Furnace Replacement cost: Edmonds vs Seattle (2026)
Edmonds and Seattle are a near-perfect match on furnace replacement cost in 2026, both landing around $6,700.
Edmonds WA
Typically around $6,700
Seattle WA
Typically around $6,700
Edmonds vs Seattle: full breakdown
| Factor | Edmonds | Seattle |
|---|---|---|
| Typical 2026 cost | $6,700 | $6,700 |
| Estimated range | $4,800–$8,600 | $4,800–$8,600 |
| Labor index (vs US) | ×1.19 | ×1.19 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $4,000 | $4,000 |
| Materials/equipment | $2,700 | $2,700 |
These are 2026 planning figures for furnace replacement, localized to each city — not formal quotes.
Basically a tie — focus on the contractor
The two metros are effectively a wash for furnace replacement — pick on contractor quality and timing, not location.
Furnace replacement by type: Edmonds vs Seattle
Each furnace replacement option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Edmonds | Seattle |
|---|---|---|
| Gas furnace | $4,650–$8,450 | $4,650–$8,450 |
| High-efficiency gas furnace | $4,200–$8,450 | $4,200–$8,450 |
| Electric furnace | $2,650–$5,600 | $2,650–$5,600 |
All figures are 2026 localized planning estimates for furnace replacement — get an actual quote before you commit.
Furnace replacement by home size: Edmonds vs Seattle
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Edmonds | Seattle |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,600–$6,450 | $3,600–$6,450 |
| 1,500 sq ft (≈68,000 BTU) | $4,200–$7,400 | $4,200–$7,400 |
| 2,000 sq ft (≈90,000 BTU) | $4,800–$8,600 | $4,800–$8,600 |
| 2,500 sq ft (≈110,000 BTU) | $5,500–$9,800 | $5,500–$9,800 |
| 3,000 sq ft (≈130,000 BTU) | $6,200–$10,950 | $6,200–$10,950 |
| 3,500+ sq ft (≈150,000 BTU) | $6,900–$12,150 | $6,900–$12,150 |
All figures are 2026 localized planning estimates for furnace replacement — get an actual quote before you commit.
What hvac pros earn in each metro
Labor is about 60% of a furnace replacement bill, so local wages drive most of the gap. These are real metro hourly wages for skilled installers (BLS OEWS), not estimates.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
HVAC demand collapses in the mild shoulder seasons, so installers discount to keep crews busy. The most expensive time to buy is during a heat wave or cold snap, when a dead system forces a full-price emergency replacement.
How much should you really budget for HVAC in 2026?
Sizing, efficiency tier and brand pull a quote in different directions. Here's how our editors weigh the trade-offs that decide what you actually pay.
The longevity case
The most expensive variable on the quote isn't the logo — it's whether the system is sized right and installed well. Oversize a premium unit and it short-cycles, wears fast and underperforms; commission a correctly sized mid-tier one and keep up the annual service, and it simply lasts longer. Spend on the installation, not the badge.
The efficiency-first case
High runtime changes the math. In a demanding climate the extra efficiency of a heat pump or a top-tier SEER2/AFUE unit gets paid back month after month on the utility bill, and state and utility incentives can shave the upfront figure further now that the federal 25C/25D credits have expired. Price the lifetime bills, not just the tag, before you default down.
The budget-first case
Run a Manual J load calculation, then buy the standard tier — 80% AFUE, 14.3 SEER2 — and stop there. Where summers are short and winters are gentle, the equipment idles most of the year, so premium efficiency never gets enough runtime to earn back its price. Paying for SEER2 you'll rarely tap is the classic way a mild-climate homeowner overspends.
Match the efficiency tier to your climate, insist on a real load calculation, and stack every rebate you qualify for. The expensive mistakes are wrong sizing and a rushed install — not picking the "wrong" brand.
Edmonds vs Seattle
Is furnace replacement cheaper in Edmonds or Seattle?
There's no meaningful difference: furnace replacement runs about $6,700 in both places.
Why does furnace replacement cost more in Seattle than Edmonds?
The main driver is local labor rates: Seattle's labor index is 1.19 versus 1.19 in Edmonds. Climate zone (mixed vs mixed) also shift the total.
How much is furnace replacement in Edmonds, WA?
In Edmonds, furnace replacement typically runs $4,800–$8,600 in 2026, with most homeowners paying around $6,700.
Do hvac pros really charge more in one city?
It's not a myth — BLS data puts installer wages at about $41.1/hr in the Seattle-Tacoma-Bellevue area and $41.1/hr in Seattle-Tacoma-Bellevue. Given labor is around 60% of a furnace replacement job's cost, that gap explains most of the price spread.
When is the cheapest time to buy furnace replacement — and does it differ by city?
No, the seasonal pattern is the same in Edmonds and Seattle: book during Spring and fall (Mar–May, Sep–Oct) for about 5–15% in savings. Peak summer and mid-winter is the priciest stretch in both cities, mostly due to emergency replacements.
Should I choose where to live based on furnace replacement cost?
Cost shouldn't be the deciding factor between Edmonds and Seattle — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik