Furnace Replacement cost: Bellevue vs Edmonds (2026)
Furnace replacement costs about the same in Bellevue and Edmonds in 2026 — roughly $6,700 in each.
Bellevue WA
Typically around $6,700
Edmonds WA
Typically around $6,700
Bellevue vs Edmonds: full breakdown
| Factor | Bellevue | Edmonds |
|---|---|---|
| Typical 2026 cost | $6,700 | $6,700 |
| Estimated range | $4,800–$8,600 | $4,800–$8,600 |
| Labor index (vs US) | ×1.19 | ×1.19 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $250 | $250 |
| Labor share | $4,000 | $4,000 |
| Materials/equipment | $2,700 | $2,700 |
These are 2026 planning figures for furnace replacement, localized to each city — not formal quotes.
Basically a tie — focus on the contractor
With no real price gap on furnace replacement, the choice comes down to contractor quality and timing, not which city you're in.
Furnace replacement by type: Bellevue vs Edmonds
We localize each furnace replacement type separately for both metros, applying the same labor, climate and permit adjustments each time, so you're comparing like for like.
| Type | Bellevue | Edmonds |
|---|---|---|
| Gas furnace | $4,650–$8,450 | $4,650–$8,450 |
| High-efficiency gas furnace | $4,200–$8,450 | $4,200–$8,450 |
| Electric furnace | $2,650–$5,600 | $2,650–$5,600 |
These are 2026 planning figures for furnace replacement, localized to each city — not formal quotes.
Furnace replacement by home size: Bellevue vs Edmonds
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Bellevue | Edmonds |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,600–$6,450 | $3,600–$6,450 |
| 1,500 sq ft (≈68,000 BTU) | $4,200–$7,400 | $4,200–$7,400 |
| 2,000 sq ft (≈90,000 BTU) | $4,800–$8,600 | $4,800–$8,600 |
| 2,500 sq ft (≈110,000 BTU) | $5,500–$9,800 | $5,500–$9,800 |
| 3,000 sq ft (≈130,000 BTU) | $6,200–$10,950 | $6,200–$10,950 |
| 3,500+ sq ft (≈150,000 BTU) | $6,900–$12,150 | $6,900–$12,150 |
All figures are 2026 localized planning estimates for furnace replacement — get an actual quote before you commit.
What hvac pros earn in each metro
Since labor accounts for around 60% of what a furnace replacement job costs, it's the biggest lever behind any price gap between cities. What you're seeing below is actual BLS metro wage data for skilled installers — not a guess.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
Seattle-Tacoma-Bellevue metro · about 32% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
Why spring and fall are cheaper: contractors have open calendar space and compete harder for the work. Why summer and deep winter are expensive: a broken system in extreme weather isn't optional, so you lose your negotiating leverage.
How much should you really budget for HVAC in 2026?
An HVAC budget isn't one number — it's a set of trade-offs between sizing accuracy, efficiency tier and brand. Our editors walk through how each one moves the price.
The efficiency-first case
In a hot-summer or cold-winter region, a higher SEER2/AFUE unit — or a heat pump — earns its premium back in lower bills, and utility and state rebates can still cut into the sticker (the federal 25C/25D credits ended Dec 2025). Run the payback math before defaulting to the cheapest box.
The longevity case
Brand is a footnote; sizing and install quality write the story. A right-sized mid-tier system that's properly commissioned and serviced once a year will outlive an oversized premium unit that short-cycles itself to an early grave. Put the money into the crew and the setup rather than the nameplate.
The budget-first case
In a temperate region the smart move is to size the job correctly with a Manual J and take the base efficiency tier. A system that spends most days coasting can't recover the cost of a high-SEER2 compressor, because the savings only show up under heavy load you don't put on it. Match the equipment to how little you actually run it, not to the brochure's top number.
Get the sizing and the commissioning right and the brand debate mostly disappears. Insist on a Manual J, pick an efficiency tier your climate can justify, and pocket every incentive that still applies after the federal credits lapsed.
Bellevue vs Edmonds
Is furnace replacement cheaper in Bellevue or Edmonds?
There's no meaningful difference: furnace replacement runs about $6,700 in both places.
Why does furnace replacement cost more in Edmonds than Bellevue?
It comes down to labor: Edmonds indexes at 1.19 against Bellevue's 1.19. The mixed-vs-mixed climate difference adds to the gap.
How much is furnace replacement in Bellevue, WA?
In Bellevue, furnace replacement typically runs $4,800–$8,600 in 2026, with most homeowners paying around $6,700.
Do hvac pros really charge more in one city?
Yes — and the wage data shows it. A skilled installer earns about $41.1/hr in the Seattle-Tacoma-Bellevue area versus $41.1/hr around Seattle-Tacoma-Bellevue (BLS metro wage data). Since labor is roughly 60% of a furnace replacement job, that wage gap is the biggest reason the installed prices differ.
When is the cheapest time to buy furnace replacement — and does it differ by city?
The best window is the same in both Bellevue and Edmonds: Spring and fall (Mar–May, Sep–Oct), when demand drops and installers discount to keep crews busy — typically 5–15% off peak pricing. The most expensive time anywhere is an emergency replacement during peak summer and mid-winter.
Should I choose where to live based on furnace replacement cost?
Not on this basis — Bellevue and Edmonds cost about the same. Weigh contractor quality, scope, equipment tier and timing instead.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik