Roofing · Beaverton, OR
How much does tile roof installation cost in Beaverton, OR? (2026)
In Beaverton, tile roof installation runs $11,550–$27,150, with most paying around $19,350 — about 9% above the national average. Installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $19,350
- Typical cost
- $19,350
- Labor vs US
- +9%
- Climate
- Mixed
- Local permit
- $300
Refine your estimate
Tune it to your home to narrow the tile roof installation range.
Key takeaways for Beaverton
- Priced about 9% above the national average, tile roof installation in Beaverton spans $11,550 to $27,150 — figure $19,350 for a standard job.
- Labor is the swing factor here: Beaverton trades bill +9% relative to the national average.
- Around $300 of the range above goes to the local Roofing permit, not an extra line item.
- A well-installed job here typically lasts 50–100 years — plan the next replacement instead of waiting for an emergency one.
- Cheapest time to buy: Late spring to early fall (dry, 45–85°F) — roughly 5–10% off peak-season pricing.
What goes into the price in Beaverton
A typical Beaverton tile roof installation of $19,350 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Beaverton 2026 range |
|---|---|
| Materials & equipmentThe equipment and materials themselves — this part barely shifts by location. | $4,500 – $10,750 |
| Labor & installationLabor to remove the old system and install the new one — this is where your city's wage index shows up. | $6,750 – $16,100 |
| Permit & feesRoofing permit cost, adjusted to this city's rate. | $300 |
| Total installed cost | $11,550 – $27,150 |
Split from the Beaverton estimate using a 60% local-labor share; line items sum to the total.
Why tile roof installation costs what it does in Beaverton
- Expect labor here to run 9% above the national norm (based on price levels for the Portland-Vancouver-Hillsboro metro area) — that's what raises the total.
- Beaverton's Roofing permit runs roughly $300, which is already part of the number above.
Tile Roof Installation cost by roof size in Beaverton
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| roof size | Beaverton 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $7,800 – $15,300 |
| 1,500 sq ft (15 squares) | $9,950 – $20,700 |
| 2,000 sq ft (20 squares) | $11,550 – $27,150 |
| 2,500 sq ft (25 squares) | $14,250 – $32,500 |
| 3,000+ sq ft (30 squares) | $17,450 – $38,950 |
National size ranges localized to Beaverton labor and climate.
Tile Roof Installation cost by type in Beaverton
| Concrete tile | $11,550 – $22,750 |
| Clay / terracotta tile | $15,300 – $30,250 |
| Slate | $21,700 – $53,800 |
Adjusted to Beaverton from national type-level ranges.
Tile Roof Installation cost by efficiency in Beaverton
Concrete is the affordable workhorse; clay (terracotta) holds its color and resists fade in hot, sunny climates; slate is the premium natural-stone option with the longest life.
| Concrete tileLowest-cost tile; heavy; ~50 yr life | $11,550 – $21,750 |
| Clay / terracotta tileFade-resistant, ideal in hot/coastal climates; 50–100 yr | $15,300 – $27,150 |
| Natural slatePremium stone; 75–100+ yr life | $21,750 – $48,600 |
Labor vs. materials in Beaverton
Install crew, removal, permit & startup — the part Beaverton rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $19,350 Beaverton project; your mix varies with scope.
Skilled installers in the Portland-Vancouver-Hillsboro area earn about $34.9/hr (12% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your tile roof installation cost.
How we estimate it
| National range | $10,500 – $25,000 |
| Beaverton labor adjustment | ×1.07 |
| mixed climate factor | ×1 |
| Local permit | +$300 |
| Beaverton estimate | $11,550 – $27,150 |
Promo prices vs. the real cost
A low per-square roofing number in an ad means little until you know what scope it covers. Set these marketing figures against the real estimate above:
- Financing offers$0 down · low APR
- Free roof inspection$0 — it's a sales visit
- Per-square teaser priceadvertised low; varies by pitch & material
Additional tile roof installation costs to budget for
These hit some bids and skip others. The deciding factors are your home's condition, layout and what the crew finds once work begins.
| Tear-off & disposal of old roofTile is heavy — disposal costs more than asphalt | $1,000 – $4,000 |
| Structural reinforcement for tile weightOften required; tile is much heavier than asphalt | $1,000 – $10,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-grade, replaced mid-life)Underlayment wears out before the tile and is re-done | $500 – $2,500 |
| Flashing, valleys & ridge work | $500 – $2,500 |
| Permit | $200 – $600 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Tear-off and structural check
- Labor, cleanup and permit
- Reinforced underlayment and battens
- Concrete or clay tiles
What affects the cost
- Pitch, complexity and hip/valley count
- Concrete vs clay tile
- Roof structure may need reinforcement for tile weight
- Specialty flashing and ridge work
Ways to save on tile roof installation in Beaverton
- Reuse intact tiles where possible on repairs
- Tiles last 50+ years — strong lifetime value
- Confirm framing can carry the load before buying
- Concrete tile costs less than clay with similar life
How long does tile roof installation last in Beaverton?
Concrete tile lasts ~50 years; clay and slate 75–100+. The underlayment beneath is usually replaced once mid-life.
Inspect for cracked or slipped tiles and clear debris; the bigger periodic cost is replacing worn underlayment.
Signs you need tile roof installation in Beaverton
- Cracked, chipped, or broken tiles after hail, foot traffic, or freeze-thaw
- Slipped or missing tiles leaving gaps in the field
- Leaks or attic moisture pointing to failed underlayment beneath sound tiles
- Efflorescence, deep staining, or flaking on the tile surface
- Sagging areas — a sign the structure is straining under the weight
- Failed flashing in valleys or around penetrations
Repair or replace in Beaverton?
Repair if…
- Only a handful of tiles are cracked or slipped
- The underlayment is still sound and leaks are isolated
- Flashing has failed but tiles and structure are fine
Replace if…
- The underlayment has failed across the roof (consider a lift-and-relay first)
- Widespread tile cracking or fading from age or hail
- The roof structure is sagging or can't support the load
Cost calculator
Roof cost by material in Beaverton, OR
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Beaverton, OR labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $7,500–$12,850 | $350/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $8,550–$17,100 | $500/yr |
Standing-seam metal High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $19,250–$34,250 | $500/yr |
Clay / concrete tileThis page Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $21,400–$42,800 | $500/yr |
Per-square ranges are national installed benchmarks localized to Beaverton, OR labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for tile roof installation in Beaverton
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Why tile roof installation quotes vary — and how to compare them fairly
A wide spread between bids rarely means someone is overcharging; it usually means they priced different work. Below is what moves the number and how to line the quotes up.
Why a quote looks high (or low)
- Shingle tier (3-tab vs. architectural vs. premium) changes both material and labor.
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
- Deck repair, underlayment grade and ventilation may or may not be in the price.
Get an apples-to-apples bid
- Specify tear-off vs. overlay so all bids match.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
- Verify the contractor is licensed, insured and local, with recent references.
- Ask how deck/sheathing repairs are priced if rot is found.
Questions to ask Beaverton Roofing pros
Level the field before you choose — ask each bidder the same questions and watch how the answers differ.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Tile Roof Installation in Beaverton
How much does tile roof installation cost in Beaverton, OR?
Beaverton's going rate for tile roof installation is $11,550–$27,150 in 2026, with $19,350 the number most homeowners end up paying. Beaverton labor rates, the mixed climate and permit fees each shift the total, and all three already sit inside this range.
Is tile roof installation more expensive in Beaverton than average?
Put Beaverton next to the national picture and it lands about 9% higher than the national average; the labor index of 1.07 explains the bulk of it. and the local Roofing permit costs about $300.
Do I need a permit for tile roof installation in Beaverton?
In Beaverton, this usually needs a Roofing permit (around $300). The estimate above already accounts for it.
What affects tile roof installation cost the most?
Installing a concrete or clay tile roof — durable and energy-efficient, common in hot climates. From there, a handful of specifics push the final number up or down. Grade of equipment and materials tops the list, followed by home size and complexity, local labor, and the mixed climate zone.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The value case
For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national tile roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Beaverton using the BLS metro wage data labor index (×1.07 here), the IECC mixed-climate factor (×1) and a typical local permit fee (≈$300). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Beaverton tile roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Tile roof installation alternatives in Beaverton
Homeowners in Beaverton often pair this with
A tile roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Beaverton
Browse local 2026 costs for every home project in Beaverton, OR.