Metal Roof Installation cost: Beaverton vs Hillsboro (2026)
Beaverton and Hillsboro are a near-perfect match on metal roof installation cost in 2026, both landing around $23,400.
Beaverton OR
Typically around $23,400
Hillsboro OR
Typically around $23,400
Beaverton vs Hillsboro: full breakdown
| Factor | Beaverton | Hillsboro |
|---|---|---|
| Typical 2026 cost | $23,400 | $23,400 |
| Estimated range | $14,250–$32,500 | $14,250–$32,500 |
| Labor index (vs US) | ×1.07 | ×1.07 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $300 |
| Labor share | $14,050 | $14,050 |
| Materials/equipment | $9,350 | $9,350 |
Treat these as 2026 localized estimates for metal roof installation, not quotes from a contractor.
No real cost edge either way
With no real price gap on metal roof installation, the choice comes down to contractor quality and timing, not which city you're in.
Metal roof installation by type: Beaverton vs Hillsboro
Each metal roof installation option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Beaverton | Hillsboro |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,950–$19,600 | $9,950–$19,600 |
| Standing-seam steel | $19,600–$37,850 | $19,600–$37,850 |
| Aluminum | $15,300–$30,350 | $15,300–$30,350 |
| Copper | $32,500–$64,700 | $32,500–$64,700 |
| Zinc | $30,350–$59,350 | $30,350–$59,350 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Beaverton vs Hillsboro
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Beaverton | Hillsboro |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,900–$17,450 | $8,900–$17,450 |
| 1,500 sq ft (15 squares) | $12,100–$25,000 | $12,100–$25,000 |
| 2,000 sq ft (20 squares) | $14,250–$32,500 | $14,250–$32,500 |
| 2,500 sq ft (25 squares) | $17,450–$38,950 | $17,450–$38,950 |
| 3,000+ sq ft (30 squares) | $20,700–$45,350 | $20,700–$45,350 |
These are 2026 planning figures for metal roof installation, localized to each city — not formal quotes.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Shingles need warm, dry weather to seal, and demand peaks after summer storms. Booking in the slow late-fall/winter window for a spring install often earns you off-season pricing.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The do-it-right case
A full tear-off lets the crew replace underlayment, flashing and ventilation while the deck is exposed — the layers that actually keep water out. Covering old shingles with new ones costs less on install day, but the trapped heat shortens shingle life, and many manufacturers won't honor a warranty on an overlay.
The value case
Architectural shingles sit between bargain 3-tab and premium metal or tile, and for most houses that middle ground is exactly right. They carry longer wind and wear ratings than 3-tab for a small step up in price, without the four-figure jump metal or tile demands.
A roof's real cost shows up over its lifespan, not on install day. Tear-off, a documented repair rate and a mid-tier shingle grade are what keep that lifetime cost in check.
Beaverton vs Hillsboro
Is metal roof installation cheaper in Beaverton or Hillsboro?
Practically identical — expect around $23,400 for metal roof installation whichever city you're in.
Why does metal roof installation cost more in Hillsboro than Beaverton?
The main driver is local labor rates: Hillsboro's labor index is 1.07 versus 1.07 in Beaverton. Climate zone (mixed vs mixed) also shift the total.
How much is metal roof installation in Beaverton, OR?
metal roof installation in Beaverton runs $14,250–$32,500 as of 2026 — most jobs land near $23,400.
Do roofing pros really charge more in one city?
Real wage data backs this up — skilled installers earn roughly $34.9/hr in Portland-Vancouver-Hillsboro compared with $34.9/hr in Portland-Vancouver-Hillsboro (BLS OEWS). Labor is about 60% of a metal roof installation job, so that wage gap is what mostly drives the price difference.
When is the cheapest time to buy metal roof installation — and does it differ by city?
It doesn't vary by location — Late spring to early fall (dry, 45–85°F) is the discount window in both Beaverton and Hillsboro (roughly 5–10% off), while mid-winter and the post-storm rush tends to be the most expensive in either city.
Should I choose where to live based on metal roof installation cost?
No — the cost is essentially identical between Beaverton and Hillsboro. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik