Roofing · Collierville, TN
How much does flat roof replacement cost in Collierville, TN? (2026)
In Collierville, flat roof replacement runs $5,050–$14,650, with most paying around $9,850 — about 2% below the national average. Replacing a flat or low-slope roof using membrane systems such as TPO, EPDM or modified bitumen.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $9,850
- Typical cost
- $9,850
- Labor vs US
- −8%
- Climate
- Mixed
- Local permit
- $250
Refine your estimate
Tune it to your home to narrow the flat roof replacement range.
Key takeaways for Collierville
- Expect $5,050 to $14,650 for flat roof replacement in Collierville; most quotes cluster near $9,850, about 2% below the national average.
- Collierville labor runs −8% versus the US average — the main reason the local price differs from the national figure.
- The estimate already covers the Roofing permit — roughly $250 in Collierville.
- Expect 15–30 years of service, so planning a replacement beats a full-price emergency call.
- Roughly 5–10% comes off when you book in Late spring to early fall (dry, 45–85°F) instead of peak season.
What goes into the price in Collierville
A typical Collierville flat roof replacement of $9,850 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Collierville 2026 range |
|---|---|
| Materials & equipmentThe unit and materials — largely the same cost no matter which city you're in. | $1,900 – $5,750 |
| Labor & installationRemoval, install and startup labor — the line most affected by where you live. | $2,900 – $8,650 |
| Permit & feesWhat this city's building department charges for a Roofing permit. | $250 |
| Total installed cost | $5,050 – $14,650 |
Split from the Collierville estimate using a 60% local-labor share; line items sum to the total.
Why flat roof replacement costs what it does in Collierville
- Labor in Collierville runs about 8% below the national average (based on price levels for the Memphis metro area), which lowers the installed price.
- Budget about $250 for the local Roofing permit in Collierville — already folded into the estimate above.
Flat Roof Replacement cost by roof size in Collierville
Flat and low-slope roofs are priced per square (100 sq ft) and run about $3–$11 per sq ft installed, depending on the membrane. The roof area is close to the footprint since there's little pitch.
| roof size | Collierville 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $4,100 – $8,400 |
| 1,500 sq ft (15 squares) | $5,050 – $10,800 |
| 2,000 sq ft (20 squares) | $6,000 – $13,650 |
| 2,500 sq ft (25 squares) | $7,450 – $15,600 |
| 3,000+ sq ft (30 squares) | $8,900 – $18,450 |
National size ranges localized to Collierville labor and climate.
Flat Roof Replacement cost by type in Collierville
| EPDM (rubber) | $5,050 – $11,750 |
| TPO | $6,000 – $12,750 |
| PVC | $6,950 – $14,650 |
| Modified bitumen | $5,050 – $10,800 |
| Built-up roofing (BUR) | $6,500 – $13,700 |
Adjusted to Collierville from national type-level ranges.
Flat Roof Replacement cost by efficiency in Collierville
Flat roofs are defined by their membrane. EPDM (rubber) is the budget standard; TPO is the popular reflective 'cool roof' choice; PVC and modified bitumen suit grease or high-traffic settings.
| EPDM rubber membraneLowest-cost; durable black rubber; ~20–25 yr | $5,050 – $10,800 |
| TPO (reflective single-ply)Energy-saving white 'cool roof'; the mainstream pick | $6,000 – $12,700 |
| PVC / modified bitumenBest for chemical/grease exposure or layered systems | $6,950 – $14,650 |
Labor vs. materials in Collierville
Install crew, removal, permit & startup — the part Collierville rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $9,850 Collierville project; your mix varies with scope.
Skilled installers in the Memphis area earn about $29/hr (7% below the US average, per BLS metro wage data) — the local wage is what moves the labor half of your flat roof replacement cost.
How we estimate it
| National range | $5,000 – $15,000 |
| Collierville labor adjustment | ×0.96 |
| mixed climate factor | ×1 |
| Local permit | +$250 |
| Collierville estimate | $5,050 – $14,650 |
Promo prices vs. the real cost
Storm-season ads push low headline prices — confirm scope before you compare:
- Free roof inspection$0 — it's a sales visit
- Financing offers$0 down · low APR
- Per-square teaser priceadvertised low; varies by pitch & material
Additional flat roof replacement costs to budget for
Some of these land on the final invoice and some never surface — it comes down to your home's age, access and existing setup.
| Tear-off & disposal of old membrane | $1,000 – $3,000 |
| Decking / substrate repairFlat roofs trap water, so rot is common | $500 – $3,000 |
| New rigid insulation board (R-value) | $1,000 – $4,000 |
| Drains, scuppers & tapered slope correctionTo stop standing water (ponding) | $500 – $3,000 |
| Flashing & parapet wall detailing | $400 – $2,000 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Membrane material (TPO, EPDM or modified bitumen)
- Flashing, drains, labor and permit
- Tear-off of the old membrane
- Insulation board and fasteners/adhesive
What affects the cost
- Membrane type and thickness (mil)
- Insulation R-value added
- Parapet and edge-metal detailing
- Roof area and number of penetrations/drains
Ways to save on flat roof replacement in Collierville
- TPO offers a good cost-to-performance balance
- Address ponding/drainage to extend membrane life
- Add insulation now to cut energy bills
- Mechanically-fastened systems install faster
How long does flat roof replacement last in Collierville?
EPDM and TPO last ~20–25 years; PVC up to 30. Standing water shortens any flat-roof membrane.
Twice-yearly inspections to clear drains, reseal seams, and catch ponding before it causes leaks.
Signs you need flat roof replacement in Collierville
- Standing water (ponding) that lingers more than 48 hours after rain
- Blisters, bubbles, or splits in the membrane
- Seams or flashing lifting, cracking, or pulling apart
- Interior water stains, drips, or a sagging deck
- The membrane is brittle, cracked, or shrinking with age
- Repeated patch repairs that no longer hold
Repair or replace in Collierville?
Repair if…
- Leaks trace to isolated seams, flashing, or a single puncture
- The membrane is under ~15 years old and otherwise sound
- A reflective recoat can extend the existing membrane's life
Replace if…
- The membrane is brittle, blistered, or splitting across the roof
- Chronic ponding has saturated the insulation or decking
- The roof is past 20 years and leaking in multiple spots
Cost calculator
Roof cost by material in Collierville, TN
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Collierville, TN labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $6,700–$11,500 | $350/yr |
Flat / low-slope (TPO, EPDM)This page For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $7,700–$15,350 | $450/yr |
Standing-seam metal High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $17,300–$30,700 | $450/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $19,200–$38,400 | $450/yr |
Per-square ranges are national installed benchmarks localized to Collierville, TN labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for flat roof replacement in Collierville
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Why flat roof replacement quotes vary — and how to compare them fairly
One bid high, one low, same house? The variable is scope. Here's what pushes the figure up or down and how to get quotes you can actually compare.
Why a quote looks high (or low)
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
- Deck repair, underlayment grade and ventilation may or may not be in the price.
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
Get an apples-to-apples bid
- Verify the contractor is licensed, insured and local, with recent references.
- Compare the workmanship warranty, not just the material warranty.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
- Specify tear-off vs. overlay so all bids match.
Questions to ask Collierville Roofing pros
A fair comparison starts with identical questions. Ask each contractor the following before anything gets signed.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Flat Roof Replacement in Collierville
How much does flat roof replacement cost in Collierville, TN?
Expect to pay $5,050 to $14,650 for flat roof replacement in Collierville in 2026 — most quotes cluster around $9,850. That range already accounts for Collierville's labor rates, its mixed climate and local permit costs.
Is flat roof replacement more expensive in Collierville than average?
Because local labor indexes at 0.96 relative to the US average, Collierville settles in about 2% lower than the national average. — the local Roofing permit, about $250, is part of that too.
Do I need a permit for flat roof replacement in Collierville?
In Collierville, this usually needs a Roofing permit (around $250). The estimate above already accounts for it.
What affects flat roof replacement cost the most?
Start with the fundamentals — replacing a flat or low-slope roof using membrane systems such as TPO, EPDM or modified bitumen. Your mixed climate zone plays a part, but equipment/material grade, the size and complexity of the home, and local labor rates weigh in just as heavily.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national flat roof replacement ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Collierville using the BLS metro wage data labor index (×0.96 here), the IECC mixed-climate factor (×1) and a typical local permit fee (≈$250). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Collierville flat roof replacement estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Flat roof replacement alternatives in Collierville
Homeowners in Collierville often pair this with
A flat roof replacement rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Collierville
Browse local 2026 costs for every home project in Collierville, TN.