Furnace Replacement cost: Brick vs Elizabeth (2026)
Brick runs 13% lower than Elizabeth for furnace replacement — expect around $5,650 in Brick against $6,400 in Elizabeth, a difference of about $750.
Brick NJ
Lower costTypically around $5,650
Elizabeth NJ
Typically around $6,400
Brick vs Elizabeth: full breakdown
| Factor | Brick | Elizabeth |
|---|---|---|
| Typical 2026 cost | $5,650 | $6,400 |
| Estimated range | $4,050–$7,250 | $4,600–$8,200 |
| Labor index (vs US) | ×1.01 | ×1.14 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $225 | $250 |
| Labor share | $3,400 | $3,850 |
| Materials/equipment | $2,250 | $2,550 |
Treat these as 2026 localized estimates for furnace replacement, not quotes from a contractor.
Is the price difference a dealbreaker?
A 13% spread (roughly $750) is significant enough to plan around, but not fixed — off-peak timing and sharper bidding in Elizabeth typically recover some of it.
Furnace replacement by type: Brick vs Elizabeth
Every furnace replacement type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Brick | Elizabeth |
|---|---|---|
| Gas furnace | $3,950–$7,150 | $4,450–$8,100 |
| High-efficiency gas furnace | $3,550–$7,150 | $4,000–$8,100 |
| Electric furnace | $2,250–$4,750 | $2,550–$5,350 |
These are 2026 planning figures for furnace replacement, localized to each city — not formal quotes.
Furnace replacement by home size: Brick vs Elizabeth
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Brick | Elizabeth |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,050–$5,450 | $3,450–$6,150 |
| 1,500 sq ft (≈68,000 BTU) | $3,550–$6,250 | $4,000–$7,100 |
| 2,000 sq ft (≈90,000 BTU) | $4,050–$7,250 | $4,600–$8,200 |
| 2,500 sq ft (≈110,000 BTU) | $4,650–$8,250 | $5,250–$9,350 |
| 3,000 sq ft (≈130,000 BTU) | $5,250–$9,300 | $5,950–$10,500 |
| 3,500+ sq ft (≈150,000 BTU) | $5,850–$10,300 | $6,650–$11,650 |
Localized 2026 planning estimates — not quotes. Each city adjusts the national furnace replacement range for local labor, climate and permits.
What hvac pros earn in each metro
With labor making up about 60% of a furnace replacement job, wage differences between metros do most of the work here. These figures are real BLS OEWS installer wages, not modeled estimates.
No BLS metro wage series for Brick; we use New Jersey regional price parity instead.
New York-Newark-Jersey City metro · about 23% above the US average installer wage.
Source: U.S. Bureau of Labor Statistics, OEWS metro wages for HVAC installers (used as a trade-labor index).
Cheapest time for furnace replacement in either city
Demand for HVAC work falls off a cliff in the shoulder months, and contractors discount to keep their crews booked. Wait for a 100-degree day or a hard freeze, though, and you're paying emergency rates for a system that just quit.
How much should you really budget for HVAC in 2026?
Three factors move an HVAC quote more than anything else: how well it's sized, which efficiency tier you pick, and the brand markup. Our editors break down how they weigh each one.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
The efficiency-first case
In a hot-summer or cold-winter region, a higher SEER2/AFUE unit — or a heat pump — earns its premium back in lower bills, and utility and state rebates can still cut into the sticker (the federal 25C/25D credits ended Dec 2025). Run the payback math before defaulting to the cheapest box.
Match the efficiency tier to your climate, insist on a real load calculation, and stack every rebate you qualify for. The expensive mistakes are wrong sizing and a rushed install — not picking the "wrong" brand.
Brick vs Elizabeth
Is furnace replacement cheaper in Brick or Elizabeth?
Brick comes out ahead here, at roughly $5,650 for furnace replacement compared with $6,400 in Elizabeth — a 13% ($750) gap as of 2026.
Why does furnace replacement cost more in Elizabeth than Brick?
Elizabeth's higher labor index (1.14 vs 1.01 in Brick) is the biggest factor, with the mixed/mixed climate split and permit fee differences playing a smaller role.
How much is furnace replacement in Brick, NJ?
furnace replacement in Brick runs $4,050–$7,250 as of 2026 — most jobs land near $5,650.
When is the cheapest time to buy furnace replacement — and does it differ by city?
The best window is the same in both Brick and Elizabeth: Spring and fall (Mar–May, Sep–Oct), when demand drops and installers discount to keep crews busy — typically 5–15% off peak pricing. The most expensive time anywhere is an emergency replacement during peak summer and mid-winter.
Should I choose where to live based on furnace replacement cost?
Not really — the $750 gap is one-time, and smart timing and tighter quotes in Elizabeth can shrink it. Factors that compound over time, like energy prices and home condition, deserve more weight than a single upfront difference.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik