Whole House Repipe cost: Beaverton vs Hillsboro (2026)
Whole-house repipe costs about the same in Beaverton and Hillsboro in 2026 — roughly $6,400 in each.
Beaverton OR
Typically around $6,400
Hillsboro OR
Typically around $6,400
Beaverton vs Hillsboro: full breakdown
| Factor | Beaverton | Hillsboro |
|---|---|---|
| Typical 2026 cost | $6,400 | $6,400 |
| Estimated range | $3,900–$8,850 | $3,900–$8,850 |
| Labor index (vs US) | ×1.07 | ×1.07 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $275 | $275 |
| Labor share | $3,850 | $3,850 |
| Materials/equipment | $2,550 | $2,550 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national whole-house repipe range for local labor, climate and permits.
No real cost edge either way
The two metros are effectively a wash for whole-house repipe — pick on contractor quality and timing, not location.
Whole-house repipe by type: Beaverton vs Hillsboro
Each whole-house repipe option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Beaverton | Hillsboro |
|---|---|---|
| PEX | $3,900–$7,800 | $3,900–$7,800 |
| CPVC | $4,550–$8,850 | $4,550–$8,850 |
| Copper | $6,700–$16,350 | $6,700–$16,350 |
All figures are 2026 localized planning estimates for whole-house repipe — get an actual quote before you commit.
Whole-house repipe by home size: Beaverton vs Hillsboro
Repipe cost scales with how many bathrooms and fixtures the crew has to reach — more baths means more runs, more wall and ceiling access, and more labor. Pricing below assumes standard single-story access.
| Size | Beaverton | Hillsboro |
|---|---|---|
| 1 bath / ~1,000 sq ft | $3,500–$6,200 | $3,500–$6,200 |
| 2 bath / ~1,500 sq ft | $4,350–$7,800 | $4,350–$7,800 |
| 3 bath / ~2,000 sq ft | $5,450–$9,950 | $5,450–$9,950 |
| 4+ bath / 2,500+ sq ft | $6,700–$13,150 | $6,700–$13,150 |
Treat these as 2026 localized estimates for whole-house repipe, not quotes from a contractor.
What plumbing pros earn in each metro
Roughly 60% of what you pay for whole-house repipe is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for whole-house repipe in either city
The only real lever here is planning: emergencies pay top dollar no matter what, but a repipe or sewer-line replacement booked in an off-peak month costs a bit less and gets more careful work.
How do you budget a major plumbing job?
Sewer lines and repipes don't come with a sticker price — the installation method and the condition of the ground move the number more than any material choice.
The diagnosis-first case
Pricing a sewer or repipe off a hunch invites two bad outcomes: paying to replace pipe that's fine, or missing the section that's actually collapsed. A camera run through the line settles the question before a single dollar is committed.
The method case
Compare the two methods on the finished bill, not the excavation quote. Trenchless costs more to install yet skips restoring everything a trench destroys, while a conventional dig looks cheap right up until you price setting the yard right again.
The material case
In freeze-prone regions PEX has the advantage: cheaper, quicker to run, and forgiving when temperatures drop. Copper asks for more up front but outlasts it and can nudge resale with certain buyers. The tiebreaker is your weather and your timeline in the house, not a blanket rule.
Underground surprises, not the plumber's brand, are what blow up a repipe or sewer budget. A camera inspection pins down the scope, a trenchless-versus-dig comparison should count the restoration bill and not just the trench, and the pipe material ought to suit your climate.
Beaverton vs Hillsboro
Is whole-house repipe cheaper in Beaverton or Hillsboro?
Practically identical — expect around $6,400 for whole-house repipe whichever city you're in.
Why does whole-house repipe cost more in Hillsboro than Beaverton?
Labor rates explain most of it — 1.07 in Hillsboro vs 1.07 in Beaverton. A mixed climate versus mixed accounts for the rest.
How much is whole-house repipe in Beaverton, OR?
In Beaverton, whole-house repipe typically runs $3,900–$8,850 in 2026, with most homeowners paying around $6,400.
Do plumbing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $34.9/hr around Portland-Vancouver-Hillsboro versus $34.9/hr near Portland-Vancouver-Hillsboro. With labor making up about 60% of a whole-house repipe job, that difference carries straight through to the final price.
When is the cheapest time to buy whole-house repipe — and does it differ by city?
It doesn't vary by location — Off-peak winter for planned work is the discount window in both Beaverton and Hillsboro (roughly Around 5% off), while anytime it becomes an emergency tends to be the most expensive in either city.
Should I choose where to live based on whole-house repipe cost?
No — the cost is essentially identical between Beaverton and Hillsboro. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare whole-house repipe in other cities
Updated June 2026 · By Serhat Özçelik