Metal Roof Installation cost: Beaverton vs Salem (2026)
In 2026, metal roof installation is about 4% more expensive in Beaverton than in Salem. Most homeowners pay around $23,400 in Beaverton versus $22,450 in Salem — a gap of roughly $950.
Beaverton OR
Typically around $23,400
Salem OR
Lower costTypically around $22,450
Beaverton vs Salem: full breakdown
| Factor | Beaverton | Salem |
|---|---|---|
| Typical 2026 cost | $23,400 | $22,450 |
| Estimated range | $14,250–$32,500 | $13,700–$31,200 |
| Labor index (vs US) | ×1.07 | ×1.03 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $300 |
| Labor share | $14,050 | $13,450 |
| Materials/equipment | $9,350 | $9,000 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
How much should this gap actually matter?
That 4% gap is small — for metal roof installation it's usually less than the spread between two local contractors' quotes, so the metro matters far less than who you hire and when you buy.
Metal roof installation by type: Beaverton vs Salem
We localize each metal roof installation type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Beaverton | Salem |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,950–$19,600 | $9,550–$18,850 |
| Standing-seam steel | $19,600–$37,850 | $18,850–$36,350 |
| Aluminum | $15,300–$30,350 | $14,700–$29,150 |
| Copper | $32,500–$64,700 | $31,200–$62,100 |
| Zinc | $30,350–$59,350 | $29,150–$56,950 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national metal roof installation range for local labor, climate and permits.
Metal roof installation by roof size: Beaverton vs Salem
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Beaverton | Salem |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,900–$17,450 | $8,550–$16,800 |
| 1,500 sq ft (15 squares) | $12,100–$25,000 | $11,650–$24,000 |
| 2,000 sq ft (20 squares) | $14,250–$32,500 | $13,700–$31,200 |
| 2,500 sq ft (25 squares) | $17,450–$38,950 | $16,800–$37,400 |
| 3,000+ sq ft (30 squares) | $20,700–$45,350 | $19,850–$43,550 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
What roofing pros earn in each metro
Since labor accounts for around 60% of what a metal roof installation job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
No BLS metro wage series for Salem; we use Oregon regional price parity instead.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
A roofing quote can hide a lot behind a single number — whether it's a true tear-off, the shingle grade, and what's under the surface. Here's how our editors sort through it.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
Whatever the headline bid says, the roof that lasts is the one installed on a bare, sound deck with the repair price fixed in advance. Overlays and open-ended decking charges are where a cheap quote turns expensive down the line.
Beaverton vs Salem
Is metal roof installation cheaper in Beaverton or Salem?
Salem wins on price: metal roof installation runs about $22,450 there versus $23,400 in Beaverton, a gap of roughly $950 (4%) as of 2026.
Why does metal roof installation cost more in Beaverton than Salem?
Labor rates explain most of it — 1.07 in Beaverton vs 1.03 in Salem. A mixed climate versus mixed accounts for the rest.
How much is metal roof installation in Beaverton, OR?
Expect to pay $14,250 to $32,500 for metal roof installation in Beaverton in 2026, averaging around $23,400.
When is the cheapest time to buy metal roof installation — and does it differ by city?
The best window is the same in both Beaverton and Salem: Late spring to early fall (dry, 45–85°F), when demand drops and installers discount to keep crews busy — typically 5–10% off peak pricing. The most expensive time anywhere is an emergency replacement during mid-winter and the post-storm rush.
Should I choose where to live based on metal roof installation cost?
Not really — the $950 gap is one-time, and smart timing and tighter quotes in Beaverton can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik