Metal Roof Installation cost: Cherry Hill vs Jersey City (2026)
In 2026, metal roof installation is about 9% less expensive in Cherry Hill than in Jersey City. Most homeowners pay around $22,700 in Cherry Hill versus $24,850 in Jersey City — a gap of roughly $2,150.
Cherry Hill NJ
Lower costTypically around $22,700
Jersey City NJ
Typically around $24,850
Cherry Hill vs Jersey City: full breakdown
| Factor | Cherry Hill | Jersey City |
|---|---|---|
| Typical 2026 cost | $22,700 | $24,850 |
| Estimated range | $13,850–$31,550 | $15,150–$34,500 |
| Labor index (vs US) | ×1.04 | ×1.14 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $275 | $325 |
| Labor share | $13,600 | $14,900 |
| Materials/equipment | $9,100 | $9,950 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
Is the gap worth worrying about?
That's a real $2,150 difference (9%) on metal roof installation — worth factoring in, though off-season timing and a tighter quote in Jersey City can narrow it.
Metal roof installation by type: Cherry Hill vs Jersey City
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Cherry Hill | Jersey City |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,650–$19,050 | $10,550–$20,800 |
| Standing-seam steel | $19,050–$36,800 | $20,800–$40,200 |
| Aluminum | $14,900–$29,500 | $16,250–$32,200 |
| Copper | $31,550–$62,850 | $34,500–$68,650 |
| Zinc | $29,500–$57,650 | $32,200–$62,950 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Cherry Hill vs Jersey City
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Cherry Hill | Jersey City |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,600–$16,950 | $9,450–$18,550 |
| 1,500 sq ft (15 squares) | $11,750–$24,250 | $12,850–$26,500 |
| 2,000 sq ft (20 squares) | $13,850–$31,550 | $15,150–$34,500 |
| 2,500 sq ft (25 squares) | $16,950–$37,850 | $18,550–$41,300 |
| 3,000+ sq ft (30 squares) | $20,100–$44,100 | $21,950–$48,150 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Philadelphia-Camden-Wilmington metro · about 7% above the US average installer wage.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Roofers are slammed the moment warm weather returns, especially after storms. Get on their books in the off-season for a spring job and you're negotiating with an empty calendar, not a waiting list.
Where does a smart roofing budget go in 2026?
The real cost of a roof comes down to three decisions: tear-off or overlay, which shingle tier, and what condition the decking is in. Our editors weigh in.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Cherry Hill vs Jersey City
Is metal roof installation cheaper in Cherry Hill or Jersey City?
Cherry Hill comes out ahead here, at roughly $22,700 for metal roof installation compared with $24,850 in Jersey City — a 9% ($2,150) gap as of 2026.
Why does metal roof installation cost more in Jersey City than Cherry Hill?
The main driver is local labor rates: Jersey City's labor index is 1.14 versus 1.04 in Cherry Hill. Climate zone (mixed vs mixed) and permit fees also shift the total.
How much is metal roof installation in Cherry Hill, NJ?
In Cherry Hill, metal roof installation typically runs $13,850–$31,550 in 2026, with most homeowners paying around $22,700.
Do roofing pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $33.4/hr in Philadelphia-Camden-Wilmington compared with $38.3/hr in New York-Newark-Jersey City (BLS OEWS). Labor is about 60% of a metal roof installation job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Cherry Hill and Jersey City: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
That would be a stretch. $2,150 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Jersey City can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik