Furnace Replacement cost: Brick vs Edison (2026)
There's essentially no price gap here: furnace replacement runs close to $5,650 in both Brick and Edison in 2026.
Brick NJ
Typically around $5,650
Edison NJ
Typically around $5,650
Brick vs Edison: full breakdown
| Factor | Brick | Edison |
|---|---|---|
| Typical 2026 cost | $5,650 | $5,650 |
| Estimated range | $4,050–$7,250 | $4,050–$7,250 |
| Labor index (vs US) | ×1.01 | ×1.01 |
| Climate zone | Mixed | Mixed |
| Climate factor | ×1 | ×1 |
| Local permit | $225 | $225 |
| Labor share | $3,400 | $3,400 |
| Materials/equipment | $2,250 | $2,250 |
All figures are 2026 localized planning estimates for furnace replacement — get an actual quote before you commit.
No real cost edge either way
With no real price gap on furnace replacement, the choice comes down to contractor quality and timing, not which city you're in.
Furnace replacement by type: Brick vs Edison
Every furnace replacement type gets its own localized price for each metro, using the same labor, climate and permit adjustments — a true apples-to-apples comparison.
| Type | Brick | Edison |
|---|---|---|
| Gas furnace | $3,950–$7,150 | $3,950–$7,150 |
| High-efficiency gas furnace | $3,550–$7,150 | $3,550–$7,150 |
| Electric furnace | $2,250–$4,750 | $2,250–$4,750 |
All figures are 2026 localized planning estimates for furnace replacement — get an actual quote before you commit.
Furnace replacement by home size: Brick vs Edison
Furnace cost scales with the heating capacity (BTU) your home needs — roughly 40–45 BTU per square foot in a mixed climate. Larger homes need a bigger unit and more ductwork.
| Size | Brick | Edison |
|---|---|---|
| 1,000 sq ft (≈45,000 BTU) | $3,050–$5,450 | $3,050–$5,450 |
| 1,500 sq ft (≈68,000 BTU) | $3,550–$6,250 | $3,550–$6,250 |
| 2,000 sq ft (≈90,000 BTU) | $4,050–$7,250 | $4,050–$7,250 |
| 2,500 sq ft (≈110,000 BTU) | $4,650–$8,250 | $4,650–$8,250 |
| 3,000 sq ft (≈130,000 BTU) | $5,250–$9,300 | $5,250–$9,300 |
| 3,500+ sq ft (≈150,000 BTU) | $5,850–$10,300 | $5,850–$10,300 |
All figures are 2026 localized planning estimates for furnace replacement — get an actual quote before you commit.
Cheapest time for furnace replacement in either city
Crews are busiest — and priciest — exactly when it's hottest or coldest, since that's when systems fail under load. Book in the mild months and you're negotiating from a position of choice, not a broken furnace.
How much should you really budget for HVAC in 2026?
Sizing, efficiency tier and brand pull a quote in different directions. Here's how our editors weigh the trade-offs that decide what you actually pay.
The efficiency-first case
In a hot-summer or cold-winter region, a higher SEER2/AFUE unit — or a heat pump — earns its premium back in lower bills, and utility and state rebates can still cut into the sticker (the federal 25C/25D credits ended Dec 2025). Run the payback math before defaulting to the cheapest box.
The longevity case
The single biggest cost driver isn't the brand — it's correct sizing and install quality. A properly sized, well-commissioned mid-tier system with annual maintenance outlasts an oversized premium unit that short-cycles. Spend on the install, not the badge.
The budget-first case
Size the system to your home with a Manual J calculation and buy the standard efficiency tier (80% AFUE / 14.3 SEER2). In a mild climate the cheaper unit pays off because you rarely run it hard — paying for premium efficiency you won't use is the most common way to overspend.
Skip the brand debate. A correctly sized system, an efficiency tier that fits your climate, and a properly commissioned install will save you more than any label ever could.
Brick vs Edison
Is furnace replacement cheaper in Brick or Edison?
furnace replacement costs about the same in both — roughly $5,650 in each city.
Why does furnace replacement cost more in Edison than Brick?
It comes down to labor: Edison indexes at 1.01 against Brick's 1.01. The mixed-vs-mixed climate difference adds to the gap.
How much is furnace replacement in Brick, NJ?
furnace replacement in Brick runs $4,050–$7,250 as of 2026 — most jobs land near $5,650.
When is the cheapest time to buy furnace replacement — and does it differ by city?
The best window is the same in both Brick and Edison: Spring and fall (Mar–May, Sep–Oct), when demand drops and installers discount to keep crews busy — typically 5–15% off peak pricing. The most expensive time anywhere is an emergency replacement during peak summer and mid-winter.
Should I choose where to live based on furnace replacement cost?
Cost shouldn't be the deciding factor between Brick and Edison — they land at nearly the same price. Contractor reputation, scope, equipment tier and timing matter more.
Compare furnace replacement in other cities
Updated June 2026 · By Serhat Özçelik