Roofing · Cherry Hill, NJ
How much does metal roof installation cost in Cherry Hill, NJ? (2026)
In Cherry Hill, metal roof installation runs $13,850–$31,550, with most paying around $22,700 — about 6% above the national average. Installing a metal roof — higher upfront cost, long lifespan and strong durability.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $22,700
- Typical cost
- $22,700
- Labor vs US
- +1%
- Climate
- Mixed
- Local permit
- $275
Refine your estimate
Tune it to your home to narrow the metal roof installation range.
Key takeaways for Cherry Hill
- In Cherry Hill, metal roof installation runs $13,850–$31,550 — call it $22,700 for a typical job, about 6% above the national average.
- Cherry Hill labor runs +1% versus the US average — the main reason the local price differs from the national figure.
- Set aside roughly $275 for the permit; that's already part of the range above, not an add-on.
- Expect 40–70 years of service, so planning a replacement beats a full-price emergency call.
- Cheapest time to buy: Late spring to early fall (dry, 45–85°F) — roughly 5–10% off peak-season pricing.
What goes into the price in Cherry Hill
A typical Cherry Hill metal roof installation of $22,700 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Cherry Hill 2026 range |
|---|---|
| Materials & equipmentThe unit and materials — largely the same cost no matter which city you're in. | $5,450 – $12,500 |
| Labor & installationCrew time for removal, installation and startup; local labor rates drive most of the swing here. | $8,125 – $18,775 |
| Permit & feesRoofing permit cost, adjusted to this city's rate. | $275 |
| Total installed cost | $13,850 – $31,550 |
Split from the Cherry Hill estimate using a 60% local-labor share; line items sum to the total.
Why metal roof installation costs what it does in Cherry Hill
- Cherry Hill's labor rates sit about 1% higher than the national average (based on price levels for the Philadelphia-Camden-Wilmington metro area), pushing the price up.
- A Roofing permit in Cherry Hill costs around $275, included above.
Metal Roof Installation cost by roof size in Cherry Hill
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| roof size | Cherry Hill 2026 range |
|---|---|
| 1,000 sq ft (10 squares) | $8,600 – $16,950 |
| 1,500 sq ft (15 squares) | $11,750 – $24,250 |
| 2,000 sq ft (20 squares) | $13,850 – $31,550 |
| 2,500 sq ft (25 squares) | $16,950 – $37,850 |
| 3,000+ sq ft (30 squares) | $20,100 – $44,100 |
National size ranges localized to Cherry Hill labor and climate.
Metal Roof Installation cost by type in Cherry Hill
| Corrugated steel (exposed fastener) | $9,650 – $19,000 |
| Standing-seam steel | $19,000 – $36,700 |
| Aluminum | $14,850 – $29,400 |
| Copper | $31,500 – $62,700 |
| Zinc | $29,400 – $57,500 |
Adjusted to Cherry Hill from national type-level ranges.
Metal Roof Installation cost by efficiency in Cherry Hill
The panel system and metal type set the price. Exposed-fastener panels are the budget option; standing-seam hides the fasteners and lasts longer; specialty metals (copper, zinc) are architectural premiums.
| Exposed-fastener / corrugated steelLowest-cost metal; fasteners need periodic resealing | $8,600 – $19,050 |
| Standing-seam steel or aluminumHidden fasteners, sleek look; the mainstream choice | $13,850 – $31,550 |
| Copper / zinc (specialty)Premium architectural metal; 70+ yr life | $26,350 – $52,450 |
Labor vs. materials in Cherry Hill
Install crew, removal, permit & startup — the part Cherry Hill rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $22,700 Cherry Hill project; your mix varies with scope.
Skilled installers in the Philadelphia-Camden-Wilmington area earn about $33.4/hr (7% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your metal roof installation cost.
How we estimate it
| National range | $13,000 – $30,000 |
| Cherry Hill labor adjustment | ×1.04 |
| mixed climate factor | ×1 |
| Local permit | +$275 |
| Cherry Hill estimate | $13,850 – $31,550 |
Promo prices vs. the real cost
Storm-season ads push low headline prices — confirm scope before you compare:
- Per-square teaser priceadvertised low; varies by pitch & material
- Free roof inspection$0 — it's a sales visit
- Financing offers$0 down · low APR
Additional metal roof installation costs to budget for
These aren't always in the headline price. Whether you'll pay them depends on your home's condition and setup.
| Tear-off & disposal of old roofSkippable if installing over a sound existing roof with furring | $1,000 – $3,000 |
| Decking / sheathing repair | $500 – $3,000 |
| Underlayment (high-temp synthetic) | $400 – $1,500 |
| Custom flashing, trim & ridge capsMore on complex or steep rooflines | $500 – $2,500 |
| Snow guards (in snowy regions) | $300 – $1,500 |
| Permit | $150 – $500 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Metal panels or standing-seam system
- Tear-off of the old roof
- Underlayment, fasteners and trim
- Labor, cleanup and permit
What affects the cost
- Roof complexity and number of penetrations
- Panel type (exposed-fastener vs standing seam)
- Whether existing roof can be overlaid
- Metal: steel, aluminum, copper or zinc
Ways to save on metal roof installation in Cherry Hill
- Compare lifetime cost, not just the install price
- Some insurers discount metal and impact-rated roofs
- Metal's 40–70 yr life lowers lifetime cost
- Steel standing seam balances cost and longevity
How long does metal roof installation last in Cherry Hill?
