Furnace Replacement cost: Brick vs Newark (2026)
Brick runs 13% lower than Newark for furnace replacement — expect around $5,650 in Brick against $6,400 in Newark, a difference of about $750.
Brick NJ
Lower costTypically around $5,650
Newark NJ
Typically around $6,400
Brick vs Newark: full breakdown
| Factor | Brick | Newark |
|---|---|---|
| Typical 2026 cost | $5,650 | $6,400 |
| Estimated range | $4,050–$7,250 | $4,600–$8,200 |
| Labor index (vs US) | ×1.01 | ×1.14 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $225 | $250 |
| Labor share | $3,400 | $3,850 |
| Materials/equipment | $2,250 | $2,550 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national furnace replacement range for local labor, climate and permits.
Is the gap worth worrying about?
That's a real $750 difference (13%) on furnace replacement — worth factoring in, though off-season timing and a tighter quote in Newark can narrow it.
Furnace replacement by type: Brick vs Newark
Each furnace replacement option, priced separately for both metros — the same local labor, climate and permit adjustments applied per city, so you can compare like for like.
| Type | Brick | Newark |
|---|---|---|
| Gas furnace | $3,950–$7,150 | $4,450–$8,100 |
| High-efficiency gas furnace | $3,550–$7,150 | $4,000–$8,100 |
| Electric furnace | $2,250–$4,750 | $2,550–$5,350 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
Furnace replacement by home size: Brick vs Newark
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Brick | Newark |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,050–$5,450 | $3,450–$6,150 |
| 1,500 sq ft (≈68,000 BTU) | $3,550–$6,250 | $4,000–$7,100 |
| 2,000 sq ft (≈90,000 BTU) | $4,050–$7,250 | $4,600–$8,200 |
| 2,500 sq ft (≈110,000 BTU) | $4,650–$8,250 | $5,250–$9,350 |
| 3,000 sq ft (≈130,000 BTU) | $5,250–$9,300 | $5,950–$10,500 |
| 3,500+ sq ft (≈150,000 BTU) | $5,850–$10,300 | $6,650–$11,650 |
Furnace replacement numbers here are 2026 planning ranges, adjusted per city — useful for budgeting, not a substitute for an actual quote.
What hvac pros earn in each metro
Roughly 60% of what you pay for furnace replacement is labor, which is why local wages explain most of the price gap. The numbers below are actual metro wages for skilled installers, sourced from BLS OEWS — not guesses.
No BLS metro wage series for Brick; we use New Jersey regional price parity instead.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
A furnace or AC that dies mid-heat-wave gets replaced at whatever the on-call crew charges. One that gets swapped in April or October gets a competitive, unhurried quote instead.
How much should you really budget for HVAC in 2026?
Ask five contractors for an HVAC quote and you'll get five different numbers — usually because they disagree on sizing, efficiency and equipment tier. Here's how our editors think through those trade-offs.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
The efficiency-first case
In a hot-summer or cold-winter region, a higher SEER2/AFUE unit — or a heat pump — earns its premium back in lower bills, and utility and state rebates can still cut into the sticker (the federal 25C/25D credits ended Dec 2025). Run the payback math before defaulting to the cheapest box.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
If there's one takeaway, it's this: sizing and install quality decide whether an HVAC system performs, not the badge on the box. Get the load calculation right, match efficiency to climate, and take the rebates on offer.
Brick vs Newark
Is furnace replacement cheaper in Brick or Newark?
Brick wins on price: furnace replacement runs about $5,650 there versus $6,400 in Newark, a gap of roughly $750 (13%) as of 2026.
Why does furnace replacement cost more in Newark than Brick?
It comes down to labor: Newark indexes at 1.14 against Brick's 1.01. The mixed-vs-mixed climate difference, plus permit fees, adds to the gap.
How much is furnace replacement in Brick, NJ?
Brick homeowners can expect $4,050 to $7,250 for furnace replacement in 2026, with $5,650 the typical number.
When is the cheapest time to buy furnace replacement — and does it differ by city?
It doesn't vary by location — Spring and fall (Mar–May, Sep–Oct) is the discount window in both Brick and Newark (roughly 5–15% off), while peak summer and mid-winter tends to be the most expensive in either city.
Should I choose where to live based on furnace replacement cost?
That would be a stretch. $750 is a one-time difference, not an ongoing one, and off-season buying plus apples-to-apples bids in Newark can close a good chunk of it. What matters more long-term is energy costs, climate and the condition of the home.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik