450 – $40,500 |
National size ranges localized to Collierville labor and climate.
Metal Roof Installation cost by type in Collierville
| Corrugated steel (exposed fastener) | $8,900 – $17,550 |
| Standing-seam steel | $17,550 – $33,850 |
| Aluminum | $13,700 – $27,150 |
| Copper | $29,050 – $57,850 |
| Zinc | $27,150 – $53,050 |
Adjusted to Collierville from national type-level ranges.
Metal Roof Installation cost by efficiency in Collierville
The panel system and metal type set the price. Exposed-fastener panels are the budget option; standing-seam hides the fasteners and lasts longer; specialty metals (copper, zinc) are architectural premiums.
| Exposed-fastener / corrugated steelLowest-cost metal; fasteners need periodic resealing | $7,900 – $17,500 |
| Standing-seam steel or aluminumHidden fasteners, sleek look; the mainstream choice | $12,700 – $29,000 |
| Copper / zinc (specialty)Premium architectural metal; 70+ yr life | $24,200 – $48,200 |
Labor vs. materials in Collierville
Install crew, removal, permit & startup — the part Collierville rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $20,850 Collierville project; your mix varies with scope.
Skilled installers in the Memphis area earn about $29/hr (7% below the US average, per BLS metro wage data) — the local wage is what moves the labor half of your metal roof installation cost.
How we estimate it
| National range | $13,000 – $30,000 |
| Collierville labor adjustment | ×0.96 |
| mixed climate factor | ×1 |
| Local permit | +$250 |
| Collierville estimate | $12,700 – $29,000 |
Promo prices vs. the real cost
A low per-square roofing number in an ad means little until you know what scope it covers. Set these marketing figures against the real estimate above:
- Free roof inspection$0 — it's a sales visit
- Per-square teaser priceadvertised low; varies by pitch & material
- Financing offers$0 down · low APR
Additional metal roof installation costs to budget for
Treat them as possibilities, not certainties — the ones that reach your quote follow your property's age and setup.
| Tear-off & disposal of old roofSkippable if installing over a sound existing roof with furring | $1,000 – $3,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-temp synthetic) | $400 – $1,500 |
| Custom flashing, trim & ridge capsMore on complex or steep rooflines | $500 – $2,500 |
| Snow guards (in snowy regions) | $300 – $1,500 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Underlayment, fasteners and trim
- Labor, cleanup and permit
- Metal panels or standing-seam system
- Tear-off of the old roof
What affects the cost
- Metal: steel, aluminum, copper or zinc
- Whether existing roof can be overlaid
- Panel type (exposed-fastener vs standing seam)
- Roof complexity and number of penetrations
Ways to save on metal roof installation in Collierville
- Compare lifetime cost, not just the install price
- Steel standing seam balances cost and longevity
- Some insurers discount metal and impact-rated roofs
- Metal's 40–70 yr life lowers lifetime cost
How long does metal roof installation last in Collierville?
Steel/aluminum panels last 40–70 years; copper and zinc can exceed 100.
Mostly inspection — checking fasteners, sealant, and flashing; far less hands-on than asphalt.
Signs you need metal roof installation in Collierville
- Loose, backed-out, or corroded fasteners on exposed-fastener panels
- Rust spots, especially at seams, edges, or scratches
- Failed sealant or lifted seams letting water track underneath
- Loose or damaged flashing around chimneys, valleys, and skylights
- Dents or panel deformation after hail or fallen limbs
- Faded or peeling factory finish near the end of its warranty
Repair or replace in Collierville?
Repair if…
- The problem is loose fasteners, worn sealant, or a single damaged panel
- Rust is localized and can be treated and resealed
- Flashing has failed but the panels themselves are sound
Replace if…
- Corrosion or rust-through is widespread across panels
- Panels are heavily dented or deformed beyond repair
- The system is decades old and the protective coating has fully failed
Cost calculator
Roof cost by material in Collierville, TN
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Collierville, TN labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $6,700–$11,500 | $350/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $7,700–$15,350 | $450/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $17,300–$30,700 | $450/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $19,200–$38,400 | $450/yr |
Per-square ranges are national installed benchmarks localized to Collierville, TN labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for metal roof installation in Collierville
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Why metal roof installation quotes vary — and how to compare them fairly
One bid high, one low, same house? The variable is scope. Here's what pushes the figure up or down and how to get quotes you can actually compare.
Why a quote looks high (or low)
- Deck repair, underlayment grade and ventilation may or may not be in the price.
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
Get an apples-to-apples bid
- Specify tear-off vs. overlay so all bids match.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
- Compare the workmanship warranty, not just the material warranty.
- Verify the contractor is licensed, insured and local, with recent references.
Questions to ask Collierville Roofing pros
A fair comparison starts with identical questions. Ask each contractor the following before anything gets signed.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Metal Roof Installation in Collierville
How much does metal roof installation cost in Collierville, TN?
For Collierville homeowners, metal roof installation typically falls between $12,700 and $29,000 in 2026, averaging close to $20,850. That's not a national average — it's adjusted for Collierville labor rates, mixed-climate factors and permit fees.
Is metal roof installation more expensive in Collierville than average?
Because local labor indexes at 0.96 relative to the US average, Collierville settles in about 3% lower than the national average. and the local Roofing permit costs about $250.
Do I need a permit for metal roof installation in Collierville?
In Collierville, this usually needs a Roofing permit (around $250). The estimate above already accounts for it.
What affects metal roof installation cost the most?
In plain terms, installing a metal roof — higher upfront cost, long lifespan and strong durability. What should you watch? Equipment or material grade, the home's size and complexity, local labor rates, and your mixed climate zone — in roughly that order.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
Three habits keep a roof from costing more than it should: strip to the deck, choose an architectural shingle, and get the decking-repair rate on paper before the tear-off begins. Storm season tends to produce the lowest bids and the shortest-lived roofs.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national metal roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Collierville using the BLS metro wage data labor index (×0.96 here), the IECC mixed-climate factor (×1) and a typical local permit fee (≈$250). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Collierville metal roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Metal roof installation alternatives in Collierville
Homeowners in Collierville often pair this with
A metal roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Collierville
Browse local 2026 costs for every home project in Collierville, TN.