Steel/aluminum panels last 40–70 years; copper and zinc can exceed 100.
Mostly inspection — checking fasteners, sealant, and flashing; far less hands-on than asphalt.
Signs you need metal roof installation in Cherry Hill
- Loose, backed-out, or corroded fasteners on exposed-fastener panels
- Rust spots, especially at seams, edges, or scratches
- Failed sealant or lifted seams letting water track underneath
- Loose or damaged flashing around chimneys, valleys, and skylights
- Dents or panel deformation after hail or fallen limbs
- Faded or peeling factory finish near the end of its warranty
Repair or replace in Cherry Hill?
Repair if…
- The problem is loose fasteners, worn sealant, or a single damaged panel
- Rust is localized and can be treated and resealed
- Flashing has failed but the panels themselves are sound
Replace if…
- Corrosion or rust-through is widespread across panels
- Panels are heavily dented or deformed beyond repair
- The system is decades old and the protective coating has fully failed
Cost calculator
Roof cost by material in Cherry Hill, NJ
Roofs are priced per square (100 sq ft). An average US home is about 20 squares. Prices are localized to Cherry Hill, NJ labor; the last column is what each material costs per year of life — often the real deciding number.
| Material | Lifespan | Total (20 sq) | Per year of life |
|---|---|---|---|
Architectural asphalt shingle The default US roof — best cost-per-year for most homes. Wind: up to 130 mph. | 25–30 yr | $7,300–$12,500 | $350/yr |
Flat / low-slope (TPO, EPDM) For flat and low-slope roofs; single-ply membrane over the deck. Wind: membrane, fully adhered. | 20–30 yr | $8,300–$16,650 | $500/yr |
Standing-seam metalThis page High upfront cost but the lowest cost-per-year; sheds snow, resists hail and fire. Wind: 140+ mph. | 40–70 yr | $18,700–$33,300 | $450/yr |
Clay / concrete tile Longest-lasting; needs a structure rated for the extra weight. Wind: 125+ mph. | 50–75 yr | $20,800–$41,600 | $500/yr |
Per-square ranges are national installed benchmarks localized to Cherry Hill, NJ labor; lifespan and wind ratings are manufacturer / ASTM figures. A research estimate, not a quote.
Cheapest time for metal roof installation in Cherry Hill
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Why metal roof installation quotes vary — and how to compare them fairly
Two bids for the “same” job can differ by thousands. Usually it's scope, not greed — here's what moves the number and how to get an apples-to-apples comparison.
Why a quote looks high (or low)
- A storm-chaser's lowball often skips flashing, ice-and-water shield or a real warranty.
- One bid is a full tear-off; another lays new shingles over the old roof — cheaper now, costlier later.
- Deck repair, underlayment grade and ventilation may or may not be in the price.
Get an apples-to-apples bid
- Compare the workmanship warranty, not just the material warranty.
- Verify the contractor is licensed, insured and local, with recent references.
- Ask how deck/sheathing repairs are priced if rot is found.
- Confirm underlayment, ice-and-water shield, flashing and ventilation are included.
Questions to ask Cherry Hill Roofing pros
Comparing quotes is only fair when they cover the same scope. Ask every bidder these before you sign.
- 1Is a full tear-off included, or are you laying over the existing roof?
- 2How will you handle deck repairs or rotten sheathing found after tear-off, and at what rate?
- 3What underlayment, ice-and-water shield, and ventilation are included?
- 4Are you licensed and insured here, and can you share recent local references?
- 5What's the workmanship warranty, and how does it interact with the material warranty?
Metal Roof Installation in Cherry Hill
How much does metal roof installation cost in Cherry Hill, NJ?
Expect to pay $13,850 to $31,550 for metal roof installation in Cherry Hill in 2026 — most quotes cluster around $22,700. The figure is adjusted for local labor rates, mixed-climate factors and permit fees.
Is metal roof installation more expensive in Cherry Hill than average?
Labor is the biggest lever here: at an index of 1.04 versus the US average, Cherry Hill ends up about 6% higher than the national average., plus a local Roofing permit running about $275.
Do I need a permit for metal roof installation in Cherry Hill?
Most Cherry Hill jurisdictions require a Roofing permit for this work. Budget roughly $275 for the permit; it is already included in the estimate above.
What affects metal roof installation cost the most?
Installing a metal roof — higher upfront cost, long lifespan and strong durability. Price swings mostly come down to equipment or material grade, the size and complexity of the home, local labor, and the mixed climate zone.
Where does a smart roofing budget go in 2026?
Roofing budgets swing on decisions most homeowners don't think to ask about — overlay vs. tear-off, shingle tier, deck condition. Our editors break down each one.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
Insist on tear-off over overlay, get the deck-repair rate in writing before work starts, and lean toward architectural shingles. Skipping any of the three tends to cost more later than it saves now.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national metal roof installation ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Cherry Hill using the BLS metro wage data labor index (×1.04 here), the IECC mixed-climate factor (×1) and a typical local permit fee (≈$275). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Cherry Hill metal roof installation estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Metal roof installation alternatives in Cherry Hill
Homeowners in Cherry Hill often pair this with
A metal roof installation rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Cherry Hill
Browse local 2026 costs for every home project in Cherry Hill, NJ.