Metal Roof Installation cost: Cherry Hill vs Paterson (2026)
The two metros aren't quite in sync on metal roof installation: Cherry Hill sits 9% below Paterson, or roughly $22,700 versus $24,850 — about $2,150 apart.
Cherry Hill NJ
Lower costTypically around $22,700
Paterson NJ
Typically around $24,850
Cherry Hill vs Paterson: full breakdown
| Factor | Cherry Hill | Paterson |
|---|---|---|
| Typical 2026 cost | $22,700 | $24,850 |
| Estimated range | $13,850–$31,550 | $15,150–$34,500 |
| Labor index (vs US) | ×1.04 | ×1.14 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $275 | $325 |
| Labor share | $13,600 | $14,900 |
| Materials/equipment | $9,100 | $9,950 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Is the price difference a dealbreaker?
A 9% gap is meaningful on a project this size — about $2,150. That's real money, but it's often within reach of off-season timing and a tighter apples-to-apples bid in Paterson.
Metal roof installation by type: Cherry Hill vs Paterson
Below, each metal roof installation option is priced independently for both cities, with identical local labor, climate and permit logic applied — so the comparison holds up.
| Type | Cherry Hill | Paterson |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,650–$19,050 | $10,550–$20,800 |
| Standing-seam steel | $19,050–$36,800 | $20,800–$40,200 |
| Aluminum | $14,900–$29,500 | $16,250–$32,200 |
| Copper | $31,550–$62,850 | $34,500–$68,650 |
| Zinc | $29,500–$57,650 | $32,200–$62,950 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Metal roof installation by roof size: Cherry Hill vs Paterson
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Cherry Hill | Paterson |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,600–$16,950 | $9,450–$18,550 |
| 1,500 sq ft (15 squares) | $11,750–$24,250 | $12,850–$26,500 |
| 2,000 sq ft (20 squares) | $13,850–$31,550 | $15,150–$34,500 |
| 2,500 sq ft (25 squares) | $16,950–$37,850 | $18,550–$41,300 |
| 3,000+ sq ft (30 squares) | $20,100–$44,100 | $21,950–$48,150 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
Roughly 60% of what you pay for metal roof installation is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
Philadelphia-Camden-Wilmington metro · about 7% above the US average installer wage.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Cherry Hill vs Paterson
Is metal roof installation cheaper in Cherry Hill or Paterson?
Cherry Hill comes out ahead here, at roughly $22,700 for metal roof installation compared with $24,850 in Paterson — a 9% ($2,150) gap as of 2026.
Why does metal roof installation cost more in Paterson than Cherry Hill?
Paterson's higher labor index (1.14 vs 1.04 in Cherry Hill) is the biggest factor, with the mixed/mixed climate split and permit fee differences playing a smaller role.
How much is metal roof installation in Cherry Hill, NJ?
Cherry Hill homeowners can expect $13,850 to $31,550 for metal roof installation in 2026, with $22,700 the typical number.
Do roofing pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $33.4/hr in Philadelphia-Camden-Wilmington compared with $38.3/hr in New York-Newark-Jersey City (BLS OEWS). Labor is about 60% of a metal roof installation job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Cherry Hill and Paterson: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $2,150 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Paterson can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik