Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Tile Roof Installation cost: Beaverton vs Eugene (2026)

Beaverton runs 4% higher than Eugene for tile roof installation — expect around $19,350 in Beaverton against $18,600 in Eugene, a difference of about $750.

Beaverton OR

$11,550 $27,150

Typically around $19,350

Eugene OR

Lower cost
$11,100 $26,050

Typically around $18,600

Beaverton costs about $750 (4%) more than Eugene for tile roof installation, largely because of the local labor rate gap.
Side by side

Beaverton vs Eugene: full breakdown

FactorBeavertonEugene
Typical 2026 cost$19,350$18,600
Estimated range$11,550–$27,150$11,100–$26,050
Labor index (vs US)×1.07×1.03
Climate zoneMixedMixed
Climate factor×1×1
Local permit$300$300
Labor share$11,600$11,150
Materials/equipment$7,750$7,450

These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.

The verdict

How much should this gap actually matter?

At 4%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for tile roof installation — focus on the contractor, not the city.

By type

Tile roof installation by type: Beaverton vs Eugene

Every tile roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.

TypeBeavertonEugene
Concrete tile$11,550$22,850$11,100$21,950
Clay / terracotta tile$15,300$30,350$14,700$29,150
Slate$21,750$53,950$20,900$51,800

Treat these as 2026 localized estimates for tile roof installation, not quotes from a contractor.

By size

Tile roof installation by roof size: Beaverton vs Eugene

Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.

SizeBeavertonEugene
1,000 sq ft (10 squares)$7,800$15,300$7,500$14,700
1,500 sq ft (15 squares)$9,950$20,700$9,550$19,850
2,000 sq ft (20 squares)$11,550$27,150$11,100$26,050
2,500 sq ft (25 squares)$14,250$32,500$13,700$31,200
3,000+ sq ft (30 squares)$17,450$38,950$16,800$37,400

All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.

Local labor reality

What roofing pros earn in each metro

Roughly 60% of what you pay for tile roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.

Beaverton, OR
$34.9/hr

Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.

Eugene, OR
Modeled from state data

No BLS metro wage series for Eugene; we use Oregon regional price parity instead.

Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).

Best time to buy

Cheapest time for tile roof installation in either city

Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.

The value case

Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.

The do-it-right case

Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.

The risk case

Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.

Our take

A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.

FAQ

Beaverton vs Eugene

Is tile roof installation cheaper in Beaverton or Eugene?

Eugene wins on price: tile roof installation runs about $18,600 there versus $19,350 in Beaverton, a gap of roughly $750 (4%) as of 2026.

Why does tile roof installation cost more in Beaverton than Eugene?

The main driver is local labor rates: Beaverton's labor index is 1.07 versus 1.03 in Eugene. Climate zone (mixed vs mixed) also shift the total.

How much is tile roof installation in Beaverton, OR?

Beaverton homeowners can expect $11,550 to $27,150 for tile roof installation in 2026, with $19,350 the typical number.

When is the cheapest time to buy tile roof installation — and does it differ by city?

The best window is the same in both Beaverton and Eugene: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.

Should I choose where to live based on tile roof installation cost?

Probably not. Yes, $750 is a real gap, but it's a one-time cost you can partly offset in Beaverton with off-season timing and tighter bids. Long-term factors like energy prices and home condition matter more than this one number.

Keep comparing

Compare tile roof installation in other cities

Updated June 2026 · By Serhat Özçelik