Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits

Plumbing · Collierville, TN

How much does whole-house repipe cost in Collierville, TN? (2026)

In Collierville, whole-house repipe runs $3,500$7,900, with most paying around $5,700in line with the national average. Replacing a home's water supply piping — typically swapping old galvanized or failing pipe for PEX or copper.

Updated June 2026 · Localized estimate, not a quote

Collierville · 2026 estimate
$3,500 $7,900

Most homeowners pay around $5,700

$3,500typical $5,700$7,900
Typical cost
$5,700
Labor vs US
−8%
Climate
Mixed
Local permit
$225

Refine your estimate

Tune it to your home to narrow the whole-house repipe range.

Quality tier
Conditions & add-ons
Your adjusted estimate
$3,500 $7,900
Most likely $5,700

Key takeaways for Collierville

  • Expect $3,500 to $7,900 for whole-house repipe in Collierville; most quotes cluster near $5,700, in line with the national average.
  • This estimate departs from the national number mainly because Collierville labor sits −8% versus the US average.
  • A Plumbing permit in Collierville runs about $225 — it's already folded into the estimate above.
  • Schedule the replacement early — this typically holds up 50–100 years, and an emergency swap costs full price.
  • Booking during Off-peak winter for planned work typically saves about Around 5% versus peak-season pricing.
Price breakdown

What goes into the price in Collierville

A typical Collierville whole-house repipe of $5,700 breaks down roughly like this — materials priced near the national level, labor set by local rates.

Line itemCollierville 2026 range
Materials & equipmentHardware and supplies for the job; national pricing applies almost everywhere you go.$1,300 $3,050
Labor & installationInstall crew, removal and startup — the part local rates move most.$1,975 $4,625
Permit & feesThe Plumbing permit fee for this metro, based on local rates.$225
Total installed cost$3,500 $7,900

Split from the Collierville estimate using a 60% local-labor share; line items sum to the total.

Local factors

Why whole-house repipe costs what it does in Collierville

  • Labor in Collierville runs about 8% below the national average (based on price levels for the Memphis metro area), which lowers the installed price.
  • Budget about $225 for the local Plumbing permit in Collierville — already folded into the estimate above.
In this mixed-climate region, moderate depth keeps trenchless lining viable, which can spare the yard when whole-house repipe is needed. Ask contractors to price both trenchless and traditional dig — that choice matters more than climate here.
By size

Whole House Repipe cost by home size in Collierville

Repipe cost scales with how many bathrooms and fixtures the crew has to reach — more baths means more runs, more wall and ceiling access, and more labor. Pricing below assumes standard single-story access.

home sizeCollierville 2026 range
1 bath / ~1,000 sq ft$3,100 $5,500
2 bath / ~1,500 sq ft$3,850 $6,950
3 bath / ~2,000 sq ft$4,850 $8,850
4+ bath / 2,500+ sq ft$6,000 $11,750

National size ranges localized to Collierville labor and climate.

By type

Whole House Repipe cost by type in Collierville

PEX$3,500 $6,950
CPVC$4,050 $7,900
Copper$6,000 $14,650

Adjusted to Collierville from national type-level ranges.

By efficiency

Whole House Repipe cost by efficiency in Collierville

The pipe material drives both price and longevity. PEX is flexible, fast to run, and the cheapest to install; rigid copper costs more in material and labor but is the long-haul standard many buyers prefer.

PEX (cross-linked polyethylene)Cheapest to install; flexible, freeze-tolerant$3,100 $6,000
CPVCMid-cost rigid plastic; common in hot-water lines$3,600 $6,950
Copper (rigid)Highest cost; long lifespan, resale appeal$5,000 $11,750
Where the money goes

Labor vs. materials in Collierville

Labor (60%)
$3,400

Install crew, removal, permit & startup — the part Collierville rates move most.

Materials (40%)
$2,300

Equipment & materials — priced closer to the national level.

Split based on a typical $5,700 Collierville project; your mix varies with scope.

Skilled installers in the Memphis area earn about $29/hr (7% below the US average, per BLS metro wage data) — the local wage is what moves the labor half of your whole-house repipe cost.

Methodology

How we estimate it

National range$3,400 $8,000
Collierville labor adjustment×0.96
mixed climate factor×1
Local permit+$225
Collierville estimate$3,500 $7,900
Typical 2026
$5,700
Range
$3,500$7,900
Climate
mixed
Local permit
$225

Promo prices vs. the real cost

A trip charge and a project estimate answer different questions — don't read one as a preview of the other:

  • "Free" estimate on big jobs$0 — it's a sales visit
  • Camera inspection$100–$350 (sometimes waived)
  • Service / diagnostic call$75–$200
Hidden costs

Additional whole-house repipe costs to budget for

These hit some bids and skip others. The deciding factors are your home's condition, layout and what the crew finds once work begins.

Drywall & wall/ceiling patch + repaintCrews open walls to reach pipes; finishing is often separate$500 $3,000
Permit & inspection$100 $500
Move out / hotel during workWhole-house repipes can take 2–5 days with water off$0 $1,000
Replace shutoff valves & supply lines$150 $600
Slab access / concrete cut (slab homes)Only if lines run under a concrete slab$1,000 $4,000

Typical national add-on ranges; confirm locally during your quote.

What's included

  • Basic drywall patching and permit
  • Fixture reconnections
  • Removal of accessible old piping
  • New PEX or copper supply lines

What affects the cost

  • Slab vs crawlspace/basement access
  • PEX vs copper
  • Wall opening and patching needed
  • Home size and number of bathrooms

Ways to save on whole-house repipe in Collierville

  • Get multiple licensed-plumber bids
  • PEX costs less than copper and installs faster
  • Repipe during a remodel to share wall access
  • Act before a leak causes water damage
Lifespan

How long does whole-house repipe last in Collierville?

Expected lifespan
50100 years

PEX and CPVC last ~40–50+ years; copper commonly reaches 50–70+ years. A repipe is essentially a once-in-a-lifetime job.

Annual maintenance
$0$150/yr

Repiped supply lines need almost no upkeep; budget only for the occasional shutoff-valve or fixture check.

When to replace

Signs you need whole-house repipe in Collierville

  • Chronic low water pressure throughout the house
  • Rusty, brown, or metallic-tasting water (corroding pipes)
  • Frequent or repeated pinhole leaks and pipe repairs
  • Old galvanized steel, polybutylene, or lead supply pipes
  • Banging, knocking, or whistling pipes (water hammer / corrosion)
  • Visible corrosion, flaking, or green stains on exposed pipe
  • The home is 50+ years old on its original plumbing
Decision

Repair or replace in Collierville?

If you're patching the same lines more than once or twice a year — or the pipes are galvanized/polybutylene — a full repipe usually beats spending repeatedly on spot fixes.

Repair if…

  • A single, accessible leak in otherwise sound modern pipe (PEX/copper)
  • The rest of the system is under ~25 years old and leak-free
  • The damaged section is short and easy to isolate

Replace if…

  • Pipes are galvanized steel, polybutylene, or lead
  • Leaks keep recurring in different spots (systemic corrosion)
  • Water pressure and water quality are both declining
  • You're already gutting walls for a remodel (do it once)
Best time to buy

Cheapest time for whole-house repipe in Collierville

Emergency plumbing work is priced for urgency, full stop. A repipe or sewer line, on the other hand, is a project you can schedule — and scheduling it for a slow month gets you a slightly better rate and a crew that isn't rushing.

Best window
Off-peak winter for planned work
Avoid
Anytime it becomes an emergency
Off-peak savings
Around 5%
Treat a repipe as a project with a deadline you control: get bids in a quiet month before circumstances force an emergency-rate fix.
Reading your quotes

Why whole-house repipe quotes vary — and how to compare them fairly

A wide spread between bids rarely means someone is overcharging; it usually means they priced different work. Below is what moves the number and how to line the quotes up.

