Whole House Repipe cost: Beaverton vs Gresham (2026)
There's essentially no price gap here: whole-house repipe runs close to $6,400 in both Beaverton and Gresham in 2026.
Beaverton OR
Typically around $6,400
Gresham OR
Typically around $6,400
Beaverton vs Gresham: full breakdown
| Factor | Beaverton | Gresham |
|---|---|---|
| Typical 2026 cost | $6,400 | $6,400 |
| Estimated range | $3,900–$8,850 | $3,900–$8,850 |
| Labor index (vs US) | ×1.07 | ×1.07 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $275 | $275 |
| Labor share | $3,850 | $3,850 |
| Materials/equipment | $2,550 | $2,550 |
Treat these as 2026 localized estimates for whole-house repipe, not quotes from a contractor.
A wash — choose on quality, not city
The two metros are effectively a wash for whole-house repipe — pick on contractor quality and timing, not location.
Whole-house repipe by type: Beaverton vs Gresham
We localize each whole-house repipe type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Beaverton | Gresham |
|---|---|---|
| PEX | $3,900–$7,800 | $3,900–$7,800 |
| CPVC | $4,550–$8,850 | $4,550–$8,850 |
| Copper | $6,700–$16,350 | $6,700–$16,350 |
Whole-house repipe numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Whole-house repipe by home size: Beaverton vs Gresham
Repipe cost scales with how many bathrooms and fixtures the crew has to reach — more baths means more runs, more wall and ceiling access, and more labor. Pricing below assumes standard single-story access.
| Size | Beaverton | Gresham |
|---|---|---|
| 1 bath / ~1,000 sq ft | $3,500–$6,200 | $3,500–$6,200 |
| 2 bath / ~1,500 sq ft | $4,350–$7,800 | $4,350–$7,800 |
| 3 bath / ~2,000 sq ft | $5,450–$9,950 | $5,450–$9,950 |
| 4+ bath / 2,500+ sq ft | $6,700–$13,150 | $6,700–$13,150 |
Treat these as 2026 localized estimates for whole-house repipe, not quotes from a contractor.
What plumbing pros earn in each metro
With labor making up about 60% of a whole-house repipe job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for whole-house repipe in either city
An actual emergency always pays full rate — there's no negotiating room. But a planned repipe or sewer-line job can be timed to a slower month, where crews have more attention to give and a little more room on price.
How do you budget a major plumbing job?
Sewer lines and repipes don't come with a sticker price — the installation method and the condition of the ground move the number more than any material choice.
The diagnosis-first case
The estimate is only as honest as the inspection behind it. Push a camera down the line first and the scope becomes a documented fact — no padding for problems that aren't there, no ambush once the trench is open.
The method case
Compare the two methods on the finished bill, not the excavation quote. Trenchless costs more to install yet skips restoring everything a trench destroys, while a conventional dig looks cheap right up until you price setting the yard right again.
The material case
In freeze-prone regions PEX has the advantage: cheaper, quicker to run, and forgiving when temperatures drop. Copper asks for more up front but outlasts it and can nudge resale with certain buyers. The tiebreaker is your weather and your timeline in the house, not a blanket rule.
The number one rule for a big plumbing job: confirm the scope with a camera before you price anything. From there, weigh trenchless against total restoration cost and pick materials suited to your climate.
Beaverton vs Gresham
Is whole-house repipe cheaper in Beaverton or Gresham?
whole-house repipe costs about the same in both — roughly $6,400 in each city.
Why does whole-house repipe cost more in Gresham than Beaverton?
It comes down to labor: Gresham indexes at 1.07 against Beaverton's 1.07. The mixed-vs-mixed climate difference adds to the gap.
How much is whole-house repipe in Beaverton, OR?
Beaverton homeowners can expect $3,900 to $8,850 for whole-house repipe in 2026, with $6,400 the typical number.
Do plumbing pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $34.9/hr in Portland-Vancouver-Hillsboro compared with $34.9/hr in Portland-Vancouver-Hillsboro (BLS OEWS). Labor is about 60% of a whole-house repipe job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy whole-house repipe — and does it differ by city?
It doesn't vary by location — Off-peak winter for planned work is the discount window in both Beaverton and Gresham (roughly Around 5% off), while anytime it becomes an emergency tends to be the most expensive in either city.
Should I choose where to live based on whole-house repipe cost?
Not on this basis — Beaverton and Gresham cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.
Compare whole-house repipe in other cities
Updated June 2026 · By Serhat Özçelik