Tile Roof Installation cost: Beaverton vs Gresham (2026)
Beaverton and Gresham are a near-perfect match on tile roof installation cost in 2026, both landing around $19,350.
Beaverton OR
Typically around $19,350
Gresham OR
Typically around $19,350
Beaverton vs Gresham: full breakdown
| Factor | Beaverton | Gresham |
|---|---|---|
| Typical 2026 cost | $19,350 | $19,350 |
| Estimated range | $11,550–$27,150 | $11,550–$27,150 |
| Labor index (vs US) | ×1.07 | ×1.07 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $300 |
| Labor share | $11,600 | $11,600 |
| Materials/equipment | $7,750 | $7,750 |
Tile roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
No real cost edge either way
This is a statistical tie on tile roof installation cost, so let contractor reputation and project timing decide, not geography.
Tile roof installation by type: Beaverton vs Gresham
We localize each tile roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Beaverton | Gresham |
|---|---|---|
| Concrete tile | $11,550–$22,850 | $11,550–$22,850 |
| Clay / terracotta tile | $15,300–$30,350 | $15,300–$30,350 |
| Slate | $21,750–$53,950 | $21,750–$53,950 |
All figures are 2026 localized planning estimates for tile roof installation — get an actual quote before you commit.
Tile roof installation by roof size: Beaverton vs Gresham
Tile is priced per square (100 sq ft) and runs about $7–$15 per sq ft installed. Its weight matters: many homes need the roof structure reinforced before concrete or clay tile can go on.
| Size | Beaverton | Gresham |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,800–$15,300 | $7,800–$15,300 |
| 1,500 sq ft (15 squares) | $9,950–$20,700 | $9,950–$20,700 |
| 2,000 sq ft (20 squares) | $11,550–$27,150 | $11,550–$27,150 |
| 2,500 sq ft (25 squares) | $14,250–$32,500 | $14,250–$32,500 |
| 3,000+ sq ft (30 squares) | $17,450–$38,950 | $17,450–$38,950 |
These are 2026 planning figures for tile roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
Labor is about 60% of a tile roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for tile roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Beaverton vs Gresham
Is tile roof installation cheaper in Beaverton or Gresham?
Practically identical — expect around $19,350 for tile roof installation whichever city you're in.
Why does tile roof installation cost more in Gresham than Beaverton?
Labor rates explain most of it — 1.07 in Gresham vs 1.07 in Beaverton. A mixed climate versus mixed accounts for the rest.
How much is tile roof installation in Beaverton, OR?
In Beaverton, tile roof installation typically runs $11,550–$27,150 in 2026, with most homeowners paying around $19,350.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $34.9/hr in the Portland-Vancouver-Hillsboro area and $34.9/hr in Portland-Vancouver-Hillsboro. Given labor is around 60% of a tile roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy tile roof installation — and does it differ by city?
No, the seasonal pattern is the same in Beaverton and Gresham: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on tile roof installation cost?
No — the cost is essentially identical between Beaverton and Gresham. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare tile roof installation in other cities
Updated June 2026 · By Serhat Özçelik