Why a quote looks high (or low)

  • Trenchless vs. traditional dig is a major price difference.
  • Scope is often unknown until a camera inspection confirms it.
  • Pipe material (PEX vs. copper) changes both cost and longevity.

Get an apples-to-apples bid

  • Confirm permits, inspection and restoration are included.
  • Compare pipe material on equal terms.
  • Clarify who owns the city-side portion of the line.
  • Require a camera inspection so the scope is confirmed before work.
Hiring

Questions to ask Collierville Plumbing pros

The only honest way to compare is to hold every quote to one checklist. Start with these.

  1. 1Trenchless vs. traditional dig — which fits my situation and why?
  2. 2Is a camera inspection included so we confirm the scope before digging?
  3. 3Are permits, inspection, and surface/landscape restoration included?
  4. 4What pipe material are you using (PEX vs. copper) and why?
  5. 5Who is responsible for the city-owned portion of the line?
FAQ

Whole House Repipe in Collierville

How much does whole-house repipe cost in Collierville, TN?

Most Collierville homeowners pay around $5,700 for whole-house repipe, though 2026 quotes stretch from $3,500 to $7,900. That's not a national average — it's adjusted for Collierville labor rates, mixed-climate factors and permit fees.

Is whole-house repipe more expensive in Collierville than average?

Collierville comes in about the same as the national average. The main reason is labor: it indexes at 0.96 relative to the national average. and the local Plumbing permit costs about $225.

Do I need a permit for whole-house repipe in Collierville?

The estimate above already covers the Plumbing permit Collierville generally requires for this job, so the $225 or so it costs won't land as a surprise.

What affects whole-house repipe cost the most?

Worth knowing first: replacing a home's water supply piping — typically swapping old galvanized or failing pipe for PEX or copper. Price swings mostly come down to equipment or material grade, the size and complexity of the home, local labor, and the mixed climate zone.

Editors' roundtable

How do you budget a major plumbing job?

Sewer lines and repipes don't come with a sticker price — the installation method and the condition of the ground move the number more than any material choice.

The material case

In freeze-prone regions PEX has the advantage: cheaper, quicker to run, and forgiving when temperatures drop. Copper asks for more up front but outlasts it and can nudge resale with certain buyers. The tiebreaker is your weather and your timeline in the house, not a blanket rule.

The diagnosis-first case

The estimate is only as honest as the inspection behind it. Push a camera down the line first and the scope becomes a documented fact — no padding for problems that aren't there, no ambush once the trench is open.

The method case

Trenchless runs a higher per-foot rate, but the savings hide in what you never have to rebuild — no torn-up driveway, no re-sodded lawn, no ripped-out patio. Open-cut digging only wins on price when there's almost nothing on top of the line to put back.

Our take

Underground surprises, not the plumber's brand, are what blow up a repipe or sewer budget. A camera inspection pins down the scope, a trenchless-versus-dig comparison should count the restoration bill and not just the trench, and the pipe material ought to suit your climate.

Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.

How we calculated this estimate

We start with 2026 national whole-house repipe ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Collierville using the BLS metro wage data labor index (×0.96 here), the IECC mixed-climate factor (×1) and a typical local permit fee (≈$225). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.

This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.

By Serhat ÖzçelikReviewed by Costadia EditorialUpdated June 2026Sources: BLS · BEA · IECC · IRS · DSIRE · industry cost data

References & data sources

Our Collierville whole-house repipe estimate is built from these primary, mostly government sources — not a single aggregator.

  1. Occupational Employment & Wage Statistics (metro wages)U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
  2. Regional Price Parities (state & metro)U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
  3. IECC Climate ZonesU.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
  4. Home Energy Tax Credits (25C / 25D)Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
  5. Database of State Incentives for Renewables & EfficiencyDSIRE — NC State University.State and utility incentive programs by ZIP code.
Plan ahead

Homeowners in Collierville often pair this with

A whole-house repipe rarely happens in isolation — these projects commonly come up alongside it.

Explore

Other projects in Collierville

Browse local 2026 costs for every home project in Collierville, TN.