Metal Roof Installation cost: Broken Arrow vs Enid (2026)
The two metros aren't quite in sync on metal roof installation: Broken Arrow sits 1% below Enid, or roughly $20,600 versus $20,850 — about $250 apart.
Broken Arrow OK
Lower costTypically around $20,600
Enid OK
Typically around $20,850
Broken Arrow vs Enid: full breakdown
| Factor | Broken Arrow | Enid |
|---|---|---|
| Typical 2026 cost | $20,600 | $20,850 |
| Estimated range | $12,550–$28,650 | $12,700–$28,950 |
| Labor index (vs US) | ×0.95 | ×0.96 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $12,350 | $12,500 |
| Materials/equipment | $8,250 | $8,350 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Is the gap worth worrying about?
That 1% gap is small — for metal roof installation it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.
Metal roof installation by type: Broken Arrow vs Enid
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Broken Arrow | Enid |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,750–$17,300 | $8,850–$17,450 |
| Standing-seam steel | $17,300–$33,350 | $17,450–$33,700 |
| Aluminum | $13,500–$26,750 | $13,650–$27,000 |
| Copper | $28,650–$57,000 | $28,950–$57,600 |
| Zinc | $26,750–$52,300 | $27,000–$52,850 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Broken Arrow vs Enid
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Broken Arrow | Enid |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,800–$15,400 | $7,900–$15,550 |
| 1,500 sq ft (15 squares) | $10,650–$22,000 | $10,750–$22,250 |
| 2,000 sq ft (20 squares) | $12,550–$28,650 | $12,700–$28,950 |
| 2,500 sq ft (25 squares) | $15,400–$34,300 | $15,550–$34,650 |
| 3,000+ sq ft (30 squares) | $18,200–$40,000 | $18,400–$40,400 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
No BLS metro wage series for Broken Arrow; we use Oklahoma regional price parity instead.
Oklahoma City metro · about 7% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Broken Arrow vs Enid
Is metal roof installation cheaper in Broken Arrow or Enid?
Yes — Enid costs more. Expect around $20,850 for metal roof installation there against $20,600 in Broken Arrow, about $250 (1%) apart in 2026.
Why does metal roof installation cost more in Enid than Broken Arrow?
Labor rates explain most of it — 0.96 in Enid vs 0.95 in Broken Arrow. A mixed climate versus mixed accounts for the rest.
How much is metal roof installation in Broken Arrow, OK?
Broken Arrow homeowners can expect $12,550 to $28,650 for metal roof installation in 2026, with $20,600 the typical number.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Broken Arrow and Enid, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
Not really — the $250 gap is one-time, and smart timing and tighter quotes in Enid can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik