Localized for 1,000+ U.S. cities — adjusted for local labor, climate & permits
City comparison

Metal Roof Installation cost: Edmond vs Lawton (2026)

Budget-wise, metal roof installation in Edmond ($20,850) runs 5% more than in Lawton ($19,850), a roughly $1,000 spread.

Edmond OK

$12,700 $28,950

Typically around $20,850

Lawton OK

Lower cost
$12,100 $27,550

Typically around $19,850

The $1,000 (5%) premium on metal roof installation in Edmond versus Lawton comes down mostly to local labor rates.
Side by side

Edmond vs Lawton: full breakdown

FactorEdmondLawton
Typical 2026 cost$20,850$19,850
Estimated range$12,700–$28,950$12,100–$27,550
Labor index (vs US)×0.96×0.91
Climate zoneMixedMixed
Climate factor×1×1
Local permit$250$250
Labor share$12,500$11,900
Materials/equipment$8,350$7,950

Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.

The verdict

How much should this gap actually matter?

That 5% gap is small — for metal roof installation it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.

By type

Metal roof installation by type: Edmond vs Lawton

We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.

TypeEdmondLawton
Corrugated steel (exposed fastener)$8,850$17,450$8,450$16,650
Standing-seam steel$17,450$33,700$16,650$32,100
Aluminum$13,650$27,000$13,000$25,750
Copper$28,950$57,600$27,550$54,850
Zinc$27,000$52,850$25,750$50,300

These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.

By size

Metal roof installation by roof size: Edmond vs Lawton

Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.

SizeEdmondLawton
1,000 sq ft (10 squares)$7,900$15,550$7,550$14,800
1,500 sq ft (15 squares)$10,750$22,250$10,250$21,200
2,000 sq ft (20 squares)$12,700$28,950$12,100$27,550
2,500 sq ft (25 squares)$15,550$34,650$14,800$33,000
3,000+ sq ft (30 squares)$18,400$40,400$17,550$38,450

These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.

Local labor reality

What roofing pros earn in each metro

With labor making up about 60% of a metal roof installation job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.

Edmond, OK
$28.9/hr

Oklahoma City metro · about 7% below the US average installer wage.

Lawton, OK
Modeled from state data

No BLS metro wage series for Lawton; we use Oklahoma regional price parity instead.

Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).

Best time to buy

Cheapest time for metal roof installation in either city

Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.

Best window
Late spring to early fall (dry, 45–85°F)
Avoid
Mid-winter and the post-storm rush
Off-peak savings
5–10%
Editors' roundtable

Where does a smart roofing budget go in 2026?

The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.

The do-it-right case

Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.

The risk case

Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.

The value case

For a typical home, the architectural shingle is the default that makes sense. It outlasts 3-tab by a wide margin at a modest premium, and it spares you the cost of metal or tile that most roofs never need to justify.

Our take

Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.

FAQ

Edmond vs Lawton

Is metal roof installation cheaper in Edmond or Lawton?

Lawton wins on price: metal roof installation runs about $19,850 there versus $20,850 in Edmond, a gap of roughly $1,000 (5%) as of 2026.

Why does metal roof installation cost more in Edmond than Lawton?

It comes down to labor: Edmond indexes at 0.96 against Lawton's 0.91. The mixed-vs-mixed climate difference adds to the gap.

How much is metal roof installation in Edmond, OK?

metal roof installation in Edmond runs $12,700–$28,950 as of 2026 — most jobs land near $20,850.

When is the cheapest time to buy metal roof installation — and does it differ by city?

It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Edmond and Lawton (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.

Should I choose where to live based on metal roof installation cost?

That would be a stretch. $1,000 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Edmond can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.

Keep comparing

Compare metal roof installation in other cities

Updated June 2026 · By Serhat Özçelik