Metal Roof Installation cost: Broken Arrow vs Edmond (2026)
Broken Arrow runs 1% lower than Edmond for metal roof installation — expect around $20,600 in Broken Arrow against $20,850 in Edmond, a difference of about $250.
Broken Arrow OK
Lower costTypically around $20,600
Edmond OK
Typically around $20,850
Broken Arrow vs Edmond: full breakdown
| Factor | Broken Arrow | Edmond |
|---|---|---|
| Typical 2026 cost | $20,600 | $20,850 |
| Estimated range | $12,550–$28,650 | $12,700–$28,950 |
| Labor index (vs US) | ×0.95 | ×0.96 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $12,350 | $12,500 |
| Materials/equipment | $8,250 | $8,350 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Is the price difference a dealbreaker?
That 1% gap is small — for metal roof installation it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.
Metal roof installation by type: Broken Arrow vs Edmond
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Broken Arrow | Edmond |
|---|---|---|
| Corrugated steel (exposed fastener) | $8,750–$17,300 | $8,850–$17,450 |
| Standing-seam steel | $17,300–$33,350 | $17,450–$33,700 |
| Aluminum | $13,500–$26,750 | $13,650–$27,000 |
| Copper | $28,650–$57,000 | $28,950–$57,600 |
| Zinc | $26,750–$52,300 | $27,000–$52,850 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Metal roof installation by roof size: Broken Arrow vs Edmond
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Broken Arrow | Edmond |
|---|---|---|
| 1,000 sq ft (10 squares) | $7,800–$15,400 | $7,900–$15,550 |
| 1,500 sq ft (15 squares) | $10,650–$22,000 | $10,750–$22,250 |
| 2,000 sq ft (20 squares) | $12,550–$28,650 | $12,700–$28,950 |
| 2,500 sq ft (25 squares) | $15,400–$34,300 | $15,550–$34,650 |
| 3,000+ sq ft (30 squares) | $18,200–$40,000 | $18,400–$40,400 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
No BLS metro wage series for Broken Arrow; we use Oklahoma regional price parity instead.
Oklahoma City metro · about 7% below the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The do-it-right case
Skipping the tear-off means burying whatever's failing underneath, and a second layer bakes the shingles from below until they curl early. Doing it properly means stripping to the deck, then paying for real underlayment, flashing and airflow — the work that sets how long the roof lasts, not just how it looks the first week.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Broken Arrow vs Edmond
Is metal roof installation cheaper in Broken Arrow or Edmond?
Broken Arrow wins on price: metal roof installation runs about $20,600 there versus $20,850 in Edmond, a gap of roughly $250 (1%) as of 2026.
Why does metal roof installation cost more in Edmond than Broken Arrow?
It comes down to labor: Edmond indexes at 0.96 against Broken Arrow's 0.95. The mixed-vs-mixed climate difference adds to the gap.
How much is metal roof installation in Broken Arrow, OK?
metal roof installation in Broken Arrow runs $12,550–$28,650 as of 2026 — most jobs land near $20,600.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Broken Arrow and Edmond: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Not really — the $250 gap is one-time, and smart timing and tighter quotes in Edmond can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik