Windows · Revere, MA
How much does wood and fiberglass window replacement cost in Revere, MA? (2026)
In Revere, wood and fiberglass window replacement runs $11,850–$29,450, with most paying around $20,650 — about 18% above the national average. Whole-home window replacement with premium wood or fiberglass windows — higher cost, better looks and longevity.
Updated June 2026 · Localized estimate, not a quote
Most homeowners pay around $20,650
- Typical cost
- $20,650
- Labor vs US
- +12%
- Climate
- Cold
- Local permit
- $125
Refine your estimate
Tune it to your home to narrow the wood and fiberglass window replacement range.
Key takeaways for Revere
- Revere homeowners typically pay $11,850–$29,450 for wood and fiberglass window replacement, with $20,650 the usual landing spot — about 18% above the national average.
- The +12% gap between Revere and national labor rates is the single biggest reason this price isn't the national average.
- Around $125 of the range above goes to the local Windows permit, not an extra line item.
- Schedule the replacement early — this typically holds up 30–50 years, and an emergency swap costs full price.
- Late fall and winter is the low-price window — about 5–15% under peak rates.
- Federal 25C/25D credits plus utility rebates sit below and can shave the final bill; the estimate here is pre-incentive.
What goes into the price in Revere
A typical Revere wood and fiberglass window replacement of $20,650 breaks down roughly like this — materials priced near the national level, labor set by local rates.
| Line item | Revere 2026 range |
|---|---|
| Materials & equipmentUnit, materials and supplies — priced close to the national level. | $5,300 – $13,200 |
| Labor & installationLabor to remove the old system and install the new one — this is where your city's wage index shows up. | $6,425 – $16,125 |
| Permit & feesWhat this city's building department charges for a Windows permit. | $125 |
| Total installed cost | $11,850 – $29,450 |
Split from the Revere estimate using a 55% local-labor share; line items sum to the total.
Why wood and fiberglass window replacement costs what it does in Revere
- Revere's labor rates sit about 12% higher than the national average (based on price levels for the Boston-Cambridge-Newton metro area), pushing the price up.
- Because Revere sits in a cold climate zone, wood and fiberglass window replacement costs run about 4% higher than a neutral-climate baseline.
- A Windows permit in Revere costs around $125, included above.
Wood & Fiberglass Window Replacement cost by number of windows in Revere
Wood and fiberglass windows are a premium upgrade — figure roughly $800–$2,500 per window installed depending on material, size, and finish. Cost scales with the number of openings, and wood typically runs higher than fiberglass.
| number of windows | Revere 2026 range |
|---|---|
| 5 windows | $5,400 – $13,050 |
| 10 windows | $10,700 – $23,600 |
| 15 windows | $15,950 – $33,000 |
| 20 windows | $21,250 – $42,350 |
| 25+ windows (whole home) | $25,950 – $52,900 |
National size ranges localized to Revere labor and climate.
Wood & Fiberglass Window Replacement cost by type in Revere
| Fiberglass | $11,900 – $26,000 |
| Composite | $13,050 – $27,150 |
| Aluminum-clad wood | $15,400 – $31,850 |
| Solid wood | $16,600 – $35,400 |
Adjusted to Revere from national type-level ranges.
Wood & Fiberglass Window Replacement cost by efficiency in Revere
Frame material sets the price and the look. Fiberglass is durable and low-maintenance; wood (often clad in aluminum outside) offers the richest appearance but costs more. The glass package adds on top. Prices are per window installed.
| Fiberglass frame (double-pane low-E)Strong, stable, very low maintenance | $850 – $1,750 |
| Wood frame / aluminum-clad woodPremium look; needs periodic finishing | $1,300 – $2,700 |
| Triple-pane premium (wood or fiberglass)Top efficiency and sound control | $1,750 – $3,400 |
Labor vs. materials in Revere
Install crew, removal, permit & startup — the part Revere rates move most.
Equipment & materials — priced closer to the national level.
Split based on a typical $20,650 Revere project; your mix varies with scope.
Skilled installers in the Boston-Cambridge-Newton area earn about $38.4/hr (23% above the US average, per BLS metro wage data) — the local wage is what moves the labor half of your wood and fiberglass window replacement cost.
How we estimate it
| National range | $10,000 – $25,000 |
| Revere labor adjustment | ×1.13 |
| cold climate factor | ×1.04 |
| Local permit | +$125 |
| Revere estimate | $11,850 – $29,450 |
Promo prices vs. the real cost
That per-window figure in the ad is bait to book the in-home visit — the installed price per opening runs higher once trim, flashing and disposal are counted:
- "From $189/window" teaserinstall, trim & disposal usually extra
- Financing offers$0 down · 0% APR, 12–60 mo
- Free in-home estimate$0 — it's a sales visit
- "Buy 2, get 2" / BOGO dealsdiscount is off an inflated list price
Additional wood and fiberglass window replacement costs to budget for
Some of these land on the final invoice and some never surface — it comes down to your home's age, access and existing setup.
| Old window removal & disposalPer window; usually bundled into the quote | $30 – $75 |
| Full-frame (vs. insert/pocket) replacementPer window; standard for wood to flash properly | $150 – $450 |
| Rotted sill / frame repairPer opening, found after removal | $200 – $800 |
| Custom or non-standard size / shapeBay, bow, arched, or oversized units cost more | $200 – $1,000 |
| Interior/exterior trim, casing & stainingPer window; wood often gets a stained finish | $100 – $400 |
Typical national add-on ranges; confirm locally during your quote.
What's included
- Premium wood or fiberglass windows
- Old window removal
- Interior and exterior trim
- Installation, flashing and sealing
What affects the cost
- Material (fiberglass vs solid wood vs clad)
- Custom sizing and shapes
- Number of windows
- Historic or architectural matching
Ways to save on wood and fiberglass window replacement in Revere
- Check efficiency rebates
- Use premium only where visible, vinyl elsewhere
- Bundle the whole house in one job
- Fiberglass costs less than wood with similar looks
How long does wood and fiberglass window replacement last in Revere?
Fiberglass lasts 30–50+ years; well-maintained wood can match it, but neglected wood rots far sooner.
Fiberglass is nearly maintenance-free. Wood (and the exterior of clad units) needs periodic repainting or re-staining and seal checks.
Signs you need wood and fiberglass window replacement in Revere
- Windows stick, swell, or are hard to open and close
- Fog or condensation appears between the panes (the seal has failed)
- Wood frames show rot, soft spots, peeling paint, or water staining
- You feel drafts near the window when it's shut
- They're single-pane originals and energy bills are high
- Visible warping, cracking, or daylight around the sash
- Outside noise comes through easily
Repair or replace in Revere?
Repair if…
- The wood frame is structurally sound and just needs refinishing or minor rot repair
- Only the seal, weatherstripping, or hardware has failed
- It's a historic or character window worth restoring
- The unit is under warranty
Replace if…
- Condensation is sealed between the panes (the IGU seal is gone)
- Rot has spread into the structural frame or sill
- They're single-pane and you want major energy savings
- Several windows are failing — bulk replacement lowers per-window cost
Climate-zone spec
What window rating you need in Revere, MA
Revere, MA sits in a cold climate — the Northern ENERGY STAR window zone. To qualify for ENERGY STAR (v7.0), replacement windows here should meet:
In cold climates, a low U-factor (insulating value) matters most — it cuts heat loss and heating bills. A modest solar heat gain (SHGC) is even helpful for passive winter warmth.
Thresholds from ENERGY STAR Residential Windows v7.0. Costadia groups cities into cold / mixed / hot bands — for your exact county's zone, use the ENERGY STAR Climate Zone Finder. Source.
Rebates & incentives
The federal window tax credit is gone for 2026, but ENERGY STAR windows can still earn utility rebates in some areas — and the real long-run savings come from lower heating and cooling bills.
- The federal 25C tax credit (up to $600/yr for ENERGY STAR Most Efficient windows) ended December 31, 2025 under the One Big Beautiful Bill Act — not available for 2026.
- Some utilities still rebate high-efficiency windows — real examples include Mass Save (~$75/window on single-pane replacements) and Puget Sound Energy (up to $100/window, more for income-qualified, through 2026).
- There is no federal HEAR rebate for windows (that program targets electrification equipment like heat pumps), so utility and state programs are the path — check the DSIRE database.
- The durable savings are on your energy bills: right-rated windows for your climate zone cut heating/cooling costs every year (see the climate-zone spec above).
Verified July 2026. Program budgets and windows change fast — confirm current amounts and eligibility with your utility and the DSIRE database. Costadia does not administer these programs.
Rebates & tax credits
The federal 25C window tax credit (30%, up to $600) ended December 31, 2025 and no longer applies to 2026 installs. ENERGY STAR Most Efficient wood or fiberglass windows still pay back through lower energy bills, and many utilities and states offer their own rebates — check the DSIRE database.
Cheapest time for wood and fiberglass window replacement in Revere
Window installers slow down in cold months and manufacturers run their deepest promotions in fall and winter, so off-season buyers catch both labor discounts and rebates.
Why wood and fiberglass window replacement quotes vary — and how to compare them fairly
One bid high, one low, same house? The variable is scope. Here's what pushes the figure up or down and how to get quotes you can actually compare.
Why a quote looks high (or low)
- Trim, disposal and exterior flashing/caulking may be excluded.
- Glass package (double vs. triple pane, low-E, gas fill) swings the price.
- Full-frame replacement costs more than an insert (pocket) install — make sure bids match.
Get an apples-to-apples bid
- Check warranties on frame, glass seal and labor separately.
- Confirm disposal, trim and flashing are included.
- Match the glass package and ENERGY STAR rating across quotes.
- Compare frame material on equal terms.
Questions to ask Revere Windows pros
Before you pick, make each contractor answer the same things — gaps in their replies tell you as much as the price.
- 1Is this a full-frame replacement or an insert (pocket) install?
- 2What's the glass package — double vs. triple pane, low-E coating, gas fill?
- 3Are disposal, trim, and exterior caulking/flashing included?
- 4Are the windows ENERGY STAR rated for my climate zone?
- 5What's the warranty on the frame, glass seal, and the installation labor?
Wood & Fiberglass Window Replacement in Revere
How much does wood and fiberglass window replacement cost in Revere, MA?
Expect to pay $11,850 to $29,450 for wood and fiberglass window replacement in Revere in 2026 — most quotes cluster around $20,650. Why that specific number? It reflects Revere labor rates, cold-climate demands and permit fees rather than a flat national figure.
Is wood and fiberglass window replacement more expensive in Revere than average?
Compared with the rest of the country, Revere runs about 18% higher than the national average — local labor prices at an index of 1.13 against the US average., with the local Windows permit adding roughly $125.
Do I need a permit for wood and fiberglass window replacement in Revere?
Budget about $125 for the Windows permit most Revere jobs like this require — and note it already sits inside the estimate above, not on top of it.
What affects wood and fiberglass window replacement cost the most?
Whole-home window replacement with premium wood or fiberglass windows — higher cost, better looks and longevity. From there, a handful of specifics push the final number up or down. Grade of equipment and materials tops the list, followed by home size and complexity, local labor, and the cold climate zone.
How much should new windows really cost you?
A window quote bundles three separate purchases into one number: the frame, the glass, and the labor to set it right. Knowing which of the three actually moves comfort and bills is what keeps the money from landing in the wrong place.
The install case
A perfect window installed badly leaks and fails. Full-frame replacement with proper flashing beats a cheap pocket insert in a rotted opening — match the install method to your home's condition, not just the price.
The efficiency case
Extreme climates are the one setting where premium glazing pays for itself over the years: triple-pane and gas-fill packages hold indoor temperatures steadier and trim the utility bill, with rebate eligibility a possible bonus on ENERGY STAR models. Between a better frame and better glass, the glass is where the payback lives.
The value case
For a whole-home replacement on a fixed budget, vinyl frames with double-pane low-E glass capture nearly all the comfort and efficiency gains at the lowest entry point. Stepping up to fiberglass or triple glazing buys diminishing returns most homeowners never actually notice.
Vinyl frames are the sensible default unless your situation says otherwise; the glass package is where climate-specific spending pays off. Install quality is the one place a discount always costs more later.
Editorial analysis by Serhat Özçelik, reviewed by Costadia Editorial. These are our own cost perspectives, not third-party endorsements.
How we calculated this estimate
We start with 2026 national wood and fiberglass window replacement ranges compiled from contractor-pricing sources (Angi, HomeGuide, Fixr and EnergySage averages), then localize them to Revere using the BLS metro wage data labor index (×1.13 here), the IECC cold-climate factor (×1.04) and a typical local permit fee (≈$125). Federal incentive details reference the IRS Inflation Reduction Act (25C/25D) and DSIRE.
This is a planning estimate, not a quote.Actual prices vary with your home's condition, equipment grade and contractor — always confirm with licensed local pros before budgeting.
References & data sources
Our Revere wood and fiberglass window replacement estimate is built from these primary, mostly government sources — not a single aggregator.
- Occupational Employment & Wage Statistics (metro wages) — U.S. Bureau of Labor Statistics.Metro-level trade wages behind each city's labor index.
- Regional Price Parities (state & metro) — U.S. Bureau of Economic Analysis.Regional price levels used where metro wage data is unavailable.
- IECC Climate Zones — U.S. DOE — Building Energy Codes Program.Climate-zone factors applied to weather-sensitive projects.
- Home Energy Tax Credits (25C / 25D) — Internal Revenue Service.Federal rebate and tax-credit figures for eligible upgrades.
- Database of State Incentives for Renewables & Efficiency — DSIRE — NC State University.State and utility incentive programs by ZIP code.
Wood and fiberglass window replacement alternatives in Revere
Homeowners in Revere often pair this with
A wood and fiberglass window replacement rarely happens in isolation — these projects commonly come up alongside it.
Other projects in Revere
Browse local 2026 costs for every home project in Revere, MA.