Metal Roof Installation cost: Cherry Hill vs Newark (2026)
Budget-wise, metal roof installation in Cherry Hill ($22,700) runs 9% less than in Newark ($24,850), a roughly $2,150 spread.
Cherry Hill NJ
Lower costTypically around $22,700
Newark NJ
Typically around $24,850
Cherry Hill vs Newark: full breakdown
| Factor | Cherry Hill | Newark |
|---|---|---|
| Typical 2026 cost | $22,700 | $24,850 |
| Estimated range | $13,850–$31,550 | $15,150–$34,500 |
| Labor index (vs US) | ×1.04 | ×1.14 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $275 | $325 |
| Labor share | $13,600 | $14,900 |
| Materials/equipment | $9,100 | $9,950 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
Is the gap worth worrying about?
That's a real $2,150 difference (9%) on metal roof installation — worth factoring in, though off-season timing and a tighter quote in Newark can narrow it.
Metal roof installation by type: Cherry Hill vs Newark
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Cherry Hill | Newark |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,650–$19,050 | $10,550–$20,800 |
| Standing-seam steel | $19,050–$36,800 | $20,800–$40,200 |
| Aluminum | $14,900–$29,500 | $16,250–$32,200 |
| Copper | $31,550–$62,850 | $34,500–$68,650 |
| Zinc | $29,500–$57,650 | $32,200–$62,950 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Cherry Hill vs Newark
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Cherry Hill | Newark |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,600–$16,950 | $9,450–$18,550 |
| 1,500 sq ft (15 squares) | $11,750–$24,250 | $12,850–$26,500 |
| 2,000 sq ft (20 squares) | $13,850–$31,550 | $15,150–$34,500 |
| 2,500 sq ft (25 squares) | $16,950–$37,850 | $18,550–$41,300 |
| 3,000+ sq ft (30 squares) | $20,100–$44,100 | $21,950–$48,150 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
What roofing pros earn in each metro
Labor is about 60% of a metal roof installation bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Philadelphia-Camden-Wilmington metro · about 7% above the US average installer wage.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
The material dictates the season (shingles need warmth to seal), but the price is set by demand, and demand spikes after every regional hailstorm. Booking your spot in the quiet winter months for spring work avoids that spike.
Where does a smart roofing budget go in 2026?
Tear-off vs. overlay, shingle tier and what's hidden under the deck decide the real number. Our editors on the trade-offs.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The risk case
Budget for the unknown: rotten decking found at tear-off is the most common surprise. Get the per-sheet repair rate in writing up front so a "cheap" bid doesn't balloon mid-job.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Cherry Hill vs Newark
Is metal roof installation cheaper in Cherry Hill or Newark?
Cherry Hill comes out ahead here, at roughly $22,700 for metal roof installation compared with $24,850 in Newark — a 9% ($2,150) gap as of 2026.
Why does metal roof installation cost more in Newark than Cherry Hill?
The main driver is local labor rates: Newark's labor index is 1.14 versus 1.04 in Cherry Hill. Climate zone (mixed vs mixed) and permit fees also shift the total.
How much is metal roof installation in Cherry Hill, NJ?
metal roof installation in Cherry Hill runs $13,850–$31,550 as of 2026 — most jobs land near $22,700.
Do roofing pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $33.4/hr in the Philadelphia-Camden-Wilmington area versus $38.3/hr around New York-Newark-Jersey City (BLS metro wage data). Since labor is roughly 60% of a metal roof installation job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy metal roof installation — and does it differ by city?
No, the seasonal pattern is the same in Cherry Hill and Newark: book during Late spring to early fall (dry, 45–85°F) for about 5–10% in savings. Mid-winter and the post-storm rush is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on metal roof installation cost?
Not really — the $2,150 gap is one-time, and smart timing and tighter quotes in Newark can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik