Metal Roof Installation cost: Collierville vs Memphis (2026)
In 2026, Collierville and Memphis land on nearly identical metal roof installation pricing — about $20,850 either way.
Collierville TN
Typically around $20,850
Memphis TN
Typically around $20,850
Collierville vs Memphis: full breakdown
| Factor | Collierville | Memphis |
|---|---|---|
| Typical 2026 cost | $20,850 | $20,850 |
| Estimated range | $12,700–$29,000 | $12,700–$29,000 |
| Labor index (vs US) | ×0.96 | ×0.96 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $12,500 | $12,500 |
| Materials/equipment | $8,350 | $8,350 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
A wash — choose on quality, not city
Neither metro has a cost edge on metal roof installation — spend your decision-making energy on the contractor, not the location.
Metal roof installation by type: Collierville vs Memphis
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Collierville | Memphis |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,900–$17,500 | $8,900–$17,500 |
| Standing-seam steel | $17,500–$33,800 | $17,500–$33,800 |
| Aluminum | $13,650–$27,100 | $13,650–$27,100 |
| Copper | $29,000–$57,750 | $29,000–$57,750 |
| Zinc | $27,100–$52,950 | $27,100–$52,950 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Collierville vs Memphis
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Collierville | Memphis |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,900–$15,600 | $7,900–$15,600 |
| 1,500 sq ft (15 squares) | $10,800–$22,300 | $10,800–$22,300 |
| 2,000 sq ft (20 squares) | $12,700–$29,000 | $12,700–$29,000 |
| 2,500 sq ft (25 squares) | $15,600–$34,750 | $15,600–$34,750 |
| 3,000+ sq ft (30 squares) | $18,450–$40,500 | $18,450–$40,500 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Memphis metro · about 7% below the US average installer wage.
Memphis metro · about 7% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Collierville vs Memphis
Is metal roof installation cheaper in Collierville or Memphis?
Practically identical — expect around $20,850 for metal roof installation whichever city you're in.
Why does metal roof installation cost more in Memphis than Collierville?
Labor rates explain most of it — 0.96 in Memphis vs 0.96 in Collierville. A mixed climate versus mixed accounts for the rest.
How much is metal roof installation in Collierville, TN?
In Collierville, metal roof installation typically runs $12,700–$29,000 in 2026, with most homeowners paying around $20,850.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $29/hr in the Memphis area versus $29/hr around Memphis (BLS metro wage data). Since labor is roughly 60% of a metal roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Collierville and Memphis (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
Not on this basis — Collierville and Memphis cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik