Metal Roof Installation cost: Enid vs Oklahoma City (2026)
Metal roof installation costs about the same in Enid and Oklahoma City in 2026 — roughly $20,850 in each.
Enid OK
Typically around $20,850
Oklahoma City OK
Typically around $20,850
Enid vs Oklahoma City: full breakdown
| Factor | Enid | Oklahoma City |
|---|---|---|
| Typical 2026 cost | $20,850 | $20,850 |
| Estimated range | $12,700–$28,950 | $12,700–$28,950 |
| Labor index (vs US) | ×0.96 | ×0.96 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $12,500 | $12,500 |
| Materials/equipment | $8,350 | $8,350 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Basically a tie — focus on the contractor
This is a statistical tie on metal roof installation cost, so let contractor reputation and project timing decide, not geography.
Metal roof installation by type: Enid vs Oklahoma City
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Enid | Oklahoma City |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,850–$17,450 | $8,850–$17,450 |
| Standing-seam steel | $17,450–$33,700 | $17,450–$33,700 |
| Aluminum | $13,650–$27,000 | $13,650–$27,000 |
| Copper | $28,950–$57,600 | $28,950–$57,600 |
| Zinc | $27,000–$52,850 | $27,000–$52,850 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Enid vs Oklahoma City
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Enid | Oklahoma City |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,900–$15,550 | $7,900–$15,550 |
| 1,500 sq ft (15 squares) | $10,750–$22,250 | $10,750–$22,250 |
| 2,000 sq ft (20 squares) | $12,700–$28,950 | $12,700–$28,950 |
| 2,500 sq ft (25 squares) | $15,550–$34,650 | $15,550–$34,650 |
| 3,000+ sq ft (30 squares) | $18,400–$40,400 | $18,400–$40,400 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Oklahoma City metro · about 7% below the US average installer wage.
Oklahoma City metro · about 7% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Enid vs Oklahoma City
Is metal roof installation cheaper in Enid or Oklahoma City?
metal roof installation costs about the same in both — roughly $20,850 in each city.
Why does metal roof installation cost more in Oklahoma City than Enid?
It comes down to labor: Oklahoma City indexes at 0.96 against Enid's 0.96. The mixed-vs-mixed climate difference adds to the gap.
How much is metal roof installation in Enid, OK?
metal roof installation in Enid runs $12,700–$28,950 as of 2026 — most jobs land near $20,850.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $28.9/hr around Oklahoma City versus $28.9/hr near Oklahoma City. With labor making up about 60% of a metal roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Enid and Oklahoma City: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Cost shouldn't be the deciding factor between Enid and Oklahoma City — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik