Metal Roof Installation cost: Edmond vs Oklahoma City (2026)
In 2026, Edmond and Oklahoma City land on nearly identical metal roof installation pricing — about $20,850 either way.
Edmond OK
Typically around $20,850
Oklahoma City OK
Typically around $20,850
Edmond vs Oklahoma City: full breakdown
| Factor | Edmond | Oklahoma City |
|---|---|---|
| Typical 2026 cost | $20,850 | $20,850 |
| Estimated range | $12,700–$28,950 | $12,700–$28,950 |
| Labor index (vs US) | ×0.96 | ×0.96 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $12,500 | $12,500 |
| Materials/equipment | $8,350 | $8,350 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Basically a tie — focus on the contractor
The two metros are effectively a wash for metal roof installation — pick on contractor quality and timing, not location.
Metal roof installation by type: Edmond vs Oklahoma City
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Edmond | Oklahoma City |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,850–$17,450 | $8,850–$17,450 |
| Standing-seam steel | $17,450–$33,700 | $17,450–$33,700 |
| Aluminum | $13,650–$27,000 | $13,650–$27,000 |
| Copper | $28,950–$57,600 | $28,950–$57,600 |
| Zinc | $27,000–$52,850 | $27,000–$52,850 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Edmond vs Oklahoma City
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Edmond | Oklahoma City |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,900–$15,550 | $7,900–$15,550 |
| 1,500 sq ft (15 squares) | $10,750–$22,250 | $10,750–$22,250 |
| 2,000 sq ft (20 squares) | $12,700–$28,950 | $12,700–$28,950 |
| 2,500 sq ft (25 squares) | $15,550–$34,650 | $15,550–$34,650 |
| 3,000+ sq ft (30 squares) | $18,400–$40,400 | $18,400–$40,400 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Oklahoma City metro · about 7% below the US average installer wage.
Oklahoma City metro · about 7% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Judge a roofing bid on its scope, not its bottom line — a genuine tear-off, a documented per-sheet deck rate, and a mid-grade architectural shingle. Those three close the gaps that let a low storm-season number balloon over the years.
Edmond vs Oklahoma City
Is metal roof installation cheaper in Edmond or Oklahoma City?
There's no meaningful difference: metal roof installation runs about $20,850 in both places.
Why does metal roof installation cost more in Oklahoma City than Edmond?
Labor rates explain most of it — 0.96 in Oklahoma City vs 0.96 in Edmond. A mixed climate versus mixed accounts for the rest.
How much is metal roof installation in Edmond, OK?
Expect to pay $12,700 to $28,950 for metal roof installation in Edmond in 2026, averaging around $20,850.
Do roofing pros really charge more in one city?
They do, and the BLS wage data confirms it: installers earn about $28.9/hr around Oklahoma City versus $28.9/hr near Oklahoma City. With labor making up about 60% of a metal roof installation job, that difference carries straight through to the final price.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Edmond and Oklahoma City: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Not on this basis — Edmond and Oklahoma City cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik