Metal Roof Installation cost: Enid vs Lawton (2026)
In 2026, metal roof installation is about 5% more expensive in Enid than in Lawton. Most homeowners pay around $20,850 in Enid versus $19,850 in Lawton — a gap of roughly $1,000.
Enid OK
Typically around $20,850
Lawton OK
Lower costTypically around $19,850
Enid vs Lawton: full breakdown
| Factor | Enid | Lawton |
|---|---|---|
| Typical 2026 cost | $20,850 | $19,850 |
| Estimated range | $12,700–$28,950 | $12,100–$27,550 |
| Labor index (vs US) | ×0.96 | ×0.91 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $12,500 | $11,900 |
| Materials/equipment | $8,350 | $7,950 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
How much should this gap actually matter?
At 5%, this gap is small enough that it's usually swallowed by normal quote-to-quote variation for metal roof installation — focus on the contractor, not the city.
Metal roof installation by type: Enid vs Lawton
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Enid | Lawton |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,850–$17,450 | $8,450–$16,650 |
| Standing-seam steel | $17,450–$33,700 | $16,650–$32,100 |
| Aluminum | $13,650–$27,000 | $13,000–$25,750 |
| Copper | $28,950–$57,600 | $27,550–$54,850 |
| Zinc | $27,000–$52,850 | $25,750–$50,300 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Enid vs Lawton
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Enid | Lawton |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,900–$15,550 | $7,550–$14,800 |
| 1,500 sq ft (15 squares) | $10,750–$22,250 | $10,250–$21,200 |
| 2,000 sq ft (20 squares) | $12,700–$28,950 | $12,100–$27,550 |
| 2,500 sq ft (25 squares) | $15,550–$34,650 | $14,800–$33,000 |
| 3,000+ sq ft (30 squares) | $18,400–$40,400 | $17,550–$38,450 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Oklahoma City metro · about 7% below the US average installer wage.
No BLS metro wage series for Lawton; we use Oklahoma regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles seal properly only in warm, dry conditions, which is exactly when everyone else wants a new roof too — especially right after a summer hailstorm. Lock in a late-fall or winter booking for a spring install and you skip that rush.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
The surprise that wrecks a roofing budget is rot in the decking, and you rarely see it until the old shingles come off. Fix the price per replacement sheet in the contract before the crew starts, so a low bid can't quietly climb once the deck is open.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Enid vs Lawton
Is metal roof installation cheaper in Enid or Lawton?
In 2026, metal roof installation is cheaper in Lawton at about $19,850, versus $20,850 in Enid — a difference of about $1,000 (5%).
Why does metal roof installation cost more in Enid than Lawton?
Enid's higher labor index (0.96 vs 0.91 in Lawton) is the biggest factor, with the mixed/mixed climate split playing a smaller role.
How much is metal roof installation in Enid, OK?
Enid homeowners can expect $12,700 to $28,950 for metal roof installation in 2026, with $20,850 the typical number.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Enid and Lawton: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $1,000 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Enid can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik