Tile Roof Installation cost: Beaverton vs Hillsboro (2026)
Tile roof installation costs about the same in Beaverton and Hillsboro in 2026 — roughly $19,350 in each.
Beaverton OR
Typically around $19,350
Hillsboro OR
Typically around $19,350
Beaverton vs Hillsboro: full breakdown
| Factor | Beaverton | Hillsboro |
|---|---|---|
| Typical 2026 cost | $19,350 | $19,350 |
| Estimated range | $11,550–$27,150 | $11,550–$27,150 |
| Labor index (vs US) | ×1.07 | ×1.07 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $300 |
| Labor share | $11,600 | $11,600 |
| Materials/equipment | $7,750 | $7,750 |
These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.
No real cost edge either way
The two metros are effectively a wash for tile roof installation — pick on contractor quality and timing, not location.
Tile roof installation by type: Beaverton vs Hillsboro
Each tile roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Beaverton | Hillsboro |
|---|---|---|
| Concrete tile | $11,550–$22,850 | $11,550–$22,850 |
| Clay / terracotta tile | $15,300–$30,350 | $15,300–$30,350 |
| Slate | $21,750–$53,950 | $21,750–$53,950 |
These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.
Tile roof installation by roof size: Beaverton vs Hillsboro
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Beaverton | Hillsboro |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,800–$15,300 | $7,800–$15,300 |
| 1,500 sq ft (15 squares) | $9,950–$20,700 | $9,950–$20,700 |
| 2,000 sq ft (20 squares) | $11,550–$27,150 | $11,550–$27,150 |
| 2,500 sq ft (25 squares) | $14,250–$32,500 | $14,250–$32,500 |
| 3,000+ sq ft (30 squares) | $17,450–$38,950 | $17,450–$38,950 |
These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a tile roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
Full tear-off, architectural shingles and a written deck-repair rate protect you from the two big risks — hidden rot and warranty gaps. The lowest storm-season bid is rarely the cheapest over the roof's life.
Beaverton vs Hillsboro
Is tile roof installation cheaper in Beaverton or Hillsboro?
Not really — both cities land at almost the same number for tile roof installation, around $19,350 each.
Why does tile roof installation cost more in Hillsboro than Beaverton?
The main driver is local labor rates: Hillsboro's labor index is 1.07 versus 1.07 in Beaverton. Climate zone (mixed vs mixed) also shift the total.
How much is tile roof installation in Beaverton, OR?
Expect to pay $11,550 to $27,150 for tile roof installation in Beaverton in 2026, averaging around $19,350.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $34.9/hr around Portland-Vancouver-Hillsboro versus $34.9/hr near Portland-Vancouver-Hillsboro. With labor making up about 60% of a tile roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy tile roof installation — and does it differ by city?
No, the seasonal pattern is the same in Beaverton and Hillsboro: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on tile roof installation cost?
No — the cost is essentially identical between Beaverton and Hillsboro. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik