Whole House Repipe cost: Beaverton vs Portland (2026)
Whole-house repipe costs about the same in Beaverton and Portland in 2026 — roughly $6,400 in each.
Beaverton OR
Typically around $6,400
Portland OR
Typically around $6,400
Beaverton vs Portland: full breakdown
| Factor | Beaverton | Portland |
|---|---|---|
| Typical 2026 cost | $6,400 | $6,400 |
| Estimated range | $3,900–$8,850 | $3,900–$8,850 |
| Labor index (vs US) | ×1.07 | ×1.07 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $275 | $275 |
| Labor share | $3,850 | $3,850 |
| Materials/equipment | $2,550 | $2,550 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national whole-house repipe range for local labor, climate and permits.
No real cost edge either way
Neither metro has a cost edge on whole-house repipe — spend your decision-making energy on the contractor, not the location.
Whole-house repipe by type: Beaverton vs Portland
We localize each whole-house repipe type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Beaverton | Portland |
|---|---|---|
| PEX | $3,900–$7,800 | $3,900–$7,800 |
| CPVC | $4,550–$8,850 | $4,550–$8,850 |
| Copper | $6,700–$16,350 | $6,700–$16,350 |
Treat these as 2026 localized estimates for whole-house repipe, not quotes from a contractor.
Whole-house repipe by home size: Beaverton vs Portland
Repipe cost scales with how many bathrooms and fixtures the crew has to reach — more baths means more runs, more wall and ceiling access, and more labor. Pricing below assumes standard single-story access.
| Size | Beaverton | Portland |
|---|---|---|
| 1 bath / ~1,000 sq ft | $3,500–$6,200 | $3,500–$6,200 |
| 2 bath / ~1,500 sq ft | $4,350–$7,800 | $4,350–$7,800 |
| 3 bath / ~2,000 sq ft | $5,450–$9,950 | $5,450–$9,950 |
| 4+ bath / 2,500+ sq ft | $6,700–$13,150 | $6,700–$13,150 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national whole-house repipe range for local labor, climate and permits.
What plumbing pros earn in each metro
With labor making up about 60% of a whole-house repipe job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for whole-house repipe in either city
Emergency plumbing work is priced for urgency, full stop. A repipe or sewer line, on the other hand, is a project you can schedule — and scheduling it for a slow month gets you a slightly better rate and a crew that isn't rushing.
How do you budget a major plumbing job?
There's no fixed price for a repipe or sewer job until you know the method and what's below the yard. Our editors on how to think about the scope.
The diagnosis-first case
The estimate is only as honest as the inspection behind it. Push a camera down the line first and the scope becomes a documented fact — no padding for problems that aren't there, no ambush once the trench is open.
The method case
Compare the two methods on the finished bill, not the excavation quote. Trenchless costs more to install yet skips restoring everything a trench destroys, while a conventional dig looks cheap right up until you price setting the yard right again.
The material case
In freeze-prone regions PEX has the advantage: cheaper, quicker to run, and forgiving when temperatures drop. Copper asks for more up front but outlasts it and can nudge resale with certain buyers. The tiebreaker is your weather and your timeline in the house, not a blanket rule.
Scope, not brand, is what sets a plumbing price. Confirm it with a camera inspection, compare trenchless against the full cost of a dig — landscaping included — and match pipe material to your climate.
Beaverton vs Portland
Is whole-house repipe cheaper in Beaverton or Portland?
Practically identical — expect around $6,400 for whole-house repipe whichever city you're in.
Why does whole-house repipe cost more in Portland than Beaverton?
It comes down to labor: Portland indexes at 1.07 against Beaverton's 1.07. The mixed-vs-mixed climate difference adds to the gap.
How much is whole-house repipe in Beaverton, OR?
Beaverton homeowners can expect $3,900 to $8,850 for whole-house repipe in 2026, with $6,400 the typical number.
Do plumbing pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $34.9/hr in Portland-Vancouver-Hillsboro compared with $34.9/hr in Portland-Vancouver-Hillsboro (BLS OEWS). Labor is about 60% of a whole-house repipe job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy whole-house repipe — and does it differ by city?
It doesn't vary by location — Off-peak winter for planned work is the discount window in both Beaverton and Portland (roughly Around 5% off), while anytime it becomes an emergency tends to be the most expensive in either city.
Should I choose where to live based on whole-house repipe cost?
No — the cost is essentially identical between Beaverton and Portland. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare whole-house repipe in other cities
Updated June 2026 · By Serhat Özçelik