Metal Roof Installation cost: Beaverton vs Portland (2026)
There's essentially no price gap here: metal roof installation runs close to $23,400 in both Beaverton and Portland in 2026.
Beaverton OR
Typically around $23,400
Portland OR
Typically around $23,400
Beaverton vs Portland: full breakdown
| Factor | Beaverton | Portland |
|---|---|---|
| Typical 2026 cost | $23,400 | $23,400 |
| Estimated range | $14,250–$32,500 | $14,250–$32,500 |
| Labor index (vs US) | ×1.07 | ×1.07 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $300 | $300 |
| Labor share | $14,050 | $14,050 |
| Materials/equipment | $9,350 | $9,350 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
A wash — choose on quality, not city
This is a statistical tie on metal roof installation cost, so let contractor reputation and project timing decide, not geography.
Metal roof installation by type: Beaverton vs Portland
Every metal roof installation type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Beaverton | Portland |
|---|---|---|
| Corrugated steel (exposed fastener) | $9,950–$19,600 | $9,950–$19,600 |
| Standing-seam steel | $19,600–$37,850 | $19,600–$37,850 |
| Aluminum | $15,300–$30,350 | $15,300–$30,350 |
| Copper | $32,500–$64,700 | $32,500–$64,700 |
| Zinc | $30,350–$59,350 | $30,350–$59,350 |
All figures are 2026 localized planning estimates for metal roof installation — get an actual quote before you commit.
Metal roof installation by roof size: Beaverton vs Portland
Metal roofing is priced per square (100 sq ft) and costs roughly $6–$14 per sq ft installed — two to three times asphalt, but it lasts decades longer. Standing-seam costs more than exposed-fastener panels.
| Size | Beaverton | Portland |
|---|---|---|
| 1,000 sq ft (10 squares) | $8,900–$17,450 | $8,900–$17,450 |
| 1,500 sq ft (15 squares) | $12,100–$25,000 | $12,100–$25,000 |
| 2,000 sq ft (20 squares) | $14,250–$32,500 | $14,250–$32,500 |
| 2,500 sq ft (25 squares) | $17,450–$38,950 | $17,450–$38,950 |
| 3,000+ sq ft (30 squares) | $20,700–$45,350 | $20,700–$45,350 |
Metal roof installation numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What roofing pros earn in each metro
About 60% of a metal roof installation bill goes to labor, so wage differences between these two metros matter more than almost anything else. These are real, government-sourced (BLS OEWS) installer wages, not estimates.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Portland-Vancouver-Hillsboro metro · about 12% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for metal roof installation in either city
Why summer costs more: it's the only stretch shingles seal reliably, so every storm-damaged roof in the region is competing for the same crews. Reserve a spring slot during the slow winter season and you're not in that queue.
Where does a smart roofing budget go in 2026?
Two roofs of the same square footage can price hundreds apart because of something you can't see from the ground — the deck under the old shingles. Add the tear-off-versus-overlay call and the shingle grade, and you have the decisions that actually move the number.
The risk case
Nail down the per-sheet decking rate in writing before anyone climbs up. Soft or rotted plywood is the most common mid-job discovery, and without an agreed number the crew names the price after they've already found the damage — turning a cheap quote into an open tab.
The do-it-right case
Pay for a full tear-off and quality underlayment, flashing and ventilation. An overlay saves money today but traps heat, voids some warranties and costs more at the next replacement.
The value case
Architectural shingles hit the sweet spot — far more durable than 3-tab for a modest premium, and far cheaper than metal or tile. For most homes they're the right default.
The two things that actually protect a roofing budget are a real tear-off and a written rate for any deck repairs found along the way. The cheapest post-storm bid usually isn't the cheapest roof, long-term.
Beaverton vs Portland
Is metal roof installation cheaper in Beaverton or Portland?
Not really — both cities land at almost the same number for metal roof installation, around $23,400 each.
Why does metal roof installation cost more in Portland than Beaverton?
Portland's higher labor index (1.07 vs 1.07 in Beaverton) is the biggest factor, with the mixed/mixed climate split playing a smaller role.
How much is metal roof installation in Beaverton, OR?
metal roof installation in Beaverton runs $14,250–$32,500 as of 2026 — most jobs land near $23,400.
Do roofing pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $34.9/hr in the Portland-Vancouver-Hillsboro area and $34.9/hr in Portland-Vancouver-Hillsboro. Given labor is around 60% of a metal roof installation job's cost, that gap explains most of the price spread.
When is the cheapest time to buy metal roof installation — and does it differ by city?
Timing doesn't change by city here — Late spring to early fall (dry, 45–85°F) is the cheapest window in both Beaverton and Portland, saving roughly 5–10%. Avoid mid-winter and the post-storm rush in either location, when emergency replacements push prices up.
Should I choose where to live based on metal roof installation cost?
No — the cost is essentially identical between Beaverton and Portland. Base the decision on the things that actually vary: contractor reputation, scope, equipment tier and timing.
Compare metal roof installation in other cities
Updated June 2026 · By Serhat Özçelik